• Magazine of the Korean Society of Agricultural Engineers
• /
• v.23 no.4
• /
• pp.53-59
• /
• 1981

This experiment was carried out to find out the effectiveness of soil cement stabilization about the Song-I in Cheju province. The results are summarized as follows; 1.The increasing ratio of unconfined compressive strength according to the increment of cement content was markedly low compared with the weathered granite soil, so the effect of stabilization was low. 2.The moisture content of the sample of Song-I indicates the maximum unconfined compressive strength showed at the 5% or so of dry side than the optimum moisture content and the change of the unconfined compressive strength according to the change of moisture content was not sensitive compared with the weathered granite soil. 3.Generally the primary strength of curing age within 7 days of the sulfate resisting cement was low compared with the normal portland cement and the strength of 28 curing days showed a similar tendency, especially in case of Song-I, and it seemed that the sulfate resisting cement was a little more effective than the normal portland cement. 4.As the unconfined compressive strength of grain size controlled Song-I was low compared with the weathered granite soil, so the rate of weight loss by the durability test was great, therefore it was thought that the durability was weak.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.354-360
• /
• 2020

This study examined the factors for sorting miscellaneous cereal crops using a rice-sorting device by analyzing the physical characteristics according to the moisture content. The initial moisture contents of miscellaneous cereal were 16.3, 19.8, and 16.5%, respectively. The samples were used in the experiment after drying to five levels. The width, length, and area of the samples increased with increasing moisture content except for the roundness, and all the prediction models were developed with a first-order linear equation. The bulk density of Italian millet and sorghum increased with increasing moisture content, whereas the bulk density of common millet was unaffected by the change in moisture content. The terminal velocity of the samples increased with increasing moisture content, and a first-order linear equation was used to develop the prediction models. The measured physical properties of the miscellaneous cereal crops based on the changes in the moisture content could be expressed using a first-order experimental model equation. Therefore, the rice-sorting device could be applied to the terminal velocity, but the other device applying the geometrical characteristics and bulk density was required to change the design of the process depending on the type of grain.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.4
• /
• pp.270-275
• /
• 2022

Livestock production costs are heavily influenced by the cost of feed, The use of domestically grown forages is more desirable for livestock feed production. As part of this study, triticale, which is an extremely palatable and easily cultivable crop in Korea, was used to produce low moisture silage bales with lactic acid bacteria (LAB) and then stored for different periods. We examined the nutrient content of silage, such as crude protein (CP), acid detergent fiber (ADF) and neutral detergent fiber (NDF), as well as their organic acids, including lactic acid, acetic acid, butyric acid, at different storage periods. The nutrient content of silages, such as crude protein, ADF, and NDF, did not change significantly throughout storage periods. Organic acid data indicated that lactic acid concentrations increased with increasing moisture contents and storage periods up to nine months. However, further extending storage to 12 months resulted in a reduction in the lactic acid content of all silages as well as an increase in their pH. Based on the present results, it suggested that the production of low moisture silage with the LAB may be able to preserve and maintain its quality without altering its nutritional composition. Also, the lactate content of the silage remained significant for at least nine months.

• Journal of Biosystems Engineering
• /
• v.11 no.2
• /
• pp.14-22
• /
• 1986

This study was carried out to find a method which can be used to measure the soil moisture content of the soil bin exactly and quickly. And gypsum block is used as an instrument in measuring soil moisture content in the field of green house farming, etc.. However the characteristics of gypsum block, or the guide line of making gypsum block is not well introduced in Korea. So the information about gypsum block such as the density of gypsum, type of electrode, dimension of electrode, distance between electrodes, density of surrounding soil were included in this study and their effects on the relationship between soil moisture content and electrical resistance were investigated. The results of this study are as follows; 1. The grid type electrode was quicker in accessing the equilibrium condition and showed more sensitive response to the change of soil moisture content than the plate type electrode. 2. The longer the distance between the electrodes, the larger the electrical resistance, and the distance of 3 to 5 mm was recommended. 3. The larger the width of the electrode, the smaller the electrical resistance. However, there was no significance between the levels designed in this study. Considering the size of the gypsum block itself, the adaptible range of width may be 4 to 8 mm. 4. The higher the density of gypsum, the smaller the electrical resistance. And the block of lower density was broken down in the soil of higy moisture content. The optimum ratio of gypsum to water was 7:5. 5. The measuring system used in this study allowed simultaneous, multi-data acquisition. So this system using A/D converter can be applied to the measurement of soil moisture content of soil bin.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.8
• /
• pp.571-575
• /
• 2018

The moisture content of a coffee bean affects its permittivity, and changing the moisture content of a coffee bean changes the taste of the coffee. The variation in the moisture content of a coffee bean can be predicted by the change in frequency and reflection coefficient values with respect to the variation in the permittivity of the bean when it is placed on a patch antenna. In this study, a dual-band patch antenna is designed, which has a moisture measurement band of 3.8~4 GHz that can measure the moisture level of a material; the antenna has a Wi-Fi transmit and receive band of 2.45 GHz. Through simulations and measurements, this study proved that the level of return losses changed from 3.6 to 4 GHz when the moisture content of a coffee bean changed from 2 to 15%. The moisture levels of rice and other beans can be measured with the designed antenna, which can be applied to various applications.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.6
• /
• pp.9-13
• /
• 2002

