• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.11
• /
• pp.680-688
• /
• 2005

The electrical current generated by heart creates not only electric potential but also a magnetic field. We have observed electrophysiological phenomena of the heart by measuring components of magnetocardiogram(MCG) using 61 channel superconducting quantum interference device(SQUD) system. We have analyzed the possibility and characteristics of MCG parameters for diagnosis of ischemic heart disease. A technique for automatic analysis of MCG signals in time domain was developed. The methods for detecting the position, the interval, the amplitude ratio, and the direction of single current dipole were examined in the MCG wave. The position and interval parameters were obtained by calculating the gradients of a envelope curve which could be formed by the difference between the maximum and minimum envelope of multi-channel MCG signals. We show some differences of the frequency contour map between the normal MCG and the abnormal (ischemic heart disease) MCG. The direction of single current dipole can be defined by rotating the magnetic field according to Biot-Savart's law at each point of MCG signals. In this study, we have examined the direction of single current dipole from searching for the centroids of positive and negative magnetic fields. The amplitude ratio parameters for measuring 57 deviation consisted of A$_{T}$/A$_{R}$ and other ratios. and We developed a new analysis method, which is based on the frequency contour map of electromagnetic field. Using theses parameters, we founded significant differences between normal subjects and ischemic patients in some parameters.

• Korea Journal of Hospital Management
• /
• v.22 no.4
• /
• pp.50-60
• /
• 2017

Purposes: The purpose of this study was to identify the preferred types of the hospital reservation cancellation management to help reduce the reservation cancellations. Methodology: This study sampled 327 outpatients or their guardians who had reserved a university hospital and a general hospital located in the southwestern part of Seoul, and the responses from 300 of them were used for the final analysis. The subjects' preferences of reservation cancellation management types were analyzed in reference to their demographic variables. The timing and frequency of pre-notification preferred by the subjects were examined. A multidimensional scaling methods and correspondence analysis was used to identify preference for management methods of no-show and type of reservation guide. Findings: As a result, 77.3% of the respondents were perceived that the reservation cancellation was a habit. The most preferred method of managing the reservation cancellation would be refusal to refund the reservation deposit (61.7%), followed by payment for cancellation (16.0%), limit of future reservations (16.0%) and penalty (6.3%) in their order. 186 of the subjects (62.0%) preferred the texting for prevention of reservation cancellations, and 102 of the subjects (34.0%) preferred the phone calls. The preferred timing and frequency of the SMS were twice 3 days before, once a day before and three times 7 days before, while the preferred timing and frequency of phone call was once a day before. Practical Implications: The no-show rate can be improved by enhancing SMS pre-notification and by improving afterwards telephone counseling. For other factors, it needs to study on the service differentiation with the characteristics of each patient group.

• Steel and Composite Structures
• /
• v.38 no.5
• /
• pp.477-496
• /
• 2021

The main objective of this paper is to study vibration of sandwich open cylindrical panel with damaged core and FG face sheets based on three-dimensional theory of elasticity. The structures are made of a damaged isotropic core and two external face sheets. These skins are strengthened at the nanoscale level by randomly oriented Carbon nanotubes (CNTs) and are reinforced at the microscale stage by oriented straight fibers. These reinforcing phases are included in a polymer matrix and a three-phase approach based on the Eshelby-Mori-Tanaka scheme and on the Halpin-Tsai approach, which is developed to compute the overall mechanical properties of the composite material. Three complicated equations of motion for the panel under consideration are semi-analytically solved by using 2-D differential quadrature method. Several parametric analyses are carried out to investigate the mechanical behavior of these multi-layered structures depending on the damage features, through-the-thickness distribution and boundary conditions. It is seen that for the large amount of power-law index "P", increasing this parameter does not have significant effect on the non-dimensional natural frequency parameters of the FG sandwich curved panel. Results indicate that by increasing the value of isotropic damage parameter "D" up to the unity (fully damaged core) the frequency would tend to become zero. One can dictate the fiber variation profile through the radial direction of the sandwich panel via the amount of "P", "b" and "c" parameters. It should be noticed that with increase of volume fraction of fibers, the frequency parameter of the panels does not increase necessarily, so by considering suitable amounts of power-law index "P" and the parameters "b" and "c", one can get dynamic characteristics similar or better than the isotropic limit case for laminated FG curved panels.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.5
• /
• pp.49-59
• /
• 2022

