• Structural Engineering and Mechanics
• /
• 제58권1호
• /
• pp.103-119
• /
• 2016

Multi-storey frame structures are frequently exposed to static and dynamic forces. Therefore analyses of static (buckling) and dynamic stability come into prominence for these structures. In this study, the effects of number of storey, static and dynamic load parameters, crack depth and crack location on the in-plane static and dynamic stability of cracked multi-storey frame structures subjected to periodic loading have been investigated numerically by using the Finite Element Method. A crack element based on the Euler beam theory is developed by using the principles of fracture mechanics. The equation of motion for the cracked multi-storey frame subjected to periodic loading is achieved by Lagrange's equation. The results obtained from the stability analysis are presented in three dimensional graphs and tables.

• 한국산학기술학회논문지
• /
• 제11권9호
• /
• pp.3176-3183
• /
• 2010

본 논문은 다축 하중을 받는 복합재 압력용기의 멀티 스케일 피로수명 예측 방법을 제시하였다. 멀티 스케일 접근법은 복합재료의 기본 구성재료인 섬유, 기지 및 섬유/기지 경계면의 거동으로부터 복합재 플라이, 적층판 및 구조물의 전체 거동을 예측한다. 멀티 스케일 피로수명은 거시적 응력 해석과 미시적 피로파손 해석을 통해 예측된다. 유한요소법을 이용하여 복합재 압력용기의 적층판에 가해지는 다축 피로하중을 구하며, 고전적층판이론을 이용하여 적층판의 플라이 응력을 계산하였다. 미소역학 모델을 이용하여 플라이 응력으로부터 각각 섬유, 기지 및 섬유/기지 경계면에 발생되는 응력을 계산하였다. 복합재 구성재료의 피로수명은 섬유에 대해서는 최대응력법을, 기지에 대해서는 등가응력법을, 섬유/기지 경계면에 대해서는 임계평면법을 사용하였다. 평균응력을 고려하기 위하여 수정된 Goodman 식을 적용하였다. 모든 피로하중에 의한 손상은 Miner 법칙을 이용하여 선형 누적이 되고, 이를 통해 최종 피로파손을 판단한다. 섬유와 기지의 물성값, 섬유체적비 및 와인딩 각도의 확률분포에 따른 복합재 압력용기의 피로수명 영향을 분석하기 위해 몬테카르로 시뮬레이션을 수행하였다.

• Structural Engineering and Mechanics
• /
• 제78권3호
• /
• pp.281-296
• /
• 2021

This article analyzed the modulus degradation of concrete subjected to multi-level compressive cyclic loading. The evolution of secant elastic modulus is investigated based on measurements from top loading platen and LVDT in the middle part of concrete. The difference value of the two secant elastic moduli is reduced when close to failure and could be used as a fatigue failure precursor. The fatigue hardening is observed for concrete during cyclic loading. When the maximum stress is smaller the fatigue hardening is more obvious. The slight increase of maximum stress will lead to the "periodic hardening". The tangent elastic modulus shows a specific "bowknot" shape during cyclic loading, which can characterize the hysteresis of stress-strain and is influenced by the cyclic loading stresses. The deterioration of secant elastic modulus acts a similar role with respect to the P-wave speed during cyclic loading, can both characterize the degradation of the concrete properties.

• 지질공학
• /
• 제19권2호
• /
• pp.165-175
• /
• 2009

본 연구는 대구지역에 분포하는 함안층내 적색 셰일에 대하여 단일단계 크리프 시험과 다단계 크리프 시험을 수행하여 대상 암석의 크리프 특성을 규명한 것이다. 획득된 전체 데이터를 회귀분석하여 Griggs(1936)가 제시한 수식 ${\epsilon}_t$=a+$b{\cdot}log$ t +$c{\cdot}t$의 각 크리프 상수값을 도출하였다. 또한 1차, 2차 크리프의 전이시간(Tt)은 d/dt($b{\cdot}log$ t)=d/dt($c{\cdot}t$) 되는 시간으로 하였다. 세 번의 다단계 크리프 시험으로 재하하중과 크리프 상수간의 관계식을 도출하였으며, 획득된 크리프 상수값과 시료파괴시의 최대 변형률에 따라 각 재하하중에서의 시료파괴 예상시간(Ft)을 예상하였다.

• 국제강구조저널
• /
• 제18권5호
• /
• pp.1525-1540
• /
• 2018

A test rig with multi-functional purposes was specifically designed and manufactured to study the behavior of multi-planar welded tubular joints subjected to multi-planar concurrent axial loading. An experimental investigation was conducted on full-scale welded tubular joints with each consisting of one chord and eight braces under monotonic loading conditions. Two pairs or four representative specimens (two specimens for each joint type) were tested, in which each pair was reinforced with two kinds of different internal stiffeners at the intersections between the chords using welded rectangular hollow steel sections (RHSSs) and the braces using rolled circular hollow steel sections (CHSSs) and welded RHSSs. The effects of different internal stiffeners at the chord-brace intersection on the load capacity of joints under concurrent multi-planar axial compression/tension are discussed. The test results of joint strengths, failure modes, and load-stress curves are presented. Finite element analyses were performed to verify the experimental results. The study results show that the two different joint types with the internal stiffeners at the chord-brace intersection under axial compression/tension significantly increase the corresponding ultimate strength to far exceed the usual design strength. The load carrying capacity of welded tubular joints decreases with a higher degree of the manufacturing imperfection in individual braces at the tubular joints. Furthermore, the interaction effect of the concurrent axial loading applied at the welded tubular joint on member stress is apparent.

