• The Journal of the Korea Contents Association
• /
• v.6 no.4
• /
• pp.55-62
• /
• 2006

Important issues emerging with the opening of the ubiquitous age are how to present ubiquitous environment and how services and access methods can be provided to users. The present research proposes a system that can provide users with useful information dynamically through intelligent multi agents in mobile environment. The system is composed of profile module, rule generation module, filtering module and service module. It was designed to find users' demands in an intelligent way based on information on users registered through the recommendation agent. We implemented an applied system and proved its performance through an experiment.

• Journal of Communications and Networks
• /
• v.8 no.1
• /
• pp.106-115
• /
• 2006

The current trend toward the utilization of the Internet as a common means for the offer of heterogeneous services imposes to address the issues related to end-to-end service assurance in the inter-domain scenario. In this paper, we first present an architecture for service management in networks based on service level specifications (SLS). The architecture is designed to be independent both of the specific network technology adopted and of the high level service semantics. Then, we focus on a specific functionality of the proposed architecture: Resource allocation in the multi-domain scenario. A distributed admission control algorithm is introduced, its complexity is evaluated and a comparison with related solutions is provided.

• International journal of advanced smart convergence
• /
• v.9 no.3
• /
• pp.78-84
• /
• 2020

Due to social distancing caused by COVID 19, music concerts have not been allowed at home and abroad, and it is not known when overseas concerts will be able to resume unless the pandemics calm down, even if they are available. Meanwhile, people consume much more content through online services such as Netflix and YouTube than before. Under these circumstances, the music industry expects the virtual livestreamed performance to restore sluggish live performances again and bring about a digital renaissance. It also leads to the issue of reestablishing a copyright system regarding a livestreamed performance and of preparing a new rate of royalty standards for the use of works in OTT. In addition, a multi-territorial licensing of r ights in musical works is necessary to resolve copyright issues efficiently by applying the same term s to all countries from where the audience comes. In this paper, I examine the legal nature and the decision of copyright fees of performances as an integral part of the music industry.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.850-853
• /
• 2005

This paper presents issues of display hardware architecture, relating to memory, display driver IC architecture, and chip-to-chip interface. To achieve a low power and low cost mobile phone, not only the display architecture must be carefully selected, but also the driver-ICs optimized to accommodate the different modes of operation found in typical handheld devices. The technique of forming a photo sensor in each pixel using TFT and display module architecture are developed to add multi functions in display such as fingerprint recognition, image scanning, and integrated touch screen. Detailed architectures of IC partitioning, high-speed serial interface, D/A converter, and multi functions such as fingerprint recognition and image scanning using photo sensors are important to a power optimized system.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.619-621
• /
• 2005

This paper proposes apractical design method for ship-to-ship missiles' autopilot. When the pre-designed analogue autopilot is implemented in digital way, theygenerally suffer from severe performance degradation and instability problem even for a sufficiently small sampling time. Also, aerodynamic uncertainties can affect the overall stability and this happens more severely when the nonlinear autopilot is digitally implemented. In order to realize a practical autopilot, two main issues, digital implementation problem and compensation for the aerodynamic uncertainties, are considered in this paper. MIMO (multi-input multi-output) nonlinear autopilot is presented first and the input and output of the missile are discretized for implementation. In this step, the discretization effect is compensated by designing an additional control input. Finally, we design a parameter adaptation law to compensate the control performance. Stability analysis and 6-DOF (degree-of-freedom) simulations are presented to verify the proposed adaptive autopilot.

• Smart Structures and Systems
• /
• v.19 no.3
• /
• pp.323-333
• /
• 2017

Waste materials in concrete have been considered as one of the most important issues by the authorities, policy makers and researchers to maintain engineering serviceability in terms of economy, durability and sustainability. Therefore, evaluation and selection of waste materials with respect to multi criteria decision making (MCDM) for the construction industry has been gained importance for recovery and reuse. In this paper, Choquet integral based fuzzy approach is proposed for evaluating the most suitable waste materials with respect to compressive strength, tensile strength, flexural strength, compactness, toughness (resistivity for dynamic loads), water absorption and accessibility. On conclusion, waste tyre and silica fume were determined as the most suitable waste materials for concrete production. The obtained results are recommended to assist the authorities on configuring well designed strategies for construction industry with disposal materials.

• International Journal of CAD/CAM
• /
• v.6 no.1
• /
• pp.51-58
• /
• 2006

In rapid prototyping, the optimal part orientation during fabrication is critical as it can improve part accuracy, minimize the requirement for supports and reduce the production time. Through investigating the geometric issues of STL model and process planning of RPM, This paper establishes optimizing model based on the considerations of staircase effect, support area and production time. The general satisfactory degree function is constructed employing the multi-objective optimization theory based on the general satisfactory degree principle. The best part-building orientation is obtained by solving the function employing generic algorithm. Experiment shows that the methods can effective resolve the part-building orientation in RP.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.5
• /
• pp.459-464
• /
• 2015

An on-line quality control of hot steel products is one of the important issues in the steel industry because of cost minimization. In recent years, relative depth information of surface defects is increasingly required for strict quality control. In this paper, a 3D shape reconstruction scheme for defects on a hot steel surface based on a multi-spectral photometric stereo method is proposed. After simultaneously illuminating a hot steel surface by using vertical/horizontal linearly polarized lights of green and blue light sources, the corresponding 4 images are obtained. The photometric stereo method is then applied with the aid of a GPU (Graphic Processing Unit) to reconstruct the shape of the target surface based on these images. The proposed scheme was validated through experiments.

• Journal of Sensor Science and Technology
• /
• v.25 no.3
• /
• pp.213-217
• /
• 2016

The superhydrophobic and superoleophobic meshes surfaces have been used in various applications such as self-cleaning, anti-icing, gas exchange, oil-water separation, sound-wave penetrable anti-wetting structures, etc. In particular, there are many studies for oil-water separation with environmental issues. Because of high pressure and dynamic environment, oil-water separation filters must have stable surface properties as super-hydrophobicity and superoleophobicity. The oleophobicity of surface depends on the surface chemistry and roughness of the surface. The roughness of oleophobic surface enhances its static contact angle and stability. The multi-scale hierarchical structure provides a stable superhydrophobic state by maintaining a Cassie state. In this research, we fabricated a superoleophobic mesh with a multi-scale hierarchical structure to increase the pressure resistance and adjusted a size of the mesh hole.

• Korean Management Science Review
• /
• v.11 no.1
• /
• pp.73-90
• /
• 1994

Recently the recongnition of Logistics becomes important to enterpries as a means for improving their competition, but the Korea enterpries falls for far behind in management techniques for analyzing realities and problems in the Logistics compare to the advanced countries. Especially the function of inventory control which is most undeveloped in them should be improved in Korea. Inventory is very important in Logistics, but there exists trade-off between inventory level and customer in the service level. It is difficult to coordinate both the reduction in the inventory level and the enhancement in the service level. Its effective technique is a DRP system. In general, it deals with arborescent distribution network in which a given channel member has a single source of supply. This article aims to present a DRP system, and more a DRP system which is flexible and responsive in the multisourcing, multi-echelon distribution network. Related research issues are discussed. Finally, using a DRP system on logistics and the management performance. So we can help the physical distribution improvement of the Korean enterprises.