• Journal of Periodontal and Implant Science
• /
• v.41 no.3
• /
• pp.117-122
• /
• 2011

Purpose: The purpose of the present randomized controlled clinical study was to evaluate the short-term outcomes of micro-current electrical neuromuscular stimulation (MENS) as an adjunct method to nonsurgical periodontal therapy. Methods: Twenty patients with moderate to severe chronic periodontitis were recruited into the study and randomly treated with either nonsurgical periodontal therapy followed by 5 MENS treatments with a micro current device or by nonsurgical periodontal therapy alone. Periodontal parameters were measured at baseline and 6 weeks following therapy, and included the plaque index, bleeding on probing, probing depth, and clinical attachment level (CAL). Results: All measured values were reduced at the time of re-evaluation. The amount of inflammation was significantly reduced in both the test (P=0.002) and control group (P=0.015). The test group demonstrated a significant CAL gain at 6 weeks following therapy, including non-molar (P=0.009) and molar teeth (P=0.028). In comparison with the control group, the test group showed statistically significant differences in the CAL on both molar (P=0.027) and non-molar teeth (P=0.031). Conclusions: In conclusion, the short-term results of the study indicate that MENS could be a suitable adjunctive method in the treatment of chronic periodontitis.

• Imaging Science in Dentistry
• /
• v.39 no.2
• /
• pp.75-79
• /
• 2009

Purpose: To investigate the incidence and prevalence of C-shaped root canal using computed tomographic images of head and neck in Korean population. Materials and Methods : Regardless of each examination purpose, randomly selected 268 examples which have serial axial computed tomographic images with 8 normal molars in maxilla and mandible were selected and investigated. Defined C-shaped root canal and we could get 82 proper image examples in view of this definition. These were detected and investigated of incidence and prevalence of C-shaped root canal. Results: C-shaped root canals were found in 82 examples among 268 (30.6%) and 147 teeth. They were only found on molar area, and the highest incidence was 37.41% of left mandibular second molars, and the lowest was 2.04% of right maxillary second molars. On prevalence of tooth position, mandibular second molar was the highest, 65% of C-shaped root canal teeth and maxillary second molar was 6% the lowest. Conclusion: 31% of randomly selected CT images no considering check-up reason have C-shaped root canals. The C-shaped root canals of mandibular second molar are found most frequently and they are also detectable on maxilla. On Korean population, C-shaped root canals are one of conditions that have to concern with dental treatment for it appears at a high prevalence relatively. (Korean J Oral Maxillofac Radiol 2009; 39: 75-9)

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.136-142
• /
• 2010

Ectopic eruption is defined as the eruption of the tooth in an abnormal position or orientation. In the molar region, ectopic eruption may cause distal root resorption and premature exfoliation of the neighbor teeth and uncontrolled space loss is followed. Prolonged partial impaction of the permanent molar may also cause undetected caries or abscess formation of the neighbor teeth. While 66% of ectopically erupting permanent molars are corrected spontaneously without treatment, the treatment is necessary for the irreversible ectopic eruption cases. The optimal treatment approach depends on a number of factors including the clinical eruption status of the molar, amount of enamel ledge and the mobility of the neighbor tooth, and the presence of pain or infection. This case report presents the results of treatment of the ectopically erupting maxillary first permanent molars and mandibular second molars using elastic separators or modified Halterman appliance with or without surgical approach.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.43 no.2
• /
• pp.100-105
• /
• 2017

Objectives: Localization of the mandibular canal (MC) and measurement of the height and width of the available alveolar bone at the proposed implant site in the posterior segment of the mandible using cone-beam computed tomography (CBCT) in patients with a single missing tooth. Materials and Methods: A cross-sectional study was performed where CBCT scans of the patients with a single missing tooth in the posterior segment of the mandible-premolar, I (1st) molar, and II (2nd) molar were used. The scans were assessed using OnDemand3D software (version 1.0; CyberMed Inc., Seoul, Korea) for localization of the MC asnd remaining alveolar bone both vertically (from the superior position of the MC to the crest of the alveolar ridge) and horizontally (buccolingual, 3 mm below the crest of the alveolar ridge). The findings were statistically analyzed using independent t-test. Results: A total of 120 mandibular sites (40 sites for each of the three missing premolar, I molar, and II molar) from 91 CBCT scans were analyzed. The average heights (from the alveolar crest to the superior margin of the MC) at the premolar, I molar, and II molar areas were $15.19{\pm}2.12mm$, $14.53{\pm}2.34mm$, and $14.21{\pm}2.23mm$, respectively. The average widths, measured 3 mm below the crest of the alveolar ridge, at the premolar, I molar, and II molar areas were $6.22{\pm}1.96mm$, $6.51{\pm}1.75mm$, and $7.60{\pm}2.08mm$, respectively. There was no statistically significant difference between males and females regarding the vertical and horizontal measurements of the alveolar ridges. Conclusion: In the study, the measurements were averaged separately for each of the single missing teeth (premolar, I molar, or II molar), giving more accurate information for dental implant placement.

