• 한국통신학회논문지
• /
• 제34권2B호
• /
• pp.170-177
• /
• 2009

본 논문에서는 본 논문에서는 BS(Base Station, 기지국)와 RS(Relay Station, 중계기)가 지향성 안테나를 갖는 multi-tier 기반의 NBTC (Narrow-Beam Trisector Cell)와 WBTC (Wide-Beam Trisector Cell) 구조를 제안하고, 두 시스템에서 동일 채널 간섭 (Co-channel interference)에 의한 용량을 두 개의 채널 모델을 적용하여 분석하였다. 분석을 통해 $2^{nd}$ tier로 구성한 한 클러스터에서 발생하는 총 용량은 LOS(Line of Sight)의 존재 여부에 따라 NBTC 구조 셀과 WBTC 구조 셀의 총 용량이 달라짐을 알 수 있었다. 본 논문의 결과는 향후 차세대 이동통신 및 와이브로 시스템에서 간섭을 고려한 멀티 홉 RS 도입 시에 참고할 만한 가이드라인을 제시할 수 있을 것이다.

• 한국도로학회논문집
• /
• 제12권4호
• /
• pp.11-16
• /
• 2010

보행교통류를 주제로 다양한 연구들이 진행되었지만 초기의 보행연구는 차량의 교통류이론을 그대로 적용하여 해석하기도 하였다. 최근 보행교통류에 대한 다양한 모형들이 제시되고 있으며, 특히 CA모형은 보행교통류를 위한 시뮬레이션 모형으로 빈번하게 사용되고 있다. 대표적인 CA 모형으로 가스입자의 움직임을 이용하여 양방향의 보행교통류를 설명하기도 하였는데 초기에는 정방형의 Gas-lattice 모형이 제안되었으며 이후에 정육방 Gas-lattice 모형을 이용하여 보행자의 움직임과 회피를 묘사하기도 하였다. 하지만 이러한 모형들은 보행자의 움직임을 편의임의보행으로 가정하였기 때문에 단일방향으로의 움직임만을 설명할 수 있었다. 본 연구에서 제시된 MLPM(the Multi-Layer Pedestrian Model)은 어떤 공간에서 복수개의 기종점을 가진 경우에도 현실적인 보행자의 움직임을 설명할 수 있는 모형이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.462-466
• /
• 1997

Proportional directional control valves (PDCVl adjust the amount of flow as well as flow direction in response to an electrical signal. This valves includes direct operated valves with or without spool position feedback. This paper investigates if it is possible to control pressure of fluids by means of the PDCV. A pressure signal is feed back to the Proportional-Integral (PI) controller, which is based upon a personal computer (PC). The PI control algorithm is implemented in a graphical programming language of LabVIEW. The results of experiments show the PDCV can be used a multi function valve of pressure control as well as direction control.

• 대한조선학회논문집
• /
• 제45권1호
• /
• pp.10-17
• /
• 2008

In this paper an accurate and stable gridless method that can be applied to multi-dimensional convection problems is developed on a flow directional local grid. A two dimensional pure convection problem is calculated and more accurate and stable solution is obtained compared with other schemes in grid method. The tested numerical schemes include 1st-order upwind scheme, 2nd-order Leith scheme, 3rd-order MUSCL, and QUICK scheme. It is seen that more accurate results are expected when the schemes combined with a MMT control limiter.

• 한국광학회지
• /
• 제16권2호
• /
• pp.162-167
• /
• 2005

나노 크기 양자우물구조로 구성된 광통신용 방향성결합기를 모드전송선천 이론을 이용하여 설계하였다. 그 타당성과 유용성을 보이기 위하여 나노 결합기의 그 전파특성과 결합특성을 서로 다른 유효질량으로 구성된 이중 양자우물구조에서 분석하였다. 그 수치해석 결과 전체 전자에너지가 83.9 meV일 때, 결합길이 295.3 nm에서 최대 결합효율을 나타내었다. 더욱이, 이중 양자우물구조 사이의 장벽(barrier) 두께가 증가함에 따라 협대역(narrowband) 필터로 동작하였다.

• 한국자동차공학회논문집
• /
• 제1권2호
• /
• pp.49-59
• /
• 1993

A new signal processing technique is applied to four-cylinder spark and compression ignition engines for the diagnosis of power faults inside the cylinders. This technique utilizes two-sided directional power spectra(예S) of complex vibration signals measured from engine blocks as the patterns for engine cylinder power faults. The dPSs feature that they give not only the frequency contents but also the directivity of the engine block motion. For the automatic detection/diagnosis of cylinder power faults, pattern recognition method using multi-layer neural networks is employed. Experimental results show that the sucess rate for diagnosis of cylinder power faults using dPSs is higher than that using the conventional one-sided power spectra. The proposed technique is also tested to check the robustness to the sensor position and the engine rotational speed.

