• Title/Summary/Keyword: morphology control

Search Result 1,171, Processing Time 0.024 seconds

Effects of Penicillin G on Morphology and Certain Physiological Parameters of Lactobacillus acidophilus ATCC 4356

  • Khaleghi, M.;Kermanshahi, R. Kasra;Zarkesh-Esfahani, S.H.
    • Journal of Microbiology and Biotechnology
    • /
    • v.21 no.8
    • /
    • pp.822-829
    • /
    • 2011
  • Evidence shows that probiotic bacteria can undergo substantial structural and morphological changes in response to environmental stresses, including antibiotics. Therefore, this study investigated the effects of penicillin G (0.015, 0.03, and 0.06 mg/l) on the morphology and adhesion of Lactobacillus acidophilus ATCC 4356, including the colony morphotype, biofilm production, hydrophobicity, $H_2_O2$ formation, S-layer structure, and slpA gene expression. Whereas only smooth colonies grew in the presence of penicillin, rough and smooth colony types were observed in the control group. L. acidophilus ATCC 4356 was found to be hydrophobic under normal conditions, yet its hydrophobicity decreased in the presence of the antibiotic. No biofilm was produced by the bacterium, despite testing a variety of different culture conditions; however, treatment with penicillin G (0.015-0.06 mg/l) significantly decreased its production of $H_2_O_2$ formation and altered the S-layer protein structure and slpA gene expression. The S-protein expression decreased with 0.015 mg/l penicillin G, yet increased with 0.03 and 0.06 mg/l penicillin G. In addition, the slpA gene expression decreased in the presence of 0.015 mg/l of the antibiotic. In conclusion, penicillin G was able to alter the S-layer protein production, slpA gene expression, and certain physicochemical properties of Lactobacillus acidophilus ATCC 4356.

Morphological Variation and Luminescence Properties of ZnO Micro/Nanocrystals Synthesized by Thermal Evaporation Method

  • Lee, Won-Jae;Lee, Geun-Hyoung
    • Korean Journal of Materials Research
    • /
    • v.27 no.10
    • /
    • pp.530-533
    • /
    • 2017
  • ZnO micro/nanocrystals with different morphologies were synthesized by thermal evaporation of various zinc source materials in an air atmosphere. Zinc acetate, zinc carbonate and zinc iodide were used as the source materials. No catalysts or substrates were used in the synthesis of the ZnO crystals. The scanning electron microscope(SEM) image showed that the morphology of ZnO crystals was strongly dependent on the source materials, which suggests that source material is one of the key factors in controlling the morphology of the obtained ZnO crystals. Tetrapods, nanogranular shaped crystals, spherical particles and crayon-shaped crystals were obtained using different source materials. The X-ray diffraction(XRD) pattern revealed that the all the ZnO crystals had hexagonal wurtzite crystalline structures. An ultraviolet emission was observed in the cathodoluminescence spectrum of the ZnO crystals prepared via thermal evaporation of Zn powder. However, a strong green emission centered at around 500 nm was observed in the cathodoluminescence spectra of the ZnO crystals prepared using zinc salts as the source materials.

Synthesis and Nucleation Behavior of MoO3 Nano Particles with Concentration of Precursors (전구체 농도에 따른 MoO3 나노 분말 합성 및 핵생성 거동)

  • Lee, Seyoung;Kwon, Namhun;Roh, Jaeseok;Lee, Kun-Jae
    • Journal of Powder Materials
    • /
    • v.27 no.5
    • /
    • pp.394-400
    • /
    • 2020
  • Molybdenum trioxide (MoO3) is used in various applications including sensors, photocatalysts, and batteries owing to its excellent ionic conductivity and thermal properties. It can also be used as a precursor in the hydrogen reduction process to obtain molybdenum metals. Control of the parameters governing the MoO3 synthesis process is extremely important because the size and shape of MoO3 in the reduction process affect the shape, size, and crystallization of Mo metal. In this study, we fabricated MoO3 nanoparticles using a solution combustion synthesis (SCS) method that utilizes an organic additive, thereby controlling their morphology. The nucleation behavior and particle morphology were confirmed using ultraviolet-visible spectroscopy (UV-vis) and field emission scanning electron microscopy (FE-SEM). The concentration of the precursor (ammonium heptamolybdate tetrahydrate) was adjusted to be 0.1, 0.2, and 0.4 M. Depending on this concentration, different nucleation rates were obtained, thereby resulting in different particle morphologies.

