• 수산해양기술연구
• /
• 제45권3호
• /
• pp.177-187
• /
• 2009

This paper describes a automatic video surveillance system(AVSS) with long range and 360$^{\circ}$ coverage that is automatically rotated in an elevation over azimuth mode in response to the TTM(tracked target message) signal of vessels tracked by ARPA(automatic radar plotting aids) radar. This AVSS that is a video security and tracking system supported by ARPA radar, CCTV(closed-circuit television) camera system and other sensors to automatically identify and track, detect the potential dangerous situations such as collision accidents at sea and berthing/deberthing accidents in harbor, can be used in monitoring the illegal fishing vessels in inshore and offshore fishing ground, and in more improving the security and safety of domestic fishing vessels in EEZ(exclusive economic zone) area. The movement of the target vessel chosen by the ARPA radar operator in the AVSS can be automatically tracked by a CCTV camera system interfaced to the ECDIS(electronic chart display and information system) with the special functions such as graphic presentation of CCTV image, camera position, camera azimuth and angle of view on the ENC, automatic and manual controls of pan and tilt angles for CCTV system, and the capability that can replay and record continuously all information of a selected target. The test results showed that the AVSS developed experimentally in this study can be used as an extra navigation aid for the operator on the bridge under the confusing traffic situations, to improve the detection efficiency of small targets in sea clutter, to enhance greatly an operator s ability to identify visually vessels tracked by ARPA radar and to provide a recorded history for reference or evidentiary purposes in EEZ area.

• 재활복지공학회논문지
• /
• 제9권2호
• /
• pp.153-160
• /
• 2015

최근 IT융합 기술의 발달에 따라 의료기기에 대한 IT융합 기술은 비약적으로 발전하고 있다. 응급 상황시 가장 기본적으로 우선적으로 시행 되어야 하는 것은 환자에 호흡이고 동시에 응급 환자에 기도를 유지하고 응급 처치를 해야 한다. 그러나 기도를 확보하는 술기인 기관 내 삽관을 하려면 응급 처치 사가 능숙한 경력과 경험을 요구하며 그렇지 않으면 술기에 실패 해 환자에서 후유증을 가져다 줄 수도 있는 매우 민감하고 중요한 술기이다. 이러한 이유로 현재 기관 내 삽관 술기의 성공률은 50%정도로 높은 수준이 아니다. 이러한 문제점을 보완하고자 본 논문에서는 기관 내 삽관을 하는 과정에서 인투베이션 튜브에 내시경 카메라를 삽입하여 삽관하고 실시간 모니터링과 무선 영상 전 송 방법인 스트리밍을 이용하여 스마트기기에서도 모니터링을 가능하게 하여 응급 처치 사들의 기관 내 삽관 성공률을 높이는데 목적이 있다.

• 한국수산과학회지
• /
• 제37권4호
• /
• pp.337-344
• /
• 2004

A real-time surveillance system of the inshore fishing ground was constructed to identify and detect discrete targets, such as illegal fishing vessels. This paper describes measurements made with a combination of sensors, such as radar, CCTV camera, and GPS receivers, for monitoring the fishing activity of small vessels within the fishing limit zones of the inshore waters. The CCTV camera system was used to confirm detection and to classify the type of target. The location of legal vessels distributed in coastal waters was acquired from each GPS system of ships connected to commercial satellite communication network. The surveillance system was networked via LAN to one host PC with the use of electronic navigational charts (ENC) and a radar link. Radar Target Extractor (RTX) for radar signal processing can be remotely accessed and controlled on existing PC via the internet, from anywhere, at any time. Results are presented that demonstrate the effectiveness of the newly constructed fisheries monitoring system for conducting continuous surveillance of illegal fishing vessels in the inshore fishing ground. The identification of illegal fishing vessels was achieved by comparing radar positions of illegal fishing vessels exceeding the warning limits in the surveillance area with GPS position reports transmitted from legal fishing vessels, and the illegal fishing vessels were marked with red symbols on the ENC screen of a PC. The methods to track the activities of all vessels intruding or leaving the fishing limit zones also were discussed.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권6호
• /
• pp.440-444
• /
• 2016