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.2
• /
• pp.259-271
• /
• 1992

This study was designed to investigate the criteria of the perfect smile that was necessary to improve the esthetic problem in oral and maxillo-facial region and treating the anterior tooth region. The author took the facial straight photograph of 240 university students(male : 129, female : 111) in a resting and a smiling position, measured and analized the lip pattern and the relation between the lip and the teeth when they were smiling. Besides, 10 members of committee for appraisal (dentist : 5 persons, professor of the college of fine arts : 5 persons) estimated the smiling pattern. After that the author have compared and analyzed the obtained results. The results obtained were as follows : 1. In the shape of the upper lip, when the upper lip curved downward, it was 42.92% , straight was 45.00% and curved upward was 12.08%. The group in which the upper lip curved upward was the most esthetic. 2. In the relation between the upper lip and the teeth, high smile was 29.17%, average smile was 55.83% and low smile was 15.00%. The group of average smile was the most esthetic. 3. In the parallel relation between the lower lip and maxillary anterior incisal curvature, the group of paralled was 60.42%, the group of straight was 34.17% and the group of reverse was 5.41%. The group of parallel was the most esthetic. 4. In the relationship between maxillary anterior incisor and lower lip, the group of the maxillary anterior incisor were slightly covered by the lower lip was 10.42%, the group of the maxillary anterior teeth touched to the lower lip was 35.83%, and the no-touching was 53.75%. The group of the maxillary anterior teeth touched to the lower lip was the most esthetic. 5. In the teeth displayed in a smile, displayed to the canine was 0.84%, displayed to the first premolar was 19.17%, displayed to the second premolar was 57.92%, displayed to the first molar was 20.00% and displayed to the second molar was 2.08%. The group of displayed to the first molar was the most esthetic. 6. At smiles, the width of the mouth corner was 0.46 times of the full face width, 0.95 times of the interpupillary distance, and 1.23 times of the resting position. 7. At smiles, the lengh of the upper lip was 0.71 times and lower lip was 0.93 times of the length in the resting position.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.3
• /
• pp.382-388
• /
• 2002

In the present study, crown diameters and their sexual differences in deciduous teeth were investigated in children of Chon-ju city, Korea. Plaster casts of the deciduous dentitions obtained from 50 boys and 50 girls were examined. Mesiodistal and buccolingual crown diameters were measured using a digital caliper(0.01mm) according to the definitions of Seipel and Moorees et al. These measurements were performed three times, and intra-observer measurement errors were calculated by the single determination method. The crown index, module and area were calculated in order to provide a comparison of crown proportions. The results obtained were summarized as follows; 1. The mean values of intra-observer measurement errors were 0.255mm and are unlikely to have influenced the statistical analysis. 2. The mean values of mesiodistal and buccolingual crown diameters examined were larger in boys than girls. 3. The mean coefficient of variation was 5.6 in the deciduous dentition. There were a trend for the primary second molar to be the least variable in size of all teeth both in boys and girls. 4. Fluctuating asymmetry is the difference between left and right antimeres in individuals. Primary second molars were less asymmetrical than primary first molars in both dimensions. 5. In maxillary teeth, Crown index is larger in boys than in girls. In contrast, in mandibular teeth, except primary canine, it is larger in girls than in boys. Crown module is larger in boys than in girls and increased progressively from primary first incisor to primary second molar. Crown area is consistently larger in boys than in girls. The minimum crown area is mandibular primary incisor and maximum crown area is maxillary primary second molar.

• Restorative Dentistry and Endodontics
• /
• v.47 no.2
• /
• pp.24.1-24.15
• /
• 2022

