• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.419-422
• /
• 2007

This paper, designed UWB elliptical slot antenna and analysis based on the distribution of the electromagnetic fields pattern and resonant mode of designed antenna is presented. Designed antenna is fabricated on FR4 substrate with thickness of 1.524mm and relative dielectric constant 4.4. The measured bandwidth of $3.6GHz{\sim}20GHz$ for VSWR<2. Through the field pattern and resonant mode analysis that the slot antenna operates on a series of the multi-pole radiation based on TE modes matched to system impedance. And the perfect magnetic wall is along the axis of symmetry on the y-z plane. This result gives us an easier method to design the similar antennas, which is the impedance matching to the system impedance after once constructing a proper structure with a series of multi-mode resonances.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.163-177
• /
• 2021

Numerical simulations of the Vortex-Induced Vibration (VIV) about a large-scale flexible pipe subject to shear flow were carried out in this paper. Efficiency verification was performed firstly, validating that the proposed fluid-structure interaction solution strategy is competent in predicting the VIV response. Then, the VIV characteristics related to multi-mode and spanwise hybrid waveform about the flexible pipe attributed to shear flow were investigated. When inflow velocity rises, higher vibration modes are apt to be excited, and the spanwise waveform easily convertes from a standing-wave-dominated status to a hybrid standing-traveling wave status. The multi-mode or even multiple-dominant-mode is prone to occur, that is, the dominant mode is often followed by several apparent subordinate modes with considerable vibration energy. Hence, the shedding frequencies no longer obey Strouhal law, and vibration trajectories become intricate. According to the motion analysis concerning the coupled cross-flow and in-line vibrations, as well as the corresponding wake patterns, a tight coupling interaction exists between the structural deformation and the wake flow behind the flexible pipe. In addition, the evolution of the vortex tube along the pipe span and a strong 3D effect are observed due to the slenderness of the flexible pipe and the variability of the vortex shedding attributed to the shear flow.

• 한국통신학회논문지
• /
• 제33권6B호
• /
• pp.403-410
• /
• 2008

본 논문에서는 Non-transparent 모드 MMR 시스템의 성능을 분석한다. Non-transparent MMR 시스템은 Single-frame(in band)와 Multi-frame(out band) 두 가지의 전송 방식을 갖는데 모드에 따라 프레임 구조가 다르기 때문에 그에 따른 성능 또한 달라질 수 있다. 성능 분석은 각 모드에 따른 지연, 프레임의 효율, RS (Relay Station) 를 사용한 최대 홉 수로 나타냈다. 지연과 프레임 효율의 경우 BS (Base Station) 의 커버리지와 RS의 커버리지의 비율 값, RS의 개수를 변화시키면서 성능을 분석한다. 그리고 분석을 위해 BS, MS (Mobile Station), 그리고 RS 간의 채널 간섭은 없고 각각의 커버리지는 원으로 가정한다. 결과를 통해 single-frame 방식이 multi-frame 방식보다 효율적임을 알 수 있다. 향후 IEEE802.16j MMR 환경뿐만 아니라 차세대 이동통신망에서 릴레이를 사용하여 휴대 인터넷 서비스 지역과, 셀룰러 망을 넓히는데 있어 참고할 만한 가이드라인이 될 수 있을 것이다.