The SHAPE algorithm has the advantage of being able to shape the pulse spectrum as desired and design it not to distort other characteristics, so it was used in the active sonar pulse design. In this paper, we propose a pulse design using the SHAPE algorithm for a multi-static sonar system to reduce the cross-correlation between frequency-adjacent pulses and prevent the performance degradation of the pulses themselves. The boundary function of the SHAPE algorithm is set to be limited to the pulse bandwidth. As a result of applying the proposed design method to the sinusoidal frequency modulated pulse, the peak cross-correlation level (PCCL), which means the degree of cross-correlation, was reduced by 44.23 dB. Although the PCCL decreased by several tens of dB, no significant change in the ambiguity function was observed, and the integrated sidelobe level (ISL), which means the average value of the side lobe, increased by 11.64 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.1
• /
• pp.11-19
• /
• 2013

In this paper, we designed and implemented the planar monopole antenna using the coupling effect for the multi-band characteristic. A parasitic element for the multi-band characteristic based on a rectangular patch with single resonance is inserted. Spiral shaped parasitic element is used for minimizing the antenna size and obtaining the multi-resonance characteristic. The frequency characteristics are modified and optimized by varying specific parameters. By inserting an L-shaped resonator at both sides of the feed line which connected through the via hole to the ground plane, unnecessary frequency bands are eliminated. Proposed antenna dimension is $40{\times}60{\times}1mm^3$. It is fabricated on the FR-4 substrate(${\varepsilon}_r$=4.4) using a microstrip line of $50{\Omega}$ for impedance matching. By measurement results, the characteristic of the return loss under -10 dB are 1.714~2.496 GHz, 2.977~4.301 GHz, and 4.721~6.315 GHz, and the radiation patterns have omni-directional shapes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.3
• /
• pp.336-344
• /
• 2011

The purpose of this study is to analyze the radiation-pattern characteristics above 1 GHz for the electromagnetic wave radiated from multi-slot such as ventilations, etc. on the enclosure of an EUT and so to make recommendations for suitable test methods. An experimental EUT was formed by putting a comb-generator at the center of a rectangular enclosure with 4 slots, and its radiation pattern was analyzed in the frequency range of 1~6 GHz. As analysis results, multi-lobe appears above 2 GHz and the number of multi-lobes is growing as the frequency increases. And real radiated-emission measurements were performed for the experimental EUT by scanning a receiving antenna in the height of 1~4 m and tilting toward maximum radiation, as well as setting the height of a receiving antenna to the central position of the EUT which is prescribed at the present standards. The measured results are +12.8 dB in the scanning and +16.4 in the scanning and tilting compared with the present standard test method. Therefore, the latter must be revised in order to consider the radiation pattern above 1 GHz.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.589-598
• /
• 2004

We propose a new algorithm to extract the fetal electrocardiogram (FECG) from a multi-channel electrocardiogram (ECG) recorded at the chest and abdomen of a pregnant woman. To extract the FECG from the composite abdominal ECG, the classical time-domain method based on singular value decomposition (SVD) has been generally used. However, this method has some disadvantages, such as its high degree of computational complexity and the necessary assumption that vectors between the FECG and the maternal electrocardiogram (MECG) should be orthogonal. The proposed algorithm, which uses SVD in a discrete cosine transform (DCT) domain, compensates for these disadvantages. To perform SVD with lower computational complexity, DCT coefficients corresponding to high-frequency components were eliminated on the basis of the properties of the DCT coefficients and the frequency characteristics of the FECG. Moreover, to extract the pure FECG with little influence of the direction of the vectors between the FECG and MECG, three new channels were made out of the MECG suppressed in the composite abdominal ECG, and the new channels were appended to the original multi-channel ECG. The performance of the proposed algorithm and the classical time-domain method based on SVD were compared using simulated and real data. It was experimentally verified that the proposed algorithm can extract the pure FECG with reduced computational complexity.

