• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.6
• /
• pp.10-18
• /
• 2007

In consideration of increment and importance for data, an efficient and large storage backup system requires. Existing backup system solutions show some limitations in speed and technical. In order to solve these deficiencies, backup and recovery system of high efficiency and large storage capacity was designed and implemented by using high speed, compression technique and backup accelerator etc. Backup and recovery system applies to multi-threading, multi-processing and multi-streaming technology. And already established systems based on tape, but proposed backup operating model designed on disk. Therefore, the implemented of system leads to these backup media problems as well as solutions to aforementioned issues with existing backup system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.6
• /
• pp.135-139
• /
• 2009

In order to cope with safety issues regarding fisher vessels, a device is required with the real-time monitoring for the safety and risk factors for a capability of informing and alerting function. In embedded modules, there is a trouble that we should design device drivers and application programs for usage of the multi-function sensors in order to detect risk factors. In this paper, we designed hardware circuit and implemented control program of the sensor part using PIC18F, in order to control and process the input and output data of multi-function sensors without device drivers and application programs. We confirmed the operation of multi-function sensor module to generate output data according to sensor operation.

• Journal of Mechanical Science and Technology
• /
• v.19 no.11
• /
• pp.1975-1987
• /
• 2005

An input time delay always exists in practical systems. Analysis of the delay phenomenon in a continuous-time domain is sophisticated. It is appropriate to obtain its corresponding discrete-time model for implementation via digital computers. In this paper a new scheme for the discretization of nonlinear systems using Taylor series expansion and the zero-order hold assumption is proposed. The mathematical structure of the new discretization method is analyzed. On the basis of this structure the sampled-data representation of nonlinear systems with time-delayed multi-input is presented. The delayed multi-input general equation has been derived. In particular, the effect of the time-discretization method on key properties of nonlinear control systems, such as equilibrium properties and asymptotic stability, is examined. Additionally, hybrid discretization schemes that result from a combination of the scaling and squaring technique (SST) with the Taylor series expansion are also proposed, especially under conditions of very low sampling rates. Practical issues associated with the selection of the method's parameters to meet CPU time and accuracy requirements, are examined as well. A performance of the proposed method is evaluated using a nonlinear system with time delay maneuvering an automobile.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.2
• /
• pp.129-136
• /
• 2009

Generally, curved surfaces of ship hull are deformed by flame bending (line heating), multi-press forming, and die-less forming method. The forming methods generate the required in-plane/bending strain or displacement on the flat plate to make the curved surface. Multi-press forming imposes the forced displacements on the flat plate by controlling the position of each pressing points based upon the shape difference between the unfolded flat plate and the curved object shape. The flat plate has been obtained from the unfolding system that is independent of the ship CAD. Apparently, the curved surface and the unfolded-flat surface are expressed by different coordinate systems. Therefore, one of the issues is to find a registration of the unfolded surface and the curved shape for the purpose of minimum amount of forming works by comparing the two surfaces. This paper presents an efficient algorithm to get an optimized registration of two different surfaces in the multi-press forming of ship hull plate forming. The algorithm is based upon the ICP (Iterative Closest Point) algorithm. The algorithm consists of two iterative procedures including a transformation matrix and the closest points to minimize the distance between the unfolded surface and curved surfaces. Thereby the algorithm allows the minimized forming works in ship-hull forming.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.1
• /
• pp.61-77
• /
• 2017

The most challenging issues in the multi-channel MAC of the IEEE 1609.4 standard is how to handle the dynamic vehicular traffic condition with a high mobility, dynamic topology, and a trajectory change. Therefore, dynamic channel coordination schemes between CCH and SCH are required to provide the proper bandwidth for CCH/SCH intervals and to improve the quality of service (QoS). In this paper, we use a Markov model to optimize the interval based on the dynamic vehicular traffic condition with high mobility nodes in the multi-channel MAC of the IEEE 1609.4 standard. We evaluate the performance of the three-dimensional Markov chain based on the Poisson distribution for the node distribution and velocity. We also evaluate the additive white Gaussian noise (AWGN) effect for the multi-channel MAC coordination scheme of the IEEE 1609.4 standard. The result of simulation proves that the performance of the dynamic channel coordination scheme is affected by the high node mobility and the AWGN. In this research, we evaluate the model analytically for the average delay on CCHs and SCHs and also the saturated throughput on SCHs.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.364-364
• /
• 2009

