• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.220-223
• /
• 2006

In this paper, we studied about the level controller of optical signal with 40 channels by 4 VOA(Variable Optical Attenuator) with 12 channels. Total 8 microprocessors control 40 chamois for control of optical signal level so that a microprocessor controls 5 channels each. Moreover a microprocessor was added to communicate with outside and transfer instruction to each microprocessor. The output optical signal is measured and VOA is controlled as a result of it. The VOA outputs is inputted into PD(Photo Detector) at once. We could control multi-channel optical signals simply like this.

• Journal of the Optical Society of Korea
• /
• v.11 no.4
• /
• pp.153-157
• /
• 2007

We have proposed an application of disturbance observer with PID controller to minimize gain-transient time of wavelength-division-multiplexing(WDM) multi channels in optical amplifier in channel add/drop networks. We have dramatically reduced the gain-transient time to less than $3{\mu}sec$ by applying a disturbance observer with a proportional/integral/ differential(PID) controller to the control of amplifier gain. The theoretical analysis on the 3-level erbium-doped fiber laser and the disturbance observer technique is demonstrated by performing the simulation with co-simulation of the $MATLAB^{TM}$ and a numerical modeling software package such as the $Optsim^{TM}$.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.1
• /
• pp.10-17
• /
• 1999

The present work presents condensation heat transfer and pressure drop data for the flow of R-12 in flat extruded aluminum tubes with small hydraulic diameters. The tube outside dimensions are $18mm(width){\times}1.7mm(height)$. Three types of internal geometry with the same outside dimensions are tested : sample 1 (7 tube holes), sample 2 (13 tube holes) and sample 3 (7 tube holes, micro-fin). The overall heat transfer coefficient is obtained for air-to-refrigerant heat transfer, and the Wilson plot method is used to determine the heat transfer coefficient for refrigerant flow. The sample 2 and sample 3 show significantly higher performance than sample 1. The heat transfer rates for the sample 2 and sample 3 are 9% and 12% higher, respectively, than sample 1. The friction factors for the sample 2 and sample 3 are 11.9% and 2.4% higher, respectively, than sample 1.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.256-261
• /
• 2008

We developed an authoring tool for designing vibrotactile patterns quickly and easily by using the drag-and-drop paradigm in mobile devices. Designed vibrotactile patterns are registered into a data pool in the XML format, improving the reusability and extensibility of vibrotactile patterns. A multi-channel timeline interface is also incorporated to provide time-synchronized pattern editing for multiple vibration patterns (for multiple vibration actuators). In addition, an internal vibration player is embedded in the authoring tool in order to evaluate the patterns on the spot. A transform function for perceptually transparent vibration rendering can also be set in the editor. Although the authoring tool was developed for mobile devices, it can be used for other applications such as haptic interaction m virtual reality.

• Journal of the Korean Geophysical Society
• /
• v.6 no.1
• /
• pp.31-38
• /
• 2003

Multi-channel seismic survey, which has been mainly employed in oil prospecting, is carried out as a high resolution shallow marine seismic exploration. Fault drop as small as 1 m can be resolved by employing high-resolution seismic survey. Similar to the effect of shallow inhomogenities in the land seismic data, due to occurrence of swell quite often higher than 1 m, shallow marine seismic data tend to be severely degraded. Suppression of such a swell effect is critical in processing of steps of marine seismic shallow high-resolution data. Compared to the moving average depth method, a newly developed method using cross-correlation technique is found out to be very effective in increasing the resolution of the shallow reflection events by accuratly elucidating the depth of sea bottom.