This study has been performed to investigate the physical and mechanical characteristics of compaction, volume change and compressive strength for reinforced soil mixed with cement. And confirm the reinforcing effects with admixture such as cement. To this end, a series of compaction test and compression test was conducted for clayey soil(CL) and cement reinforced soil. In order to determine proper moisture content and mixing ratio, pilot test was carried out for soil and cement reinforced soil. And the mixing ratio of cement admixture was fixed 3%, 6%, 9% and 12% by the weight of dry soil. As the experimental results, the maximum dry unit weight(${\gamma}_{dmax}$) was increased with the mixing ratio and then shown the peak at 10% reinforced soil, but the optimum moisture content(OMC) and the volume change was decreased with the ratio increase. And the compressive strength volume change was decreased with mixing ratio increased.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.04a
• /
• pp.544-550
• /
• 1997

In this study, the advanced on-sided stress wave velocity measurement method was applied to investigate the effects of composition, age and moisture content in concrete. Two concrete specimens that have different composition were used to figure out the change of the Longitudinal and Surface wave velocity due to different composition. The other concrete specimen was cast and the Longitudinal and Surface wave velocity was monitored during curing process. After 28-day old, the effect of moisture content in the concrete specimen to the stress wave velocity is presented in this paper during the time period 43-74 days after casting. For drying process. an aggregate drying oven was used. A conventional ultrasonic through transmission method was used to compare with the results determined by the one-sided method.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.29-30
• /
• 2022

The unit-water content has a very significant effect on the durability of the construction structure and the quality of concrete. Although there are various methods for measuring the unit-water content, there are problems of time required for measurement, precision, and reproducibility. Recently, there is an FDR sensor capable of measuring moisture content in real time through an apparent dielectric constant change of electromagnetic waves. In addition, various artificial intelligence techniques that can non-linearly supplement the accuracy of FDR sensors are being studied. In this study, the accuracy of unit-water content measurement was compared and evaluated using machine learning and deep learning techniques after normalizing the data secured in concrete using frequency domain reflectometry (FDR) sensors used to measure soil moisture at home and abroad. The result of comparing the accuracy of machine learning and deep learning is judged to be excellent in the accuracy of deep learning, which can well express the nonlinear relationship between FDR sensor data and concrete unit-water content.

• Journal of the Korean Chemical Society
• /
• v.54 no.5
• /
• pp.594-602
• /
• 2010

Since the requirement of the high density integration and thin package technique of semiconductor have been increasing, the main package type of semiconductor will be a chip scale package (CSP). The changes of diffusion coefficient and moisture content ratio of epoxy resin systems according to the change of liquid type epoxy resin and fillers for CSP applications were investigated. The epoxy resins used in this study are RE-304S, RE310S, and HP-4032D, and Kayahard MCD as hardener and 2-methylimidazole as catalyst were used in these epoxy resin systems. The micro-sized and nano-sized spherical type fused silica as filler were used in order to study the moisture absorption properties of these epoxy molding compound (EMC) according to the change of filler size. The temperature of glass transition (Tg) of these EMC was measured using Dynamic Scanning Calorimeter (DSC), and the moisture absorption properties of these EMC according to the change of time were observed at $85^{\circ}C$ and 85% relative humidity condition using a thermo-hygrostat. The diffusion coefficients in these EMC were calculated in terms of modified Crank equation based on Ficks' law. An increase of diffusion coefficient and maximum moisture absorption ratio with Tg in these systems without filler can be observed, which are attributed to the increase of free volume with Tg. In the EMC with filler, the changes of Tg and maximum moisture absorption ratio with the filler content can be hardly observed, however, the diffusion coefficients of these systems with filler content show the outstanding changes according to the filler size. The diffusion via free volume is dominant in the EMC with micro-sized filler; however, the diffusion with the interaction of absorption according the increase of the filler surface area is dominant in the EMC with nano-sized filler.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.6
• /
• pp.540-544
• /
• 1991

Pod dehiscence in six rape varieties drying after harvest in the field was investigated with use of strain gauge. The development of rape pods was observed after 3-4 days of flowering. The length of pod and seed reached of their maximal size at the 20th and 35th days after flowering, respectively. The seed shape was nearly spherical 40 days after flowering, and pod width was maximal at the 45th days of flowering. Moisture content of seeds was 70% at cutting time, reduced to 30% at 5 days of drying in the plastic film house and 10% at 14 days. Pod dehiscence showed a diurnal change with moisture content of pods and relative humidity, and the dehiscence became difficult under low moisture content of pods and relative humidity of which seems to be related to the rapid drying condition of pod.