• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.2
• /
• pp.207-222
• /
• 2018

In this study, light absorption of carbonaceous species in $PM_{2.5}$ was investigated using a dual-spot 7-wavelength Aethalometer(model AE33) with 1-min time interval between January 01 and September 30, 2017 at an urban site of Gwangju. During the study period, two Asian dust (AD) events occurred in April (AD I) and May (AD II), respectively, during which light absorption in total suspended particles was observed. Black carbon (BC) was the dominant light absorbing aerosol component at all wavelengths over the study period. Light absorption coefficients by aerosol particles were found to have 2.7~3.3 times higher at 370 nm than at 880 nm. This would be attributed to light absorbing organic aerosols, which is called brown carbon (BrC), as well as BC as absorbing agents of aerosol particles. Monthly average absorption ${{\AA}}ngstr{\ddot{o}}m$ exponent ($AAE_{370-950nm}$) calculated over wavelength range of 370~950 nm ranged from 1.10 to 1.35, which was lower than the $AAE_{370-520nm}$ values ranging from 1.19~1.68 that was enhanced due to the presence of BrC. The estimated $AAE_{370-660nm}$ of BrC ranged from 2.2 to 7.5 with an average of 4.22, which was fairly consistent to the values reported by previous studies. The BrC absorption at 370 nm contributed 10.4~28.4% to the total aerosol absorption, with higher contribution in winter and spring and lower in summer. Average $PM_{10}$ and $PM_{2.5}$ concentrations were $108{\pm}36$ and $24{\pm}14{\mu}g/m^3$ during AD I, respectively, and $164{\pm}66$ and $43{\pm}26{\mu}g/m^3$ during AD II, respectively, implying the greater contribution of local pollution and/or regional pollution to $PM_{2.5}$ during the AD II. BC concentration and aerosol light absorption at 370 nm were relatively high in AD II, compared to those in AD I. Strong spectral dependence of aerosol light absorption was clearly found during the two AD events. $AAE_{370-660nm}$ of both light absorbing organic aerosols and dust particles during the AD I and II was $4.8{\pm}0.5$ and $6.2{\pm}0.7$, respectively. Higher AAE value during the AD II could be attributed to mixed enhanced urban pollution and dust aerosols. Absorption contribution by the light absorbing organic and dust aerosols estimated at 370 nm to the total light absorption was approximately 19% before and after the AD events, but it increased to 32.9~35.0% during the AD events. In conclusion, results from this study support enhancement of the aerosol light absorption due to Asian dust particles observed at the site.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.635-639
• /
• 2016

In the devices used in the microwave frequency band, the gain decreases as the frequency increases due to the parasitic component. To compensate for these characteristics, a linear gain equalizer with an opposite slope is needed in wideband systems, such as those used for electronic warfare. In this study, a linear gain equalizer that can be used in the 18 ~ 40GHz band is designed and fabricated. Circuit design and momentum design (optimizations) were carried out to reduce the errors between design and manufacturing. A thin film process is used to minimize the parasitic components within the implementation frequency band. A sheet resistance of 100 ohm/square was employed to minimize the wavelength variation due to the length of the thin film resistor. This linear gain equalizer is a structure that combines a quarter wavelength-resonator on a series microstrip line with a resistor. All three 1/4 wavelength short resonators were used. The fabricated linear gain equalizer has a loss of more than -5dB at 40GHz and a 6dB slope in the 18 ~ 40GHz band. By using the manufactured gain equalizer in a multi-stage connected device such as an electronic warfare receiver, the gain flatness degradation with increasing frequency can be reduced.

• Korean Journal of Cognitive Science
• /
• v.21 no.1
• /
• pp.157-175
• /
• 2010

Understanding dialogue participant's emotion is important as well as decoding the explicit message in human communication. It is well known that non-verbal elements are more suitable for conveying speaker's emotions than verbal elements. Written texts, however, contain a variety of linguistic units that express emotions. This study aims at analyzing components for constructing an emotion ontology, that provides us with numerous applications in Human Language Technology. A majority of the previous work in text-based emotion processing focused on the classification of emotions, the construction of a dictionary describing emotion, and the retrieval of those lexica in texts through keyword spotting and/or syntactic parsing techniques. The retrieved or computed emotions based on that process did not show good results in terms of accuracy. Thus, more sophisticate components analysis is proposed and the linguistic factors are introduced in this study. (1) 5 linguistic types of emotion expressions are differentiated in terms of target (verbal/non-verbal) and the method (expressive/descriptive/iconic). The correlations among them as well as their correlation with the non-verbal expressive type are also determined. This characteristic is expected to guarantees more adaptability to our ontology in multi-modal environments. (2) As emotion-related components, this study proposes 24 emotion types, the 5-scale intensity (-2~+2), and the 3-scale polarity (positive/negative/neutral) which can describe a variety of emotions in more detail and in standardized way. (3) We introduce verbal expression-related components, such as 'experiencer', 'description target', 'description method' and 'linguistic features', which can classify and tag appropriately verbal expressions of emotions. (4) Adopting the linguistic tag sets proposed by ISO and TEI and providing the mapping table between our classification of emotions and Plutchik's, our ontology can be easily employed for multilingual processing.

