• ETRI Journal
• /
• 제18권4호
• /
• pp.315-338
• /
• 1997

We extend our previous theoretical analysis of electronic and optical properties of p-type quantum well structures based on the two heavy- and light-hole system to include all the three valence bands. These theories are then used to clarify the origin of the normal incidence absorption and photo current at photon wavelengths of 2 - 3 ${\mu}m$, which was observed in addition to the absorption around 8 ${\mu}m$ by a recent experimental investigation with heavily doped p-type GaAs/AlGaAs multi-quantum well (MQW) structures. In the theoretical analysis, the Hartree and exchange-correlation many-body interactions are taken into account within one-particle local density approximation, and it is shown that normal incidence absorption occurs in two wavelength regions over the transition energy range higher than barrier height for p-type GaAs/AlGaAs superlattices with well doping of $2{\times}10^{19}\;cm^{-3}$; one region has broad absorption peaks with coefficients of about 5000 $cm^{-1}$ around 8 ${\mu}m$, and the other has two rather sharp peaks at 2.7 ${\mu}m$ and 3.4 ${\mu}m$ with 1800 $cm^{-1}$ and 1300 $cm^{-1}$, respectively. The result indicates that the theory explains the experimental observation well, as the theoretical and experimental results are in close agreement in general absorption features.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권10호
• /
• pp.5035-5057
• /
• 2019

Advancements in nanotechnology and novel nano materials in the past decade have provided a set of tools that can be used to design and manufacture integrated nano devices, which are capable of performing sensing, computing, data storing and actuation. In this paper, we have proposed cooperative nano communication using Power Switching Relay (PSR) Wireless Power Transfer (WPT) protocol and Time Switching Relay (TSR) WPT protocol over independent identically distributed (i.i.d.) Rayleigh fading channels in the Terahertz (THz) Gap frequency band to increase the range of transmission. Outage Probability (OP) performances for the proposed cooperative nano communication networks have been evaluated for the following scenarios: A) A single decode-and-forward (DF) relay for PSR protocol and TSR protocol, B) DF multi-relay network with best relay selection (BRS) for PSR protocol and TSR protocol, and C) DF multi-relay network with multiple DF hops with BRS for PSR protocol and TSR protocol. The results have shown that the transmission distance can be improved significantly by employing DF relays with WPT. They have also shown that by increasing the number of hops in a relay the OP performance is only marginally degraded. The analytical results have been verified by Monte-Carlo simulations.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권1호
• /
• pp.78-82
• /
• 2014

Power Transformers with more than one secondary winding are not uncommon in industrial applications. But new classes of applications where very large number of independent secondaries are used are becoming popular in controlled converters for medium and high voltage applications. Cascade H-bridge medium voltage drives and Pulse Step Modulation (PSM) based high voltage power supplies are such applications. Regulated high voltage power supplies (Fig. 1) with 35-100 kV, 5-10 MW output range with very fast dynamics (${\mu}S$ order) uses such transformers. Such power supplies are widely used in fusion research. Here series connection of isolated voltage sources with conventional switching semiconductor devices is achieved by large number of separate transformers or by single unit of multi-secondary transformer. Naturally, a transformer having numbers of secondary windings (~40) on single core is the preferred solution due to space and cost considerations. For design and simulation analysis of such a power supply, the model of a multi-secondary transformer poses special problem to any circuit analysis software as many simulation softwares provide transformer models with limited number (3-6) of secondary windings. Multi-Secondary transformer models with 3 different schemes are available. A comparison of test results from a practical Multi-secondary transformer with a simulation model using magnetic component is found to describe the behavior closer to observed test results. Earlier models assumed magnetising inductance in a linear loss less core model although in actual it is saturable core made-up of CRGO steel laminations. This article discusses a more detailed representation of flux coupled magnetic model with saturable core properties to simulate actual transformers very close to its observed parameters in test and actual usage.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권5호
• /
• pp.2427-2445
• /
• 2016

In contrast to traditional "store-and-forward" routing mechanisms, network coding offers an elegant solution for achieving maximum network throughput. The core idea is that intermediate network nodes linearly combine received data packets so that the destination nodes can decode original files from some authenticated packets. Although network coding has many advantages, especially in wireless sensor network and peer-to-peer network, the encoding mechanism of intermediate nodes also results in some additional security issues. For a powerful adversary who can control arbitrary number of malicious network nodes and can eavesdrop on the entire network, cryptographic signature schemes provide undeniable authentication mechanisms for network nodes. However, with the development of quantum technologies, some existing network coding signature schemes based on some traditional number-theoretic primitives vulnerable to quantum cryptanalysis. In this paper we first present an efficient network coding signature scheme in the standard model using lattice theory, which can be viewed as the most promising tool for designing post-quantum cryptographic protocols. In the security proof, we propose a new method for generating a random lattice and the corresponding trapdoor, which may be used in other cryptographic protocols. Our scheme has many advantages, such as supporting multi-source networks, low computational complexity and low communication overhead.