Objectives: Regenerative endodontic treatment is a clinical procedure aimed at biologically regenerating damaged root canal tissue of immature permanent teeth. This study aimed to report the outcomes of regenerative endodontic treatment performed by endodontic postgraduate students. Materials and Methods: Clinical and radiographic data of 27 patients, aged 10-22 years, who underwent regenerative treatment of immature permanent teeth from 2015 to 2019 were followed up, wherein clinical and radiographic examinations were performed for each patient. Postoperative success rate and tooth survival were analyzed, and the postoperative radiographic root area changes were quantified. Results: A total of 23 patients attended the dental appointments, showing that all teeth survived and were asymptomatic. Specifically, 7 periapical pathosis cases were completely healed, 12 were incompletely healed, and 4 cases failed. Moreover, significant differences were found between discolored and non-discolored teeth, and between the presence or absence of periapical radiolucency. Additionally, 3 anterior teeth showed complete closure of the apical foramen, while the apical foramen width was reduced in 17 teeth and failed in 3 teeth. Root length was also found to have been increased in 7 anterior and 4 posterior teeth, and the average length ranged from 4.00-0.63 mm in the anterior teeth, 2.85-1.48 mm of the mesial root, and 2.73-2.16 mm of the molar teeth distal root. Furthermore, calcified tissue deposition was observed in 7 teeth. Conclusions: A favorable outcome of regenerative endodontic treatment of immature permanent teeth with necrotic pulp was achieved with a high survival rate.

• Journal of Technologic Dentistry
• /
• v.42 no.3
• /
• pp.202-207
• /
• 2020

Purpose: This study is a comparative analysis of the strain according to deposition in a constant temperature water bath after manufacturing ultraviolet (UV)-cured artificial teeth. Methods: As a control group, 10 ready-made artificial teeth were selected as the first molar on the right side of the maxilla (RT group). Silicone was used as a duplicate of the artificial denture teeth. Experimental teeth were prepared in two groups using the prepared silicone mold. In the first experimental group, the UV-cured resin was injected into the negative silicone, followed by irradiation with a UV-curing machine for 5 minutes (5M group). In the second experimental group, the UV-cured resin was injected into the negative silicone, and then irradiated for 30 minutes using a UV-curing machine (30M group). The one-way ANOVA was performed, and post-test was analyzed by Tukey. Results: When immersed in a water bath for 15 days, it was found to be -0.3% in the RT group, -0.6% in the 5M group, and -0.7% in the 30M group. The results revealed -0.2% in the RT group, 0.2% in the 5M group, and -0.2% in the 30M group when they were in the bath for 30 days. Conclusion: In the water bath, the swelling was greater when deposited for 1 to 15 days, but was less when deposited for 15 to 30 days.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.8 no.1
• /
• pp.103-117
• /
• 1981

The data about dental caries obtained from 1438 preschool children (male 797, female 641) in Seoul aged from 3 to 6 were analyzed by their sexes, ages, jaws and teeth surfaces. The results were as follows. 1. dmf rate : 92.63% 2. dmft index : 6.06 dmft rate 30.81 % dmfs index : 11.82 dmfs rate 12.02 % 3. d,m & f rate d rate: 79.45% m rate: 8.15% f rate : 12.40 % 4. dft index : 5.94 5. The order of caries susceptible tooth 1. Lower deciduous 2nd molar 2. Lower deciduous 1st molar 3. Upper deciduous 2nd molar 4. Upper deciduous lateral incisor 5. Upper deciduous cental incisor 6. Upper deciduous lateral incisor 7. Lower deciduous canine 8. Upper deciduous canine 9. Lower deciduous central incisor 10. Lower deciduous lateral incisor 6. Predilection sites of each tooth A) Deciduous central incisor ; Max. : Mesial cavity Mand. : Mesio-distal cavity B) Decidous lateral incisor ; Max. : Mesial cavity Mand. : Distal cavity=Mesial cavity C) Deciduous canine; Max. : Labial cavity Mand. : Distal cavity D) Decidous 1st molar ; Max. : Disto-occlusal cavity Mand.: Disto-occlusal cavity E) Deciduous 2nd molar ; Max. : Linguo-occlusal cavity Mand.: Occlusal cavity 7. All the values in caries criteria in 1981 were somewhat lower than in 1968, but m & f rate were increased.

• The korean journal of orthodontics
• /
• v.45 no.2
• /
• pp.82-88
• /
• 2015

Objective: The aim of this study was to evaluate the reliability of measurements obtained after the superimposition of three-dimensional (3D) digital models by comparing them with those obtained from lateral cephalometric radiographs and photocopies of plaster models for the evaluation of upper molar distalization. Methods: Data were collected from plaster models and lateral cephalometric radiographs of 20 Class II patients whose maxillary first molars were distalized with an intraoral distalizer. The posterior movements of the maxillary first molars were evaluated using lateral cephalometric radiographs (group CP), photocopies of plaster models (group PH), and digitized 3D models (group TD). Additionally, distalization and expansion of the other teeth and the degrees of molar rotation were measured in group PH and group TD and compared between the two groups. Results: No significant difference was observed regarding the amount of molar distalization among the three groups. A comparison of the aforementioned parameters between group PH and group TD did not reveal any significant difference. Conclusions: 3D digital models are reliable to assess the results of upper molar distalization and can be considered a valid alternative to conventional measurement methods.