• Food Science and Preservation
• /
• v.16 no.3
• /
• pp.385-391
• /
• 2009

Analytical electron spin resonance (ESR) parameters were investigated in irradiated seasonings after exposure to different radiation sources. Two commercial seasonings (SS-1 and SS-2) were irradiated with 0.20 kGy under ambient conditions using a $^{60}Co$ gamma-ray irradiator or an electron beam accelerator. Crystalline sugar-induced multi-component signals with g-values of 2.031, 2.021, 2.017, 2.009, 2.002, 1.990, and 1.980 were observed in both irradiated samples, whereas singlet signals were detected in non-irradiated materials, thereby distinguishing irradiated from control samples. Under the same analytical conditions, the ESR signal intensity of electron beam-irradiated samples was greater than that of gamma-irradiated materials. Determination coefficients (R2 values) between irradiation doses and corresponding ESR responses were 0.9916-0.9973 for all samples, and the magnetic field of specified g-values for irradiated samples remained constant. The predominant ESR signals of g2 (2.021), g4 (2.009), g5 (2.002), and g6 (1.990) showed high correlations with the corresponding irradiation doses (R2=0.8243 - 0.9929).

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.1
• /
• pp.9-26
• /
• 2005

In the pursuit of ever higher levels of performance, recent computer systems have made use of deep pipeline, dynamic scheduling and multi-issue superscalar processor technologies. In this situations, branch prediction schemes are an essential part of modem microarchitectures because the penalty for a branch misprediction increases as pipelines deepen and the number of instructions issued per cycle increases. In this paper, we propose a novel branch prediction scheme, direction-gshare(d-gshare), to improve the prediction accuracy. At first, we model a neural network with the components that possibly affect the branch prediction accuracy, and analyze the variation of their weights based on the neural network information. Then, we newly add the component that has a high weight value to an original gshare scheme. We simulate our branch prediction scheme using Simple Scalar, a powerful event-driven simulator, and analyze the simulation results. Our results show that, compared to bimodal, two-level adaptive and gshare predictor, direction-gshare predictor(d-gshare. 3) outperforms, without additional hardware costs, by up to 4.1% and 1.5% in average for the default mont of embedded direction, and 11.8% in maximum and 3.7% in average for the optimal one.

• Journal of the Korea Concrete Institute
• /
• v.19 no.3
• /
• pp.359-366
• /
• 2007

Recently, analysis researches on durability are focused on chloride attack and carbonation due to increased social and engineering significance. Generally, chloride penetration and carbonation occur simultaneously except for in submerged condition and chloride behavior in carbonated concrete is evaluated to be different from that in normal concrete. Furthermore, if unavoidable crack occurs in concrete, it influences not only single attack but also coupled deterioration more severely. This is a study on analysis technique with system dynamics for chloride penetration in concrete structures exposed to coupled chloride attack and carbonation through chloride diffusion, permeation, and carbonation reaction. For the purpose, a modeling for chloride behavior considering diffusion and permeation is performed through previous models for early-aged concrete such as MCHHM (multi component hydration heat model) and MPSFM (micro pore structure formation). Then model for combined deterioration is developed considering changed characteristics such as pore distribution, saturation and dissociation of bound chloride content under carbonation. The developed model is verified through comparison with previous experimental data. Additionally, simulation for combined deterioration in cracked concrete is carried out through utilizing previously developed models for chloride penetration and carbonation in cracked concrete. From the simulated results, CCTZ (chloride-carbonation transition zone) for evaluating combined deterioration is proposed. It is numerically verified that concrete with slag has better resistance to combined deterioration than concrete with OPC in sound and cracked concrete.