IMPACT OF NEIGHBORS IN SDSS GALAXY PAIRS

  • MOON, JUN-SUNG;YOON, SUK-JIN
    • Publications of The Korean Astronomical Society
    • /
    • v.30 no.2
    • /
    • pp.469-471
    • /
    • 2015
  • How galaxies are affected by their neighboring galaxies during galaxy-galaxy interactions is a long-standing question. We investigate the role of neighbors in galaxy pairs based on the SDSS data release 7 and the KIAS value-added galaxy catalog. Three groups of galaxies are identified: (a) galaxies with an early-type neighbor, (b) with a late-type neighbor, and (c) isolated ones with no neighbor. We compare their UV + optical colors and $H{\alpha}$ emission as indicators of the recent star-formation rate (SFR). Given that galaxies show systematic differences in SFR as functions of morphology, luminosity, and large-scale environments, we construct a control sample in which the galaxies have the same conditions (in terms of morphology, luminosity, and large-scale environment) except for the neighbor's properties (i.e., morphology, mass, and distance). The results are as follows. (1) Galaxies with a late-type companion demonstrate more enhanced SFR than those with an early-type companion. (2) Galaxies with an early-type neighbor show NUV- and u-band derived SFRs that are even lower than that of isolated galaxies, while they have similar or slightly higher $H{\alpha}$-based SFR compared to isolated ones.

The Effects of Hyangsayukgunja-tang Extract on Indomethacin-Induced Gatric Mucosal Lesions (향사육군자탕(香砂六君子湯)의 Indomethacin 유발 위점막 손상에 대한 효과)

  • Baik, Tae-Hyun;Kong, Kyung-Hwan
    • The Journal of Internal Korean Medicine
    • /
    • v.22 no.4
    • /
    • pp.589-599
    • /
    • 2001
  • Objective: This study was carried out to investigate the effects of Hyangsayukgunja-tang extract on indomethacin-induced gastric mucosal lesions of mice. Methods: To evaluate the effects of Hyangsayukgunja-tang extract and Misoprostol, the morphology of gastric mucosa, and the distribution of mucose cells, PNA(Peanut Agglutinin), ICAM(intercellular adhesion molecule), and apoptotic cells were observed. Hyangsayukgunja-tang extract and Misoprostol were intragastric injected to the test groups at hour 72 before and just before indomethacin treatment(HYT-J, HYT-72, M-J, M-72), while the INDO group was injected only with indomethacin and the control group was subcutaneously injected only with saline. Results: The gastric mucosal lesions incresed in the fundus and body of INDO group, but softened in HYT group and M group, the effects were more excellent in the HYT-72, M-72 groups than the HYT-J, M-J groups and in the HYT group than M group. The disappearance of surface and neck mucose cells were shown in INDO group, but softened in HYT group and M group. The mucosal configuration of HYT-72 group was the same as control group. The numerical increase of PNA positive reaction in cytoplasm of perietal cells were appeared in INDO group. The PNA positive reaction in HYT group and Miso-group were shown in surface mucous cells and microvilli of apical surface in chief cells as control group, and were the same as control group in all mucosa of HYT-72 group. The distribution of ICAM positive cells, increased in INDO group, but decreased in M-72 group, and were the same as control group in HYT-72 group. The apoptotic cells, increased noticeably in gastric mucosa of INDO group, decreased in HYT group and M group, and decreased noticeably in HYT-72 group. Conclusions: Hyangsayukgunja-tang extract had excellent effects on indomethacin-induced gastric mucosal lesions.

  • PDF

Quality Control Probes for Spot-Uniformity and Quantitative Analysis of Oligonucleotide Array

  • Jang, Hyun-Jung;Cho, Mong;Kim, Hyung-Hoi;Kim, Cheol-Min;Park, Hee-Kyung
    • Journal of Microbiology and Biotechnology
    • /
    • v.19 no.7
    • /
    • pp.658-665
    • /
    • 2009
  • Quality control QC for spot-uniformity is a critical point in fabricating an oligonucleotide array, and quantification of targets is very important in array analysis. We developed two new types of QC probes as a means of confirming the quality of the uniformity of attached probes and the quantification of targets. We compared the signal intensities and fluorescent images of the QC and target-specific probes of arrays containing only target-specific probes and those containing both QC and target-specific probes. In a comparison of quality control methods, it was found that the arrays containing QC probes could check spot-uniformity or spot defects during all processes of array fabrication, including after spotting, after washing, and after hybridization. In a comparison of quantification results, the array fabricated by the method using QC probes showed linear and regular results because it was possible to normalize variations in spot size and morphology and amount of attached probe. This method could avoid errors originating in probe concentration and spot morphology because it could be normalized by QC probes. There were significant differences in the signal intensities of all mixtures (P<0.05). This result indicates that the method using QC probes is more useful than the ordinary method for quantification of mixed target. In the quantification of mixed targets, this method could determine a range for mixed targets of various amounts. Our results suggest that methods using QC probes for array fabrication are very useful to the quality control of spots in the fabrication processes of quantitative oligonucleotide arrays.