• 대한전자공학회논문지SD
• /
• 제43권12호
• /
• pp.23-32
• /
• 2006

다층 고속 디지털 보드에 대한 빠르고 정확한 전압 버스 설계 방법은 정확하고 정밀한 고속 보드에 전원 공급망 설계 방법을 위해 고안되었다. FAPUD는 PBEC(Path Based Equivalent Circuit)모델과 망 합성 방법의 두 중요 알고리즘을 기반으로 구성된다. PBEC 모델 기반의 회로 레벨의 2차원 전원 분배 망의 전기적 값으로부터 lumped 1차원 회로 모델로 간단한 산술 표현들을 활용한다 제안된 PBEC 기반인 회로 단계 설계는 제안한 지역 접근법을 이용해 수행된다. 이 회로 단계 설계는 온칩 디커플링 커패시터의 크기, 오프칩 디커플링 커패시터의 위치와 크기, 패키지 전압 버스의 유효한 인덕턴스를 직접 결정하고 계산한다. 설계 출력에 따라 모든 디커플링 커패시터가 포한된 lumped 회로 모델과 전압 버스의 레이아웃은 FAPUD 방법을 이용한 후 얻을 수 있다. 미세조정 과정에서, I/O Switching에 의해 덧붙여진 Simultaneous Switching Noise(SSN)를 고려한 보드 재 최적화가 수행될 수 있다 이는 전원 공급 잡음에 I/O 동작 효과가 lumped 회로 모델을 가지고 전 동작 주파수 범위에 대해 추산될 수 있기 때문이다. 게다가 만약 설계에 조정이 필요하거나 교체해야 한다면, FAPUD 방법은 다른 전면 설계변경 없이 디커플링 커패시터들을 대체하여 설계를 수정하는 것이 가능하다. 마지막으로 FAPUD 방법은 전형적인 PEEC 기본설계 방법과 비교해 정확하고 FAPUD 방법의 설계 시간은 전형적인 PEEC 기본 설계 방법의 시간보다 10배가 빠르다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.33-36
• /
• 2000

Multi-protocol Label Switching is a comparatively new technology based on the association of labels with routes and the use of labels to forward packets. MPLS can be used for transport of any level 3 protocol over any level 2 technology. Differentiated Services define a model for implementing scalable differentiation of QoS in the Internet. The inherent characteristics of MPLS make it a very good candidate for providing Differentiated Services. In this paper we describe various approaches which can be used to support differentiated services in MPLS environments.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.109-112
• /
• 1999

In this paper, we propose more effective method of label allocation on Multi-Protocol Label Switching (MPLS) which is IP over ATM integrated model. We research the problems, one is using downstream label allocation method case, the other is using both downstream and upstream label allocation method. Easily we can solve this problem through the downstream-on-demand label allocation method with RSVP(Resource ReSerVation Protocol). In experiment we can find 1.5~28% error which will be fixed by using downstream-on-demand label allocation method.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.116-117
• /
• 2000

전광 네트워크(All-optical Network)에서 중요한 기능을 담당하는 전광 교환기는 전광 교환 소자 (All-optical Switching Element)로 이루어져 있는데, 각 교환 소자들은 스위칭 모듈(SM), 라우팅 제어 처리기(RCP), 헤더 처리 모듈(HPM), 그리고 입/출력 인터페이스 모듈(IIM, OIM)로 이루어져 있다. 스위칭 시스템 내에 도착하는 패킷은 원하는 스위치의 출력단에 도착하기 전에 많은 교환 소자(SE)들을 지나가게 되는데, 이 때 수많은 패킷들이 서로 충돌하게 되며, 이 과정에서 패킷이 손실된다. (중략)

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권2호
• /
• pp.494-513
• /
• 2019

A multi-channel access problem based on hypergraph model in ultra-dense small cell networks is studied in this paper. Due to the hyper-dense deployment of samll cells and the low-powered equipment, cumulative interference becomes an important problem besides the direct interference. The traditional binary interference model cannot capture the complicated interference relationship. In order to overcome this shortcoming, we use the hypergraph model to describe the cumulative interference relation among small cells. We formulate the multi-channel access problem based on hypergraph as two local altruistic games. The first game aims at minimizing the protocol MAC layer interference, which requires less information exchange and can converge faster. The second game aims at minimizing the physical layer interference. It needs more information interaction and converges slower, obtaining better performance. The two modeled games are both proved to be exact potential games, which admit at least one pure Nash Equilibrium (NE). To provide information exchange and reduce convergecne time, a cloud-based centralized-distributed algorithm is designed. Simulation results show that the proposed hypergraph models are both superior to the existing binary models and show the pros and cons of the two methods in different aspects.

• 전기전자학회논문지
• /
• 제1권1호
• /
• pp.83-92
• /
• 1997

대용량 스위칭 스루풋 요구를 만족시키면서 초고속 라인 속도를 처리해야하는 대용량. 초고속 ATM 스위칭 구조설계에는 다수경로 특성을 갖는 구조를 이용한다. 그러나 다수경로 특성을 갖는 스위칭 구조에서는 순서바뀜현상이 피할 수 없이 발생한다. 이 논문에서는 다수경로 스위칭 구조의 특성을 분석하여 순서 바뀜 가능성을 정량적으로 분석해볼 수 있는 분석모델을 제안한다. 그리고 이 모델을 이용하여 다수경로 스위치의 구조 파라메타들과 셀 순서바뀜현상과의 관계를 분석한다. 이 파라메타로는 다수경로의 수 (L), 입력 셀스트림의 특성, 스위치 크기(N), 및 트렁크를 구성하는 가상회선 수($V_{ch}$)등이며, 다수경로가 순서바뀜현상을 일으킬 때에 미치는 영향을 분석한다.