• Journal of Families and Better Life
• /
• v.30 no.5
• /
• pp.29-47
• /
• 2012

The purpose of this research is to identify the everyday life culture, housing satisfaction and housing importance of older Korean-Chinese living in Harbin, China. Social survey research using the questionnaire was conducted from August to October in 2011. A total of 94 usable samples were analyzed by the SPSS version the 18.0 statistical program using frequency, percentage, cross-tabulation, factor analysis, and Pearson's correlation. The major findings were as follows. Firstly, older Chinese in Harbin were assimilated into Chinese culture such as national holidays and respectful people, but acculturated in terms of their daily food, and their preference to live in a Korean-Chinese village. Secondly, they had mainly lived in multi-story houses, the so called Chinese-style apartments. The average size of their living space was $80.33m^2$ and they were usually unsatisfied with their neighbors and floor treatment lacking Ondol(溫突). Thirdly, 5 factors affecting on housing value orientation were 'physical characteristics','emotional characteristics', 'economic characteristics', 'social characteristics', 'neighbor characteristics/reputation of the house' and they explained 73.9%. 2 factors affecting on housing satisfaction were 'inner complex/inner space' and 'neighborhood environment' and they explained 69.4%. In conclusion, some policy is needed for Korean Chinese living in Harbin for their well-being when it comes to their housing needs and conditions. Given the nature of big city, Harbin and its attraction, younger Korean-Chinese tend to be rapidly assimilated into Chinese culture. However older people in Harbin think that it is important for their children to learn both countries' languages and cultures in order to be successful, so some concrete policies and supports are needed.

• Journal of the Korean Ceramic Society
• /
• v.40 no.10
• /
• pp.961-966
• /
• 2003

A Multi-Layer Ceramic (MLC) chip type Band-Pass Filter (BPF) using BiNb$\_$0.975/Sb$\_$0.025/ $O_4$ LTCC (Low Temperature Co-fired Ceramics) and MLC processing is presented. The MLC chip BPF has the benefits of low cost and small size. The BPF consists of coupled stripline resonators and coupling capacitors. The BPF is designed to have an attenuation pole at below the passband for a receiver band of IMT-2000 handset. The computer-aided design technology is applied for analysis of the BPF frequency characteristics. The attenuation pole depends on the coupling between resonators and the coupling capacitance. An equivalent circuit and structure of MLC chip BPF are proposed. The frequency characteristics of the manufactured BPF is well acceptable for IMT-2000 application.

• The Journal of the Korean Institute of Forest Recreation
• /
• v.22 no.4
• /
• pp.23-33
• /
• 2018

The purpose of this research is to develop basic materials useful for the visiting management policies' establishment of national parks by analyzing the characteristics of and satisfaction with the visit to Hallyeohaesang National Park according to travel routes. For this, a total of 671 visitors to Hallyeohaesang National Park were recruited and field surveys were conducted three times in spring, summer, and fall from March to November 2017. The Hallyeohaesang national park's visitors were surveyed using a self-administered questionnaire about visitor characteristics (ex: motivation of visiting, travel routes, travel time, and participating activities, etc.) and satisfaction (ex: satisfaction with the visit, intention to revisit, and intention to recommend). SPSS 21.0 program was used for the statistical analysis: frequency analysis and independent-samples t-test analysis. As a result of analysis the motivation of visiting, those who visited only Hallyeohaesang National Park (a single destination) showed a mean value statistically significantly higher level in health improvement and vacation, relaxation, and healing compared to those who had visited or would visit other places along with Hallyeohaesang National Park (multi-destinations). Single destination visitors spent less time traveling from home to national park than multi-destinations visitors. Those who visited only Hallyeohaesang National Park (as a single destination) showed a mean value statistically higher satisfaction and intention to revisit and recommend. The results of this research have significance in providing basic materials to develop efficient park management policies by studying the characteristics of Hallyeohaesang National Park visitors.