• Smart Structures and Systems
• /
• 제26권3호
• /
• pp.373-390
• /
• 2020

Hybrid simulation (HS) is a versatile tool for structural performance evaluation under dynamic loads. Although real structural responses are often multiple-directional owing to an eccentric mass/stiffness of the structure and/or excitations not along structural major axes, few HS in this field takes into account structural responses in multiple directions. Multi-directional loading is more challenging than uni-directional loading as there is a nonlinear transformation between actuator and specimen coordinate systems, increasing the difficulty of suppressing loading error. Moreover, redundant actuators may exist in multi-directional hybrid simulations of large-scale structures, which requires the loading strategy to contain ineffective loading of multiple actuators. To address these issues, lately a new strategy was conceived for accurate reproduction of desired displacements in bi-directional hybrid simulations (BHS), which is characterized in two features, i.e., iterative displacement command updating based on the Jacobian matrix considering nonlinear geometric relationships, and force-based control for compensating ineffective forces of redundant actuators. This paper performs performance validation and application of this new mixed loading strategy. In particular, virtual BHS considering linear and nonlinear specimen models, and the diversity of actuator properties were carried out. A validation test was implemented with a steel frame specimen. A real application of this strategy to BHS on a full-scale 2-story frame specimen was performed. Studies showed that this strategy exhibited excellent tracking performance for the measured displacements of the control point and remarkable compensation for ineffective forces of the redundant actuator. This strategy was demonstrated to be capable of accurately and effectively reproducing the desired displacements in large-scale BHS.

• 한국정보통신학회논문지
• /
• 제14권1호
• /
• pp.167-176
• /
• 2010

여러 과정을 통해 만들어진 수많은 데이터는 효율적으로 관리되기 위해서 DBMS의 도움이 절대적으로 필요하다. 네트워크 내부 또는 외부에서 오는 이러한 데이터는 실시간 또는 일괄적으로 데이터베이스에 삽입(insertion)이 된다. 다량의 데이터 삽입은 흔히 개별적인 DBMS에서 지원하는 특정 대용량 로딩 또는 삽입기능을 통해 수행된다. 본 논문에서는 다층 구조로 구성되어 있는 이기종 시스템의 대용량 데이터 로딩을 분석하고 평가하며 프로그램 삽입에서의 DBMS 대용량 로더의 결과와 비교한다. 또한 대용량 로딩의 성능을 쉽게 향상 시킬 수 있는 staging 데이터베이스를 사용한 하이브리드 방법을 제안한다.

• 제어로봇시스템학회논문지
• /
• 제11권9호
• /
• pp.816-821
• /
• 2005

The remote operation of $4\~5$ cranes for container loading/unloading at a port by one operator will dramatically improve loading/unloading efficiency through productivity increase, cost reduction, and so on. This study develops a remote crane control system for container loading/unloading yard cranes. First, a wireless video and audio system to transmit views and sounds of the working field is designed by using 3 web cameras and a microphone. Next, a RSVP-based multi-path reservation method is presented with a view to improving the quality of service in the communication network for remote control. Simulation results show that a RSVP-based multi-path reservation can enhance the reservation success rate in the TCP/IP network.

• 전기의세계
• /
• 제22권1호
• /
• pp.20-27
• /
• 1973

The multi-group diffusion theory is applied to the analysis of the currently constructing Kori reactor core which is to be refuelled by 3-region fuel loading pattern and also to the comparative study on a conceptually designed 5-region reactor core, under the condition that, apart from the thermal-hydraulic considerations, all the input data referred to here in are assumed to be identical for both cases. The numerical calculation is carried out for quantitative analysis of the characteristics of the two fuel loading patterns in details, and the calculated results show that, so far as the nuclear aspects are concerned, the characteristics of the 5-region reactor core are proved to be superior to those of Kori's 3-region reactor core in general.

• 한국공간구조학회논문집
• /
• 제15권4호
• /
• pp.73-80
• /
• 2015

The new rotary friction damper was developed using several two-nodal rotary frictional components with different clamping forces. Because of these components, the rotary friction damper can be activated by building movements due to lateral forces such as a wind and earthquake. In this paper, various dependency tests such as displacement amplitude, forcing frequency and long term cyclic loading were carried out to evaluate on the structural performance and the multi-slip mechanism of the new damper. Test results show that the multi-slip mechanism is verified and friction coefficients are dependent on displacement amplitute and forcing frequency except long term cyclic loading.