• International Journal of Industrial Entomology and Biomaterials
• /
• v.21 no.2
• /
• pp.185-187
• /
• 2010

Most studies of the black soldier fly, Hermitia illucens, widely distributed throughout Southeast Asia and America focused on the use of larvae for recycling various organic materials and feed for fish and livestock. To recognize the instars of the soldier fly's larvae, we examined the number of exuviae originated from each larva from 1st instar to pupa. The weight and the head capsule width of the black soldier fly larvae also confirmed that the black soldier fly was passed through 6th instars. In addition, we found that the black soldier fly larvae had a well developed mandibular-maxillary complex, similar to those reported from the larvae of scavengers including Odontomyia cincta, Neopachygaster maculicornis, Ptecticus brunettii and Stratiomys ruficornis.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.2
• /
• pp.185-196
• /
• 2013

In Yongwon channel, its natural flow of seawater is blocked by the construction of Busan Newport including the container berth. The channel was transformed into a narrow and long one, where it is possible that ships are only allowed to pass through the north-side channel of Gyeonmado located at the point of river mouth to Songjeongcheon. In addition, Yongwon channel is approximately 100 m wide on average and 3,600 m long, which has the highest slenderness ratio (length/width=36). So it is considered that the changes in the terrain characteristics of Yongwon channel is likely to alter the circulation of sea water, thereby changing its water quality. In this study, the seasonal change and the spatial variation of the water quality in Yongwon channel was analyzed for the effect of land pollution using the measurement data. The mass balance calculation method is used to analyze the water pollution resulting from sediment pollutants. This result shows that the improvement of the water quality in Yongwon channel can be obtained from the sewer pipe modification and the environmental dredging.

• Fashion & Textile Research Journal
• /
• v.13 no.3
• /
• pp.398-408
• /
• 2011

This study shows that the self-satisfaction individually is rising and social life is attracted effective and successful in image making field by structuring the facial image improvement program through experimental study in order to improve unbalance of women's face. Experiment is conducted by electing 3 samples for 12 weeks and analyzing the measurement and visual analysis, infrared thermography, and evaluation of experts in order to check the facial unbalance. Subject 1 had the effect at approximately in 4 weeks with the severely distorted chin line and mouth appendage. The facial outline became softer to turn entire image to be softer and more feminine. Subject 2 had the severe distortion of location and size of eyes and nose. But the skin was getting better at first, followed by eyes getting clearer with the location changed in left and right. Subject 3 had the twisted nose and lower chin, but after two weeks, the eye area and skin were better and the width of left and right chin was similarly changed. On the basis of the above research result, the program to effectively improve the image was structured and presented with the resolution of facial unbalance. Program is consist of the training of breathing method, face washing method, facial muscle exercise.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.11
• /
• pp.51-57
• /
• 2018

In this paper, we studied about the extraction of the parameter and implementation of speechreading system to recognize the Korean 8 vowel. Face features are detected by amplifying, reducing the image value and making a comparison between the image value which is represented for various value in various color space. The eyes position, the nose position, the inner boundary of lip, the outer boundary of upper lip and the outer line of the tooth is found to the feature and using the analysis the area of inner lip, the hight and width of inner lip, the outer line length of the tooth rate about a inner mouth area and the distance between the nose and outer boundary of upper lip are used for the parameter. 2400 data are gathered and analyzed. Based on this analysis, the neural net is constructed and the recognition experiments are performed. In the experiment, 5 normal persons were sampled. The observational error between samples was corrected using normalization method. The experiment show very encouraging result about the usefulness of the parameter.

• Structural Engineering and Mechanics
• /
• v.77 no.1
• /
• pp.103-114
• /
• 2021