• 한국철도학회논문집
• /
• 제14권1호
• /
• pp.24-30
• /
• 2011

최저 안전율 또는 최대 파괴확률을 기반으로 하는 기존의 사면안정해석에 대하여, 지반물성과 해석모델이 갖는 고유 불확실성을 최소화하고, 사면안정해석에서 다양한 안정해석모델과 그에 따른 파괴형상을 반영할 수 있도록 다중 파괴모드에 대한 동시 파괴확률을 고려한 사면의 신뢰성해석기법을 제안하였다. 붕괴현장조사를 통하여 현장에서 가장 빈번하게 발생하는 파괴형식을 다파괴모드로 정의하였다. 동시 파괴확률의 산정에는 체계 신뢰성해석분야에서 최근 도입된 선형계획법에 의한 최적화를 이용하였으며, 이를 통하여 여러 가지 해석모델을 신뢰성 기반으로 동시에 고려하여 해석할 수 있다. 이 방법의 적용성 평가를 위하여 기존 문헌에서 나타난 제방에 대한 신뢰성해석 결과와 비교하였다. 다중 파괴모드에 대한 동시 파괴확률을 고려한 사면의 신뢰성 해석을 적용한 결과, 전체 시스템에 대한 대한 안정성을 정량적으로 산출할 수 있음을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.210-213
• /
• 1991

The clamp mode Zero-Volatge-Switched Multi-Resonant-Converter(ZVS-MRC) is proposed. In the converter, the performance of the conventional ZVS-MRC is improved by clamping the drain-to-source voltage of the power switch using a soft switching nondissipative active clamp network. The analysis for each stage of the converter operation modes is presented and is verified by experiments.

• 산업기술연구
• /
• 제17권
• /
• pp.213-218
• /
• 1997

This study is concerned with characteristics of bending collapse of aluminum members with multi-cell section. Aluminum is light so it is compatible of being used for vehicle structures members. Bending collpase behaviors of aluminum members with multi-cell section are very complex and tension failure mode are occured in experiment. In this paper, the aluminum members are modeled to be able to represent the tension failure mode and, characteristics of bending collapse of aluminum members with multi-cell section by experimental method are compared with the results of PAM-CRASH.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1436-1439
• /
• 2002

In this paper, based on the data link model characterized by the spaceborne small SAR system, the high rate multi-channel data link module is designed including link storage, link processor, transmitter, and wide-angle antenna. The design results are presented with the performance analysis on the data link budget as well as the multi-mode data rate in association with the SAR imaging mode of operation from high resolution to the wide swath.

• Wind and Structures
• /
• 제6권5호
• /
• pp.387-402
• /
• 2003

In the past decades, much effort has been made towards the study of single-mode-based vibration controls with dynamic energy absorbers such as single or multiple Tuned Mass Dampers(TMDs). With the increase of bridge span length and the tendency of the bridge cross-section being more slender and streamlined, multi-mode coupled vibrations as well as their controls have become very important for large bridges susceptible to strong winds. As a simple but effective device, the TMD system especially the semi-active one has become a promising option for such coupled vibration controls. However, despite various studies of optimal controls of single-mode-based vibrations with TMDs, research on the corresponding controls of the multi-mode coupled vibrations is very rare so far. For the development of a semi-active control strategy to suppress the multi-mode coupled vibrations, a comprehensive parametric analysis on the optimal variables of this control is substantial. In the present study, a multi-mode control strategy named "three-row" TMD system is discussed and the general numerical equations are developed at first. Then a parametric study on the optimal control variables for the "three-row" TMD system is conducted for a prototype Humen Suspension Bridge, through which some useful information and a better understanding of the optimal control variables to suppress the coupled vibrations are obtained. This information lays a foundation for the design of semi-active control.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.36-37
• /
• 2003

Three-dimensional numerical analysis of the flow around rectangular cylinders with various side ratios, D/H, from 0.2 to 2.0 is carried out for Reynolds number of 1000 by using multi-directional finite difference method in multi-grid. The predicted results are well compared with the experimental data. It is found that fluid dynamics characteristics alternate between high pressure mode. and low pressure mode of the base pressure for rectangular cylinder of D/H=0.2-0.6.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.134-136
• /
• 2006

This paper presents the generalized and explicit expressions for evaluating the performance of the multi-phase interleaved boost converter in discontinuous inductor current mode. Furthermore, the generalized transfer functions of interest are presented and the dynamic characteristics are analyzed The generalized analysis of converter performance is verified through the experimental and simulation results.