• Journal of Power Electronics
• /
• 제13권4호
• /
• pp.569-583
• /
• 2013

In this study, the simultaneous use of a multi-level converter (MLC) as a DC-motor drive and as an active battery cell balancer is investigated. MLCs allow each battery cell in a battery pack to be independently switched on and off, thereby enabling the potential non-uniform use of battery cells. By exploiting this property and the brake regeneration phases in the drive cycle, MLCs can balance both the state of charge (SoC) and temperature differences between cells, which are two known causes of battery wear, even without reciprocating the coolant flow inside the pack. The optimal control policy (OP) that considers both battery pack temperature and SoC dynamics is studied in detail based on the assumption that information on the state of each cell, the schedule of reciprocating air flow and the future driving profile are perfectly known. Results show that OP provides significant reductions in temperature and in SoC deviations compared with the uniform use of all cells even with uni-directional coolant flow. Thus, reciprocating coolant flow is a redundant function for a MLC-based cell balancer. A specific contribution of this paper is the derivation of a state-space electro-thermal model of a battery submodule for both uni-directional and reciprocating coolant flows under the switching action of MLC, resulting in OP being derived by the solution of a convex optimization problem.

• Journal of Communications and Networks
• /
• 제15권4호
• /
• pp.370-382
• /
• 2013

Distributed massive MIMO systems, which have high bandwidth efficiency and can accommodate a tremendous amount of traffic using algorithms such as zero-forcing beam forming (ZFBF), may be deployed in large public venues with the antennas mounted under-floor. In this case the channel gain matrix H can be modeled as a multi-banded matrix, in which off-diagonal entries decay both exponentially due to heavy human penetration loss and polynomially due to free space propagation loss. To enable practical implementation of such systems, we present a multi-banded matrix inversion algorithm that substantially reduces the complexity of ZFBF by keeping the most significant entries in H and the precoding matrix W. We introduce a parameter p to control the sparsity of H and W and thus achieve the tradeoff between the computational complexity and the system throughput. The proposed algorithm includes dense and sparse precoding versions, providing quadratic and linear complexity, respectively, relative to the number of antennas. We present analysis and numerical evaluations to show that the signal-to-interference ratio (SIR) increases linearly with p in dense precoding. In sparse precoding, we demonstrate the necessity of using directional antennas by both analysis and simulations. When the directional antenna gain increases, the resulting SIR increment in sparse precoding increases linearly with p, while the SIR of dense precoding is much less sensitive to changes in p.

• 해양환경안전학회지
• /
• 제18권2호
• /
• pp.153-159
• /
• 2012

본 연구에서는 실습선의 다방향 불규칙파중 종방향 운동응답특성을 선형 스트립이론에 기초한 상용코드(MAXSURF v.16)를 이용하여 해석하였다. 해석에 앞서 상용코드의 검증을 위해 파나막스급 컨테이너선에 대해 실험조건과 동일한 선형과 해석조건을 적용하여 계산한 결과와 기 계산된 결과(Flokstra, 1974)가 상호 유사한 경향을 얻어 해석의 신뢰성을 확보하였다. 계산조건으로는 Fn=0.257에서 파랑외력을 ITTC 파스펙트럼에 기초한 뷰포트 스케일 5($\bar{T}=5.46$, $H_{1/3}=2m$)의 파스펙트럼을 산출하였고, 조우각은 선수사파(Head & bow seas, $150^{\circ}$)를 적용하여 상하동요(Heave)와 종동요(Pitch)의 선체운동응답스펙트럼을 해석하였다. 다방향 불규칙파에 대한 운동응답스펙트럼은 선수사파에서 상하동요의 경우는 미소하게 단파정파에서 높은 스펙트럼 분포를 보이고 종동요의 경우는 장파정파에서 높게 나타났다.

• 조명전기설비학회논문지
• /
• 제28권10호
• /
• pp.16-26
• /
• 2014

This paper proposes new 13-level inverter topology and DC/DC converter buck-boost structure topology for multilevel, compounding uni-directional and bi-directional switches, and proposes high-efficient multilevel inverter system in which the proposed two PCS(Power Conditioning System) was connected in series. In proposed multilevel inverter of forming a output 13-level phase voltage by using total 18 switching parts, Then bi-directional switch has a characteristic of reducing conduction loss and controlling the reactive power effectively by separating electrically from the neutral point. DC/DC converter for supplying in dependent 3 DC voltage to the proposed multi-level inverter generates 180-degree phase shifted PWM by the symmetrically combined structure of 2 buck-boost converter and twice switching frequency efficiency can be obtained, meanwhile, the converter can step up/down the output voltage and 20% output can be generated comparing the input voltage. This proposed system is verified with the simulation and laboratory test.