Ultra high strength concrete (UHSC) originally proposed by Richards and Cheyrezy (1995) composed of cement, silica fume, quartz sand, quartz powder, steel fibers, superplasticizer etc. Later, other ingredients such as fly ash, GGBS, metakaoline, copper slag, fine aggregate of different sizes have been added to original UHSC. In the present investigation, the combined effect of coarse aggregate (6mm - 10mm) and steel fibers (0.50%, 1.0% and 1.5%) has been studied on UHSC mixes to evaluate mechanical and fracture properties. Compressive strength, split tensile strength and modulus of elasticity were determined for the three UHSC mixes. Size dependent fracture energy was evaluated by using RILEM work of fracture and size independent fracture energy was evaluated by using (i) RILEM work of fracture with tail correction to load - deflection plot (ii) boundary effect method. The constitutive relationship between the residual stress carrying capacity (σ) and the corresponding crack opening (w) has been constructed in an inverse manner based on the concept of a non-linear hinge from the load-crack mouth opening plots of notched three-point bend beams. It was found that (i) the size independent fracture energy obtained by using above two approaches yielded similar value and (ii) tensile stress increases with the increase of % of fibers. These two fracture properties will be very much useful for the analysis of cracked concrete structural components.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.24 no.2
• /
• pp.55-64
• /
• 1988

Stow nets have widely been used in the western sea of Korea from the olden age. The original structure of a stow net is a large square-sectional bag net made of 4 netting panels, and the front fringes of top and bottom panels are connected to the top and bottom beams respectively. Wire ropes, which is originated from the holding anchor are gradually forked and biforked, and finally 4 pieces of wire rope (biforked pendants) are jointed to each beam. Much convenience caused by long and heavy beams were problemed, then some studies have been carried out to improve the net since 1930's. The most effective improvement were achieved in 1980 by Mr. Han and his colleagues. The key point of improvement was that the beams were removed and the belt shaped shearing device made by canvas was attached to the side panels, the head rope and ground rope to the front fringe of top and bottom panel, and biforked pendants are joined to the shearing device. Even though this is the epoch-making improvement of a stow net, the further study should be required to find out more effective method. The authors carried out a model experiment on the stow net to determine the vertical and horizontal opening of a net mouth, and also examine the front, top and side-view configuration of the net. The model net was constructed depending on the Similarity Law of Fishing Gear in 1/10 and 1/20 scale and set against to the current at shallow and speedy flowing channel. The vertical and horizontal openings were determined by using scaled bamboo poles, and the configuration was observed by using specially prepared observation platform and underwater observation glass, and also photographed by using specially prepared underwater photographic equipment. The results obtained can be summarized as follows: 1. The opening height and width of the shearing device varied in accordance with the relative length of the biforked pendants. Considering the height and width of shearing device in 6 cases of the arrangement system of biforked pendants, the best result was obtained in the case that the 2nd, 3rd and 4th pendents from the bottom-most was 5%, 9% and 4% longer than that. 2. On the top-view configuration the excessive deformation of head rope and ground rope were observed. In the actual net, 54m long head rope and ground rope were attached to the front fringe of top and bottom panels so that the head rope may be lifted to make the net mouth open highly. But actually the head rope and the ground rope are streamed backward without any lift, and also the netting followed the ropes were deformed until the 2/5 in the whole length of the net. This deformation may be guessed to disturb the entrance of fish school into the net and also caused the net to get caught by obstacles in the sea bed and to be broken largely. 3. Hydrodynamic resistance R of the actual net may be deduced as R(kg)=29.2$\times$103 v1.65. It is also expressed as R(kg)=5.9$\times$d/l$\times$ab v1.65. depending on the formula deduced by Koyama to estimate the resistance of trawl nets, where d/l denote the ratio between diameter of netting twine and length of mesh leg in every part of side panel, a and b, the stretched circumference of the mouth and the stretched length of the net, respectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.2
• /
• pp.106-116
• /
• 2001

A serious of studies on the fishing gear and system of the East Sea trawl fishery was carried out to improve the fishing efficiency and the working conditions. As the first step of these studies, the fishing gear and system of the traditional East Sea trawl were checked in order to solve the some problems, such as the poor sheering efficiency of net mouth, the inconvenient fishing system of the side trawl and etc. And then the fishing system was reorganized from the side trawl into the stern trawl by setting up the net drum system on the stern deck, and introduction of two types of new designed nets, one for mainly the midwater trawl and the other for the bottom trawl. The results of the field experiment on the modified system and nets can be summarized as follows : 1. the modified system was well worked and could save the man-labour by about 80%. 2. The sheering efficiency of the improved net, A type was improved to 20 m height and 30 m width in the net mouth, and that of B type net, to 10 m height and 33 m width, compared with 1.5 m height and 15 m width in the traditional net. 3. Catch efficiency of pink shrimp in A or B type net was better about 3 or 5 times than that of traditional net, and in B net, for herring and other bottom fishes is better about 2 times than that of the traditional net.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.4
• /
• pp.340-349
• /
• 1995