• 대한공업교육학회지
• /
• v.34 no.1
• /
• pp.196-209
• /
• 2009

The purpose of this study was to analyze engineering basic competencies about the time completed a course and educational needs of engineering college graduates. Survey method using questionnaire was the major research method of this study. A survey of 807 engineering college graduates was carried out. Questionnaire were made of the level of engineering basic competencies of engineering college graduates, its priorities of actual vocation and level of engineering basic competencies of major. Major results of the study, some recommendations for future researches were made as follows: The level of engineering basic competencies of engineering college graduates was 3.3 average(5 full marks). Engineering basic competencies that educational needs were high respectively, were an ability to communicate effectively, an ability to design a system, component, or process to meet desired needs, an ability to function on multi-disciplinary teams, an ability to understand global culture and cooperate internationally, an ability to design and conduct experiment as well as to analyze and interpret data, and an ability to engage in life-long learning.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.5
• /
• pp.203-220
• /
• 2020

The purpose of this study is to examine the importance of entrepreneurs' well-being, and to propose several ways to improve it. First, the factors influencing entrepreneurs' well-being were explored via previous literature review, and positive psychological capital based on positive psychology was selected as the main factor. In addition, the hypotheses were formulated and the research model was constructed by selecting authentic leadership, mastery goal orientation, and social support as the antecedents predictably associated with positive psychological capital. To empirically analyze the proposed model, a questionnaire survey was conducted for the entrepreneurs who fulfilled the training/coaching/consulting programs offered by the Youth Startup Academy. By using the collected 133 responses, PLS-Structural Equation Analysis, PLS-Multi Group Analysis(MGA), and PLS-Importance-Performance Map Analysis(IPMA) were performed. As a result, it was found that positive psychological capital had a high causal relationship with the well-being of entrepreneurs; and authentic leadership and mastery goal orientation had a positive effect on positive psychological capital. However, the statistical significance of the impact of social support has not been verified. While differences in causality between early and growing stages of start-ups only acted as sub-factors of positive psychological capital, the aforementioned three antecedents showed a significant difference for hope and optimism, respectively. This study expanded the topic of entrepreneurship-related research, which mostly focuses on identifying the performance factors of start-ups. It is meaningful in that it empirically verified the causality model constructed by exploring the factors with respect to the mental well-being of entrepreneurs, which is a main theme in the entrepreneurship-related research. These results found in the current study will render practical insights to entrepreneurs, researchers, and educators.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.503-510
• /
• 2006

Readout circuit is to convert signal occurred in a defector into suitable signal for image signal processing. In general, it has to possess functions of impedance matching with perception element, amplification, noise reduction and cell selection. It also should satisfies conditions of low-power, low-noise, linearity, uniformity, dynamic range, excellent frequency-response characteristic, and so on. The technical issues in developing image processing equipment for focal plane way (FPA) can be categorized as follow: First, ultraviolet (UV) my detector material and fine processing technology. Second, ReadOut IC (ROIC) design technology to process electric signal from detector. Last, package technology for hybrid bonding between detector and ROIC. ROIC enables intelligence and multi-function of image equipment. It is a core component for high value added commercialization ultimately. Especially, in development of high-resolution image equipment ROIC, it is necessary that high-integrated and low-power circuit design technology satisfied with design specifications such as detector characteristic, signal dynamic range, readout rate, noise characteristic, ceil pitch, power consumption and so on. In this paper, we implemented a $8\times8$ FPA prototype ROIC for reduction of period and cost. We tested unit block and overall functions of designed $8\times8$ FPA ROIC. Also, we manufactured ROIC control and image boards, and then were able to verify operation of ROIC by confirming detected image from PC's monitor through UART(Universal Asynchronous Receiver Transmitter) communication.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.4 s.50
• /
• pp.347-353
• /
• 2006

The atomic-nano scale structures of multi-component aluminosilicate glasses have not been well understood in spite of its implications fur dynamics and generation of magma in the natural system due to lack of suitable spectroscopic and scattering experiments. Here, we report O-17 MAS and isotropic projection of 3QMAS NMR spectra for quaternary Na-Ca silicate glasses $[(CaO)_x(Na_2O)_{1-x}]\;(A1_2O_3)_{0.5}(SiO_2)_6,\;CNAS)$ at 14.1 Tesla where atomic configurations around bridging oxygen (Si-O-Si, Si-O-Al) and non bridging oxygen (Na-O-Si, Ca-O-Si, (Na, Ca)-O-Si) are partially resolved. With increasing Na content, the fraction of Na-O-Si increases while those for bridging oxygens remain constant. The Na/Ca ratio apparently affects the peak widths of bridging oxygen peaks (e.g., Si-O-Si)) and thus the topological entropy as well as chemical shifts of the bridging oxygen peaks, implying that both BOs and NBOs are strongly interacting with network modifying cations The effect of cation field strength on the degree of Al-avoidance was also discussed.