• Journal of Aerospace System Engineering
• /
• v.14 no.5
• /
• pp.33-41
• /
• 2020

The landing gear of an aircraft is a device that absorbs and dissipates shock energy transmitted from the ground to the fuselage. Among the landing gears, the semi-active MR damper landing gear is supposed to show high-shock absorption efficiency under various landing conditions and secure the stability when out of control. In the case of the MR damper landing gear using an annular channel rather than orifice, Amesim, a commercial multi-physics program, is considered as more useful than the conventional two-degree-of-freedom model because the damping force generated by the pressure drop through the flow annular path can cause cavitation in the low-pressure chamber of the MR damper with a specific internal structure. In this paper, the main dynamic characteristics of the MR damper landing gear with an annular type flow path structure has been analyzed under the condition of cavitation. Based on the analysis results using Amesim, a design guideline for the MR damper flow path that prevents cavitation has been proposed based on the modification of the arrangement of internal components of the damper. The guideline was verified through a drop simulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.546-551
• /
• 2020

Generally, surface vessels have many compartments for operation and living quarters, and each compartment is an important space for the ship's survivability. During ship construction, a compartment leak test is necessary and is carried out on each vessel. However, the current test method is in doubt when looking at the actual test results. The reason is that only one pressure gauge is used for the measurement to check the air, so an uncomprehended phenomenon is detected during group compartment leak tests. From this point of view, an improved test device and method are needed. In this study, a multi-channel data acquisition device with multiple pressure sensors is proposed to detect each compartment's pressure variation or pressure drop. This test is a more confidential compartment leak test than the current method, and the test device can show real-time pressure detection values of each of the pressure sensors, which are installed in each compartment, including unmanned space.

• The Journal of Industrial Distribution & Business
• /
• v.1 no.1
• /
• pp.5-12
• /
• 2010

The retail business of drugstore was introduced to Korea for the first time 10 years ago. Since Olive Young introduced a retail store in the name of drugstore in 1999 for the first time in Korea, new distribution channel combining drugstore, cosmetic products and dairy products, etc has been made. At initial stage, the new distribution channel grew up slowly because of low specialty and economic stagnation. However, the three big distribution channels, that is to say, Olive Young (CJ), Watsons (GS) and W Store (Kolon Well Care), etc, were established to produce new distribution system following large-scaled discount stores as well as convenience stores. The purpose of the study is to investigate ways making Korean style drugstore be new retail business in addition to traditional markets, department stores, E-Mart and other general super markets and to examine problems preventing the drugstore from being promoted and to find out solutions. The speciality retailers that is called a category killer attacking department stores as well as marts is expanding market quickly. New consumption trend that gives priority to wellbeing is being expanded in accordance with high level of standards of living life: The drugstore is thought to be new alternative of distribution because it keeps special products. Young ladies who are main customers of drugstores respond to the trend sensitively to have more buying power that is thought to be promising. And, consumers' desire has become concrete and special. This is because consumers want not only convenient shopping but also special shopping system that is current trend. These days, so called Multi-shop and Total shop and other special shops have been recently opened. Special multi-shop has been concentrated on fashion product and miscellaneous goods so far: Health total wellbeing shop shall be popular in accordance with wellbeing trends. Drugstores can play an important role. Drugstores were opened for the first time ten years ago. In particular, Olive Young succeeded in going into the black after making efforts for a long time by many persons. Drugstores could succeed in the business owing to many persons in the past as well as customers who liked drugstores. However, drugstores once lost ways and recorded poor business results. The three drugstores, that is to say, Olive Young, Watsons making efforts to go into the black and W-Store pursuing traditional drugstore shall compete each other and make effort to satisfy customers' desire. In that way, the three drugstores can be assured of present business as well as future business. The consumers' demand trend has become special at sub-division so that drugstores that can satisfy the demand can succeed in the business. Large businesses may be more interested in the 4th generation retail business to produce good income and to have bright future. Drugstore business and market are likely to expand and develop owing to large business' participation in drugstore business. Drugstores expanded shop at Seoul and Gyeonggi-do until middle of 2000. Drugstore business at station sphere in Seoul and Gyeonggi-do that have high ratio of temporary population has low customer loyalty to have limitation on continuous growth. Since 2009, drugstores have opened new shops at local towns: From the year of 2010, drugstores need to establish multiple shop strategy by accelerating business speed and to allow customers to drop in the shop anywhere in the nation and to enter consumers' life deeply, so that they can strengthen business base definitely. Drugstores need to have price competitiveness to have multiple shop opening strategy and to satisfy consumers and to supply high quality services that is future subject to solve. And, Olive Young and Watsons that are Korean style drugstore need to keep system in order and to strengthen substance as Korean style drugstore and to expand marketing, so that they can get business outcome within 5 years that was done 10 years before and they become the 4th generation retail business. The study had difficulties at collecting material from the three drugstore because of poor cooperation. And, the author had great difficulty at collecting statistical material that was made in disorder. Further effort is needed considering such problems.