There are several problems in a fishing by the midwater pair trawl net which is used in Denmark; steeply decreasing of the net height with the towing speed increasing, the larger volume of the fishing gear in comparison with the size of the trawler, and catching of a float in a mesh, etc. To prevent steeply decreasing of the net height with the towing speed increasing and catching of a float in a mesh, it is sometimes more useful to use the kite instead of floats. This paper describes the hydrodynamic drag and the opening efficiency of the midwater pair trawl net and the midwater kite pair trawl net obtained by the model test in the circulation water channel. The results can be summarized as follows; 1. The hydrodynamic drag of the midwater kite pair trawl net is about 0.7 times smaller than that of the midwater pair trawl net. 2. The net height, mouth area and filtering volume of the midwater kite pair trawl net are smaller then those of the midwater pair trawl net when the towing speed is below 2.5knots, almost the same at 2.7knots, and are larger over 3.0knots. The net width of the midwater kite pair trawl net is same as that of the midwater pair trawl net. 3. The shapes of net mouth of both net are an oval steeply flatted with the towing speed increasing. The filtering volume of the midwater kite pair trawl net is larger then that of the midwater pair trawl net by 3% at 3.0knots, 11% at 4.0knots, and 16% at 5.0knots respectively.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.11 no.4
• /
• pp.201-215
• /
• 1999

Field measurements were made for long- and short-period waves and current velocities at the harbor mouth using pressure-type wave gauges and a current meter, respectively, at the Gamcheon Harbor which has a rectangular shape with a narrow entrance. The measured pressure data were subjected to spectral analyses after removing tidal effects by applying trend removal and high-pass filtering. For the band averaging of the raw spectra, in order to obtain good resolution over the entire frequency, instead of a constant band width, variable band widths were used, which gradually increase as marching from the lowest frequency towards higher frequencies. The Helmholtz resonance mode at the Gamcheon Harbor shows the relative amplification ratio of 9.2 at the wave period of 31.7 minutes, which is quite large compared with those at the harbors located on the east coast of Korea. The second and the third resonance period was 10.3 and 5.4 minute, respectively. On the other hand, the analysis of every 24 hours data shows that during storms the spectral densities are very large compared to those during calm seas and also the second and third resonances are predominant.

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.2
• /
• pp.259-271
• /
• 1992

This study was designed to investigate the criteria of the perfect smile that was necessary to improve the esthetic problem in oral and maxillo-facial region and treating the anterior tooth region. The author took the facial straight photograph of 240 university students(male : 129, female : 111) in a resting and a smiling position, measured and analized the lip pattern and the relation between the lip and the teeth when they were smiling. Besides, 10 members of committee for appraisal (dentist : 5 persons, professor of the college of fine arts : 5 persons) estimated the smiling pattern. After that the author have compared and analyzed the obtained results. The results obtained were as follows : 1. In the shape of the upper lip, when the upper lip curved downward, it was 42.92% , straight was 45.00% and curved upward was 12.08%. The group in which the upper lip curved upward was the most esthetic. 2. In the relation between the upper lip and the teeth, high smile was 29.17%, average smile was 55.83% and low smile was 15.00%. The group of average smile was the most esthetic. 3. In the parallel relation between the lower lip and maxillary anterior incisal curvature, the group of paralled was 60.42%, the group of straight was 34.17% and the group of reverse was 5.41%. The group of parallel was the most esthetic. 4. In the relationship between maxillary anterior incisor and lower lip, the group of the maxillary anterior incisor were slightly covered by the lower lip was 10.42%, the group of the maxillary anterior teeth touched to the lower lip was 35.83%, and the no-touching was 53.75%. The group of the maxillary anterior teeth touched to the lower lip was the most esthetic. 5. In the teeth displayed in a smile, displayed to the canine was 0.84%, displayed to the first premolar was 19.17%, displayed to the second premolar was 57.92%, displayed to the first molar was 20.00% and displayed to the second molar was 2.08%. The group of displayed to the first molar was the most esthetic. 6. At smiles, the width of the mouth corner was 0.46 times of the full face width, 0.95 times of the interpupillary distance, and 1.23 times of the resting position. 7. At smiles, the lengh of the upper lip was 0.71 times and lower lip was 0.93 times of the length in the resting position.