DOI QR코드

DOI QR Code

Development of a 3D Shape Reconstruction System for Defects on a Hot Steel Surface

고온 금속 표면 결함에 대한 3차원 형상 추출 시스템 개발

  • Received : 2014.12.21
  • Accepted : 2015.01.29
  • Published : 2015.05.01

Abstract

An on-line quality control of hot steel products is one of the important issues in the steel industry because of cost minimization. In recent years, relative depth information of surface defects is increasingly required for strict quality control. In this paper, a 3D shape reconstruction scheme for defects on a hot steel surface based on a multi-spectral photometric stereo method is proposed. After simultaneously illuminating a hot steel surface by using vertical/horizontal linearly polarized lights of green and blue light sources, the corresponding 4 images are obtained. The photometric stereo method is then applied with the aid of a GPU (Graphic Processing Unit) to reconstruct the shape of the target surface based on these images. The proposed scheme was validated through experiments.

Keywords

References

  1. C. H Park, H. M. Bae, J. P Yun, and S. W. Yun, "The automated surface inspection system for hot slab," International Conference on Control, Automation and Systems, pp. 1733-1735, 2013.
  2. R. Woodham, "Photometric method for determining surface orientation from multiple images," Optical Engineeing, vol. 19, pp. 139-144, 1980.
  3. M. L. Smith and L. N. Smith, "Dynamic photometric stereo- a new technique for moving surface analysis," Image and Vision Computing, vol. 23, pp. 841-852, 2005. https://doi.org/10.1016/j.imavis.2005.01.007
  4. B. Bringier, D. Helbert, and M. Khoudeir, "Photometric reconstruction of a dynamic textured surface from just one color image acquisition," Journal of the Optical Society of America. A, vol. 25, no. 3. pp. 566-574, 2008. https://doi.org/10.1364/JOSAA.25.000566
  5. C. Hernandez and G. Vogiatzis, "Self-calibrating a real-time monocular 3d facial capture system," Proceedings of International Symposium on 3D data Processing, Visualization and Transmission, 2010.
  6. G. Fyffe, X. Yu, and P. Debevec, "Single-Shot Photometric Stereo by Spectral Multiplexing," IEEE International Conference on Computational Photography, pp. 1-6, 2011.
  7. D.-Y. Kang, Y. J. Jang, and S.-C. Won, "Development of an inspection system for planar steel surface using multispectral photometric stereo," Optical Engineering, vol. 52, no. 3, 039701, 2013. https://doi.org/10.1117/1.OE.52.3.039701
  8. Y. J. Jang and J. S. Lee, "Development of a reliable real-time 3D reconstruction system for tiny defects on steel surface," Journal of Institute of Control, Robotics and Systems, vol. 19, no. 12, pp. 1061-1066, 2013. https://doi.org/10.5302/J.ICROS.2013.13.9035
  9. B. K. P Horn and M. J. Brooks, "The variational approach to shape from shading," Computer Vision, Graphics, and Image Processing, vol. 33, no. 2, pp. 174-208, 1986. https://doi.org/10.1016/0734-189X(86)90114-3
  10. R. Laganiere, OpenCV 2 Computer Vision Application Programming Cookbook, Packt Publishing, 2011.
  11. J. Sanders and E, Kandrot, CUDA by Example: An Introduction to General-Purpose GPU Programming, Addison-Wesley Professional, 2010.

Cited by

  1. FPGA based System for Pinhole Detection in Cold Rolled Steel vol.21, pp.8, 2015, https://doi.org/10.5302/J.ICROS.2015.15.0083