The solar cell is in the spotlight as a future green energy source. In the solar cells based on silicon wafer, the improvement of efficiency is one of crucial issues. One of techniques for high efficiency is texturing on the surface of solar cells. We studied the laser texturing on the surface of multi-crystalline silicon solar cells. The laser texturing followed by chemical etching is adequate for the multi-crystalline structure which have random crystallographic directions. We used the fiber laser for texturing and the SiNx as a masking layer for etching process. We investigated the shapes of holes for texturing in the various laser power conditions and analyzed the holes after removal of thermal damages caused by laser ablation through a 3D profiler.

• Journal of Family Resource Management and Policy Review
• /
• v.17 no.2
• /
• pp.195-218
• /
• 2013

The purpose of this study is to offer suggestions to help immigrated youths of multicultural families become successful members of Korean society while preparing to enter schools or becoming involved in social activities. The study examined the following three issues using grounded theory: (1) the characteristics of cultural adaptation for immigrated youths of multi-cultural families; (2) their acculturation processes; and (3) their different patterns of acculturation experience. The process of acculturation involves (1) feeling timid, (2) feeling regretful and angry, (3) looking around and making an attempt, (4) feeling difficulty and feeling left out, (5) accepting reality and seeing Korea in a positive light. The core of acculturation among the immigrated youths of multicultural families is a limited living in an unfamiliar culture. Five acculturation patterns were found in the current study: (1) Someone who is actively striving for future dreams; (2) someone who adjusts himself/herself to circumstances without plans; (3) someone who passively makes an effort; (4) someone who accepts reality to continue education; and (5) someone who temporarily stays for financial reasons.

• Korean Institute of Interior Design Journal
• /
• v.15 no.6 s.59
• /
• pp.172-177
• /
• 2006

Most of the Korean multi-dwelling houses have less than 20 years of lifespan. Because the environmental issues such as energy consumption, limited resources, and demolition waste problems became been more and more critical, we now need to focus on long lasting and adaptable buildings. Korean wall bearing apartment buildings are constructed with site cast concrete for core, exterior, and interior together with pipes varied, so when the buildings are old and life style of the users changes, it is difficult to maintain and renovate these buildings. In this study, to resolve the problems described above, two types of Korean long life multi-dwelling housing models which represent improved durability and adaptability responding user's needs and life style changes were proposed with various methods as follows: Either column and beam structure or flat slab structure was used to utilize space better. To make maintenance easier and renovation economical for both public space and each unit, plumbing pipes, ducts, and conduits were clustered at the cores and public corridors with access doors and light weight partitions with steel studs and raised floors or above-ceiling spaces were used in lieu of site cast concrete walls and floor slabs with varied pipes.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.1
• /
• pp.50-58
• /
• 2003

Recently we have built a VR(Virtual Reality) theater in Kyongju, Korea, which combines the advantages of VR and IMAX theater. The VR theater provides a virtual environment for several hundreds of people at the same time. The VR theater can be characterized by a single shared screen and by multiple inputs from several hundreds of people. In this case, multi-user interaction is different from that of networked VR systems and must be reconsidered. This paper defines the multi-user interaction in such a VR theater as Audience Interaction, and discusses key issues for the implementation of the Audience Interaction. This paper also presents a real implementation example in the Kyongju VR theater.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.1
• /
• pp.55-60
• /
• 2010

For battery-powered device applications, which grow rapidly in the electronic market today, low-power becomes one of the most important design issues of CMOS VLSI circuits. A multi-VDD system, which uses more than one power-supply voltage in the same system, is an effective way to reduce the power consumption without degrading operating speed. However, in the multi-VDD system, level converters should be inserted to prevent a large static current flow for the low-to-high conversion. The insertion of the level converters induces the overheads of power consumption, delay, and area. In this paper, we propose a new level converter which can provide the level up/down conversions for the various input and output voltages. Since the proposed level converter uses only one power-supply voltage, it has an advantage of reducing the complexity in physical design. In addition, the proposed level converter provides lower power and higher speed, compared to existing level converters.