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.433-437
• /
• 2013

Electrical discharge plasma created in a multi-channel porous ceramic membrane-supported catalyst was applied to the decomposition of a volatile organic compound (VOC). For the purpose of improving the oxidation capability, the ceramic membrane used as a low-pressure drop catalyst support was loaded with zinc oxide photocatalyst by the incipient wetness impregnation method. Alternating current-driven discharge plasma was created inside the porous ceramic membrane to produce reactive species such as radicals, ozone, ions and excited molecules available for the decomposition of VOC. As the voltage supplied to the reactor increased, the plasma discharge gradually propagated in the radial direction, creating an uniform plasma in the entire ceramic membrane above a certain voltage. Ethylene was used as a model VOC. The ethylene decomposition efficiency was examined with experimental variables such as the specific energy density, inlet ethylene concentration and zinc oxide loading. When compared at the identical energy density, the decomposition efficiency obtained with the zinc oxide-loaded ceramic membrane was substantially higher than that of the bare membrane case. Both nitrogen and oxygen played an important role in initiating the decomposition of ethylene. The rate of the decomposition is governed by the quantity of reactive species generated by the plasma, and a strong dependence of the decomposition efficiency on the initial concentration was observed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.12
• /
• pp.1102-1139
• /
• 2002

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2000 and 2001 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation of facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat, humidity was also interesting for comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing topics. Well developed CFD technologies were widely applied for developing facilities and their systems. (2) Most of papers related with heat transfer analysis and heat exchanger shows dealt with convection, evaporation, and channel flow for the design application of heat exchanger. The numerical heat transfer simulation studies have been peformed and reported to show heat transfer characteristics. Experimental as well as numerical studies on heat exchanger were reported, while not many papers are available for the system analysis including heat exchanger. (3) A review of the recent studies on heat pump system shows that performance analysis and control of heat pump have been peformed by various simulations and experiments. The research papers on multi-type heat pump system increased significantly. The studies on heat pipe have been examined experimently for change of working characteristics and strut lure. Research on the phase change has been carried out steadily and operation strategies of encapsulated ice storage tank are reported experimentally in several papers. (4) A review of recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. Evaporation and condensation heat transfer characteristics are investigated for tube shapes and new alternative refrigerants. Studies on components of refrigeration/air conditioning system are carried to examine efficiency for various compressors and performance of new expansion devices. In addition to thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out, however research works on two-phase flow seemed to be insufficient. (5) A review of the recent studies on absorption cooling system indicates that heat and mass transfer phenomena have been investigated to improve absorber performance. Various experimental data have been presented and several simulation models have been proposed. A review of the recent studies on duct and ventilation shows that ventilation indices have been proposed to quantify the ventilation performance in buildings and tunnels. Main efforts have been focused on the applications of ventilation effectiveness in practice, either numerically using computational fluid dynamics or experimentally using tracer gas techniques. (6) Based on a review of recent studies on indoor thermal environment and building service systems, research issues have mainly focused on many innovative ideas such as underfloor air-conditioning system, personal environmental modules, radiant floor cooling and etc. Also, the new approaches for minimizing energy consumption as well as improving indoor environmental conditions through predictive control of HVAC systems, various activities of building energy management and cost-benefit analysis for economic evaluation were highlighted.