Fructans from Renga Renga Lily (Arthropodium cirratum) Extract and Frutafit as Prebiotics for Broilers: Their Effects on Growth Performance and Nutrient Digestibility

  • Vidanarachchi, J.K.;Iji, P.A.;Mikkelsen, L.L.;Choct, M.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.23 no.5
    • /
    • pp.580-587
    • /
    • 2010
  • An experiment was conducted to evaluate the effect of dietary water-soluble carbohydrate extract from Renga renga lily (Arthropodium cirratum) and a commercial product, $Frutafit^{{\circledR}}$ (both fructans) on the performance, organ weights, ileal digestibility and gut morphology of male Cobb broiler chickens. There were six treatment groups: a negative control with no supplements, a positive control supplemented with 45 ppm Zn-bacitracin, and four test diets each supplemented with Renga renga lily extract or Frutafit at 5 or 10 g/kg diet. Supplementation with low levels of Renga renga lily extract and Frutafit in the diet did not affect productive parameters, whereas the inclusion of a high level of Frutafit had a negative effect on BWG and FI compared with birds fed the negative control diet. The addition of an antibiotic to the diet significantly improved (p<0.05) the BWG and FCR of broilers. Apparent ileal digestibility of dry matter, starch, protein and fat was not affected (p>0.05) by supplementation with both levels of lily extract and the low level of Frutafit. The apparent ileal digestibility of dry matter, protein and fat was decreased (p<0.05) by the high level of Frutafit. The apparent metabolisable energy (AME) of the diets fed the high level of Frutafit was approximately 0.2 MJ/kg DM lower than that of the negative control group. The addition of Zn-bacitracin increased (p<0.05) the apparent ileal digestibility of fat. The relative weight of the liver was higher (p<0.05) in broilers supplemented with the high level of Frutafit than for negative control birds at 14 and 35 d of age. Feeding Renga renga lily extract or Frutafit had no effect on the gut morphology of birds on d 14 and 35. It can be concluded that dietary inclusion of fructans from the two sources used in this study affected broiler performance differently and in a dose-dependent manner.

Characterization of structural and field emissive properties of CNTs grown by ICP-CVD method as a function of Ni and Co catalysts thickness (ICP-CVD 방법에 의해 성장된 탄소나노튜브의 Ni 및 Co 촉매 두께에 따른 구조적 물성 및 전계 방출 특성 분석)

  • Kim, Jong-Pil;Kim, Young-Do;Park, Chong-Kyun;Uhm, Hyun-Seok;Park, Jin-Seok
    • Proceedings of the KIEE Conference
    • /
    • 2003.07c
    • /
    • pp.1574-1576
    • /
    • 2003
  • Carbon nanotubes (CNTs) were grown on the TiN-coated silicon substrate with different thickness of Ni and Co catalysts layer at $600^{\circ}C$ using inductively coupled plasma-chemical vapor deposition (ICP-CVD). The Ni and Co catalysts were formed using the RF magnetron sputtering system with various deposition times. It was found that the growth of CNTs was strongly influenced by the surface morphology of Ni and Co catalysts. With increasing deposition time, the thickness of catalysts increased and the grain boundary size of catalysts increased. The surface morphology of catalysts and CNTs were elucidated by SEM. The Raman spectrum further confirmed the graphitic structure of the CNTs. The turn-on field of CNTs grown on Ni and Co catalysts was about 2.7V/pm and 1.9V/pm respectively. Field emission current density of CNTs grown on Ni and Co catalysts was measured as $11.67mA/cm^2$ at $5.5V/{\mu}m$ and $1.5mA/cm^2$ at $5.5V/{\mu}m$ respectively.

  • PDF

Cracks evolution and multifractal of acoustic emission energy during coal loading

  • Kong, Xiangguo;Wang, Enyuan;He, Xueqiu;Liu, Xiaofei;Li, Dexing;Liu, Quanlin
    • Geomechanics and Engineering
    • /
    • v.14 no.2
    • /
    • pp.107-113
    • /
    • 2018
  • Coal samples with different joints morphology were subjected to uniaxial compression experiments, cracks evolution was recorded by Nikon D5300 and acoustic emission (AE) energy signals were collected by AEwin Test for Express-8.0. During loading process, coal samples deformed elastically with no obvious cracks changes, then they expanded gradually along the trace of the original cracks, accompanied by the formation of secondary cracks, and eventually produced a large-scale fracture. It was more interesting that the failure mode of samples were all shear shape, whatever the original cracks morphology was. With cracks and damage evolution, AE energy radiated regularly. At the early loading stage, micro damage and small scale fracture events only induced a few AE events with less energy, while large scale fracture leaded to a number of AE events with more energy at the later stage. Based on the multifractal theory, the multifractal spectrum could explain AE energy signals frequency responses and the causes of AE events with load. Multifractal spectrum width (${\Delta}{\alpha}$), could reflect the differences between the large and small AE energy signals. And another parameter (${\Delta}f$) could reflect the relationship between the frequency of the least and greatest signals in the AE energy time series. This research is helpful for us to understand cracks evolution and AE energy signals causes.