In this paper, an equivalent circuit model for near-field noise emission is proposed to implement a multimedia operation-monitoring system for mobile devices. The proposed model includes a magnetic field probe that captures noise emissions from multimedia components, and a transfer function for near-field noise coupling from a transmission line source to a magnetic field probe. The proposed model was empirically verified with transfer function measurements of near-field noise emissions from 10 kHz to 500 MHz. With the proposed model, a magnetic field probe was optimally designed for noise measurement on a camera module and an audio codec in a mobile device. It was demonstrated that the probe successfully captured the near-field noise emissions, depending on the operating conditions of the multimedia components, with enhanced sensitivity from a conventional reference probe.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.562-565
• /
• 2008

Measuring system for piezo inkjet droplet and ink jetting status was developed. In order to measure the jetting performance, two different approaches have been used. One is to use the self-sensing capability of the piezo actuator in the printhead. The other is to use the droplet image from a CCD camera. The software as well as hardware using two approaches was developed. The self-sensing signal as well as meniscus motion was shown to be useful in monitoring jetting conditions. Furthermore, ink properties such as viscosity and speed of sound, which is related to jetting performance, can be understood.

• 정보저장시스템학회논문집
• /
• 제10권1호
• /
• pp.27-31
• /
• 2014

Optical Archive system consists of cartridge, drive and transfer robot. Transfer robot moves disc in cartridge to drive that reads data of disc. Distance between disc in cartridge and transfer robot very short, about 4mm. When disc projects, there is a danger of collision. Collision can cause breakage of disc and breakdown of system. To prevent collision of disc and transfer robot, projection of disc should be detected. In this paper, we proposed error monitoring method of projecting disc in archive data storage using camera. Proposed algorithm is evaluated by experiments with archive system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.900-904
• /
• 2009

The measurement of contact wire uplift in electric railway is one of the most test method to accept the maximum permitted speed of new vehicles or pantographs. The contact wire uplift can be measured for shot periods when pantograph is running in monitoring station. This paper describes the development of two different methods for contact uplift measurement using vision-based system and wireless online monitoring system. Our vision-based system employs a high-speed CMOS (Complementary Metal Oxide Semiconductor) camera with gigabit ethernet LAN. The development of a real-time remote monitoring system that acquires data from any kind of sensor to be transmitted by wireless communication from overhead line and structure at 25 kV to a computer in catenary system. The proposed two kind of different measurement systems to evaluation for dynamic uplift of overhead contact wire shows promising on-field applications for high speed train such as Korea Tilting Train (TTX) and Korea Train eXpress (KTX).

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.1042-1047
• /
• 2005

A web-based camera (webcam) is expected to enhance construction operation monitoring. However, webcams are often installed outside a building because their mobility is limited by cable wiring, which makes it difficult to monitor construction operations inside the building. If a webcam is integrated with emerging wireless communication technologies, construction professionals may be able to monitor interior construction operations using webcams without getting network cables wired on a congested and dynamic construction job site. However, one may concern that wireless communication may not be fast enough to transport all webcam images seamlessly. This paper presents an investigation as to the observation error of webcam images when a limited amount of images are delivered.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.307-313
• /
• 2002

This paper describes a weld pool monitoring technique, which is based on the weld pool image analysis. The proposed image analysis algorithm uses machine vision techniques to extract geometrical information from the weld pool image such as maximum weld pool width, gap width and misalignment between the joint longitudinal axis and the welding wire. These can be related to the welding parameters (welding voltage and current, wire feed speed and standoff) to produce control actions necessary to ensure that the required weld quality will be achieved. The experiments have shown that the algorithm is able to produce good estimates of the weld pool geometry; however, the adjustment of the camera parameters affects the image quality and, consequently, has a great influence over the estimation.

• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.252-259
• /
• 2017

Nowadays, the existing manual method for recording actual progress of the construction site has some drawbacks, such as great reliance on the experience of professional engineers, work-intensive, time consuming and error prone. A method integrating computer vision and BIM(Building Information Modeling) is presented for indoor automatic progress monitoring. The developed method can accurately calculate the engineering quantity of target component in the time-lapse images. Firstly, sample images of on-site target are collected for training the classifier. After the construction images are identified by edge detection and classifier, a voting algorithm based on mathematical geometry and vector operation will divide the target contour. Then, according to the camera calibration principle, the image pixel coordinates are conversed into the real world Coordinate and the real coordinates would be corrected with the help of the geometric information in BIM model. Finally, the actual engineering quantity is calculated.