• Journal of IKEEE
• /
• v.1 no.1 s.1
• /
• pp.1-10
• /
• 1997

It is well-known that rectangular bulk-Si sensors prepared by etch or epi etch-stop micromachining technology are already in practical use today, but the conventional bulk-Si sensor shows some drawbacks such as large chip size and limited applications as silicon sensor device is to be miniaturized. We consider a circular-shape SOI(Silicon-On-Insulator) micro-cavity technology to facilitate multiple sensors on very small chip, to make device easier to package than conventional sensor like pressure sensor and to provide very high over-pressure capability. This paper demonstrates the cross-functional results for stress analyses(targeting $5{\mu}m$ deflection and 100MPa stress as maximum at various applicable pressure ranges), for finding permissible diaphragm dimension by output sensitivity, and piezoresistive sensor theory from two-type SOI structures where the double SOI structure shows the most feasible deflection and small stress at various ambient pressures. Those results can be compared with the ones of circular-shape bulk-Si based sensor$^{[17]}. The SOI micro-cavity formed the sensors is promising to integrate with calibration, gain stage and controller unit plus high current/high voltage CMOS drivers onto monolithic chip.

• Journal of Magnetics
• /
• v.10 no.2
• /
• pp.41-43
• /
• 2005

We have investigated an optical waveguide isolator with a multimode interference section by wafer direct bonding, operating at a wavelength $1.55\;{\mu}m$. In order to fabricate the device for monolithic integration, the wafer direct bonding between a magnetic garnet material as a cladding layer and a semiconductor guiding layer has been achieved. We found that wafer direct bonding between InP and GGG $(Gd_3Ga_5O_{12})$ is effective for the integration of a waveguide optical isolator. The isolation ratio was obtained to be 2.9 dB in the device.

• ETRI Journal
• /
• v.34 no.6
• /
• pp.946-949
• /
• 2012

We present the optimization of a birefringence-enhanced-waveguide (BWG)-based polarization beam splitter (PBS) in a Mach-Zehnder interferometer (MZI) configuration and analyze the structure-dependent or polarization-dependent phase difference, using a delay-line MZI (DL-MZI). We fabricate the DL-MZI using silica-based planar lightwave circuit technology and, using the DL-MZI, demonstrate the ability to optimize a PBS by measuring the birefringence of the BWG and structure-dependent phase offset.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.71-71
• /
• 2009

This paper describes a simple, on-chip CMOS compatible the thin-film inductor applied for the dc-dc converters. A fully CMOS-compatible thin-film inductor with a bottom NiFe core is integrated with the DC-DC converter circuit on the same chip. By eliminating ineffective top magnetic layer, very simple process integration was achieved. Fabricated monolithic thin film inductor showed fairly high inductance of 2.2 ${\mu}H$ and Q factor of 11.2 at 5MHz. When the DC-DC converter operated at $V_{in}=3.3V$ and 5MHz frequency, it showed output voltage $V_{out}=8.0V$, and corresponding power efficiency was 85%.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.2
• /
• pp.215-220
• /
• 2016

Monolithically integrated devices are strongly desired in next generation power ICs to reduce the chip size and improve the efficiency and frequency response. Three examples of the embedment of different functional diode(s) into AlGaN/GaN heterojunction field-effect transistors are presented, which can minimize the parasitic effects caused by interconnection between devices.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1513_1514
• /
• 2009

This paper reports on a fabrication of novel substrate integrated waveguide (SIW)-based shielded stripline applicable to the broadband transverse electromagnetic (TEM) single-mode propagation. We suggested a structure for half-SIW and half-shielded stripline, which combined through the benzocyclobutene (BCB) bonding layer. The electrical interconnection between the sidewall of anisotropic wet-etched silicon and patterned BCB layers is measured subsequent to the metalization on the side wall. The proposed SIW-based shielded stripline has great potential in terms of simple fabrication, integration with planar circuits and monolithic system fabricated on a SIW structure.

• Journal of the Korean Vacuum Society
• /
• v.8 no.4B
• /
• pp.536-540
• /
• 1999

We have developed a refractory WNx self-aligned gate GaAs metal-semiconductor field-effect transistor(MESFET) using $SiO_2$ side-wall process. The MESFET hasa fully ion-implanted, planar, symmetric self-alignment structure, and it is quite suitable for integration. The uniform trans-conductance of 354nS/mm up to Vgs=+0.6V and the saturation current of 171mA/mm were obtained. As high as 43GHz of cut-off frequency hs been realized without any de-embedding of parasitic effects. The refractory WNx self-aligned gate GaAs MESFET technology is one of the most promising candidates for realizing linear power amplifier ICs and multifunction monolithic ICs for use in the digital mobile communication systems such as hand-held phone(HHP), personal communication system (PCS) and wireless local loop(WLL).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.574-577
• /
• 2004

A coupler is a microwave passive component used for power coupling or dividing. Regarding the trend of current telecommunication systems it is highly desirable for monolithic integration of passive components as such LTCC(Low temperature cofired ceramics) technology offers potential advantage in size, cost and performance. Utilizing LTCC technology a 2012 size type dual band coupler for DCS and EGSM band was fabricated. Its characteristics such as coupling, insertion loss, isolation and directivity was measured and compared with simulation results

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.392-395
• /
• 2004

A coupler is a microwave passive component used for power coupling or dividing. Regarding the trend of current telecommunication systems it is highly desirable for monolithic integration of passive components as such LTCC(Low temperature cofired ceramics) technology offers potential advantage in size, cost and performance. Utilizing LTCC technology a 1608 size type dual band coupler for DCS and EGSM band was fabricated. Its characteristics such as coupling, insertion loss, isolation and directivity was measured and compared with simulation results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.861-863
• /
• 2003

In this work, the preparations and characteristics of capacitors and inductors for RF IC as a integrated devices are investigated. These kinds of capacitors and inductors can be applicable to the passive components utilized in voltage controlled oscillator(VCO), low noise amplifier(LAN), mixer and synthesizer for mobile telecommunication of radio frequency band(900 MHz to 2.2GHz), and in a library of monolithic microwave integrated circuit(MMIC). The results show that these inductors and capacitors array for RF IC may be applicable to the RF IC passive components for mobile telecommunication.