• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.759-764
• /
• 2005

In this paper, numerical analysis of hydrogen recycle system has been conducted in order to enhance the efficiency of automotive fuel cell. Generally, the excess hydrogen is provided in the automotive fuel cell. Since the non-reaction hydrogen reduces automotive fuel cell efficiency, reuse of the non-reaction hydrogen can be helpful to improve the fuel cell performance. In case of PEM FC, the water vapor is provided to hydrogen from the cathode so that the mixture experiences phase change depending on the changes of pressure and temperature. The internal flow of the mixture in the hydrogen recirculation system of fuel cell was investigated for real flow conditions. The variation of performance, properties and mass fractions of mixture, hydrogen and water-vapor were investigated. This study was performed based on 80KW level automotive fuel cell's recycling system.

• Journal of Korean Institute of Industrial Engineers
• /
• v.33 no.1
• /
• pp.126-137
• /
• 2007

This study addresses the analytic models for estimating the capacity and performance of the multi-carrierCDMA system where several carriers would be assigned to a single cell to accommodate the required trafficdemand. Two key features of the multi-carrier CDMA system, carrier selections of new calls and inter-camerhard handoffs, are accommodated in the models, Computation experiments are conducted to show the effectiveness of the proposed model.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.313-316
• /
• 2005

본 논문은 대용량 진력변환장치인 멀티-레벨 인버터 시스템에서 출력 전압가변이 손쉬운 HBML(H-Bridge Multi-Level) 인버터의 Master와 Cell 제어기 구성에 관한 것이다. HBML 인버터는 각각의 단위 Cell을 저압에서 사용하는 인버터로 구성하면, 구조적으로 풀-브릿지(Full-Bridge) 인버터를 캐스케이드 방식으로 연결하여 고압출력을 얻을 수 있는 토폴로지이다. 시스템에서 Master와 Cell의 제어 처리를 한곳에 집중하지 않는 분산 제어 방식을 적용하여 통신 Data를 최적화하도록 구성하고, 이를 바탕으로 두 제어기를 고성능 원-칩(One-Chip) DSP로만 설계하였다. 모든 외부 모듈을 내장한 CPU로 제어기가 구성될 경우, 외부 노이즈에 강하며, 추가되는 하드웨어 결선을 최소화할 수 있다. 본 논문에서는 HBML 인버터 출력 생성 시 반드시 요구되는 출력 PWM 동기 및 위상전이(Phase Shift)를 각 제어기 자체에 내장된 모듈만을 이용해서 구현하였다.

• Journal of Power System Engineering
• /
• v.4 no.4
• /
• pp.92-98
• /
• 2000

Modern manufacturing systems should cope with the frequent changes in a product model and disturbances in manufacturing process. The control system of such systems must cover a constant adaptation and high flexibility. Holonic Flexible Manufacturing Cell(HFMC) is introduced to handle these issues more successfully. It is based on the concept of autonomous co-operating agent, called 'Holon', which is a building block of a manufacturing system for transforming, transporting, storing and/or validating information and physical objects. In this paper the basic structure of the HFMC is represented by using Unified Modeling Language and Open architecture cell controller is developed for effective integration components of a manufacturing system. Also a new control model, called MuLOM(Multi-Layered Operation Model), is suggested to represent the control behaviour for a holonic flexible manufacturing cell control system.

• Journal of Plant Biology
• /
• v.32 no.4
• /
• pp.313-322
• /
• 1989

A system was established for induction of multi-shoots and plant regeneration from mesophyll protoplasts of alfalfa, Medicago sativa L. cv. Vernal. Different hormonal effects were tested at each step of protoplast culture, i.e. cell division in modified Kao's liquid medium (K566-7). calli formation on SH semi solid medium, and multi-shoot regeneration from calli on SHa and SHb solid media. Frequency of multi-shoots and plant regeneration was affected by various combinations of phytohormones in final step. The evaluation of multi-shoots induction systems via protoplast culture was discused.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.9 s.174
• /
• pp.49-59
• /
• 2005

This paper describes a development of the extrusion process and estimation of the weldability for multi cell tubes used to cooling system of automobiles. A study on extrusion process is performed through the 3D FE simulation in non-steady state and extrusion experimentation. Also, nano-indentation test is employed to estimate the weldability of tubes. Especially, An evaluation of the weldability using the nano-indentation is accomplished as compared with nano-hardness in welded part and in the others. Finally, the pattern of the mandrel defection is investigated according to shapes of the porthole and/or chamber.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.27-30
• /
• 2004

OFDMA is considered as one of the major candidates for broadband wireless access. The OFDMA signal is usually coherently demodulated, requiring the channel estimation which can be estimated using a known pilot signal. In multi-cell environment, the performance of channel estimation is mainly limited by intercell interference. It is desirable to use a pilot signal that can estimate the channel information robust to the intercell interference in the OFDMA uplink system. In this paper, we consider two types of pilot signal applicable to multi-cell OFDMA uplink systems: One is time-multiplexed pilot signal and the other is code­multiplexed pilot signal. Simulation results show that the code-multiplexed pilot is suitable for low mobility environment and time-multiplexed pilot is suitable for high mobility environment.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.294-295
• /
• 2003

삶의 질이 높아감에 따라 환경에 대한 사람들의 관심이 늘어가고 있다. 그중 미소량으로도 인체에 치명적인 해를 주는 유기인 화합물에 대한 실시간 모니터링 기술이 요구되고 있다. 이를 검출할 수 있는 센서로서 광학식 센서는 기존의 센서(반도체식, 전기화학식 등)에 비하여 선택성과 반응전후의 복귀성 및 온·습도의 영향 등의 문제를 개선할 수 있다. 기존의 광학식 센서는 원적외선 영역을 이용하는데 이는 광학식 센서의 경우 높은 감도를 보이나 이들 시스템은 냉각장치를 요구하며 장비의 가격이 고가인 단점이 있다. (중략)

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.6
• /
• pp.21-27
• /
• 2009

As portable electronic systems being used more often, it becomes a more important issue to lengthen the lifetime of the power battery of the system, for instance, by developing batteries of a higher efficiency. A simple as well as practical method to lengthen the lifetime is to use multiple batteries that are connected in parallel. But in this paper we present a new idea in using multiple batteries, with which the residual energy of the battery can be used in the sense of recycling. The idea is based on a usual phenomenon that a battery cell that has been used until its voltage has dropped below a reference level may still have some residual energy, due to which the voltage can recover when the cell takes a rest for a while. As a practical realization scheme of this idea, a multi-cell configuration method with a cell selection switch is introduced, and its feasibility has been examined by performing experimental observations on the behavior of battery discharge. It has been found that the lifetime of an Alkaline primary battery cell can be lengthened approximately by one or two hours with the proposed method.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.10a
• /
• pp.3-6
• /
• 2004

In order to reduce the excessive numerical dissipation which is induced when a grid system is not aligned with a discontinuity, a new spatial treatment of cell-interface fluxes is introduced. The M-AUSMPW+ in this paper has the formula that has an additional procedure of re-defining transferred properties at a cell-interface, based on AUSMPW+. The newly defined transferred property could eliminate numerical dissipation effectively in non-flow aligned grid system of multi-dimensional flows.