• Computers and Concrete
• /
• v.33 no.5
• /
• pp.573-594
• /
• 2024

This article presents a research study, with both laboratory and field tests, of a deep foundation in a markedly anisotropic medium. Particularly it has focused on the evaluation of the behavior of a pile, one meter in diameter, embedded in a rocky environment with difficult conditions, in the Flysch of the Spanish city of San Sebastián. To carry out the research, the site of a bridge over the Urumea River was chosen, which was supported by pre-excavated reinforced concrete piles. 4 borings were carried out, by the rotation and washing method, with continuous sampling and combined with flexible dilatometer tests. In the field, an Osterberg load test (O-cell) was performed, while in the laboratory, determinations of natural moisture, natural unit weight, uniaxial compressive strength (UCS), point load strength (PLS), compressive wave propagation velocity (V_c) and also triaxial and direct shear tests were carried out. The research results indicate the following: a) the empirical functions that correlate the UCS with the PLS are not always linear; b) for the studied Flysch it is possible to obtain empirical functions that correlate the UCS with the PLS and with the V_c; c) the bearing capacity of the studied Flysch is much greater than if it is evaluated by different load capacity theories; d) it is possible to propose an empirical function that allows evaluating the mobilized shear strength (τ_m), as a function of the UCS and the displacement relative of the pile (δ_r).

• Journal of Bio-Environment Control
• /
• v.10 no.2
• /
• pp.88-94
• /
• 2001

Physical and chemical properties, the salt accumulation and leaching of salt by water of coal fly ash ball (ash ball) were evaluated in comparison with perlite and granule rockwool (rockwool). Bulk density, particle density, solid phase, and porosity of ash ball were 0.93 g.cm$^{-3}$ , 2.29 g.cm$^{-3}$ , 40.6%, 59.4%, respectively. The bulk density of ash ball was greater, while porosity was smaller, than that of perlite and rockwool. Saturation moisture capacity was 52% in ash ball, 71% in perlite, and 90% in rockwool. Water contents after drainage for 1 hr of ash ball, perlite, and rockwool were 21%, 27%, and 80%, respectively. Water content of small granules (3-5 mm) of ash ball was 5% greater than that of large (7-15 mm) grannules. The ash ball was a weak alkali substrate with pH 7.6, but not electric conductivity (EC), of the nutrient solution supplied to ash ball slightly increased. When the absorption of mineral ions to substrates were analyzed, ash ball and RW absorbed mainly PO￣$_4$. On tomato culture, salt accumulation in ash ball substrate was similar to that in perlite. Most of the salts in the ash balls were removed by submerging the substrate eight times in distilled water. It is concluded that water holding capacity of ash ball substrate was lo as compared to other substrates, but air permeability, and water diffusion was excellent, making control of medium water content easy.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.2
• /
• pp.152-161
• /
• 1985

To examine the effects of different levels of soil moisture on dry matter production and chemical compositions of sorghum cv. Pioneer 931, sorghum-sudangrass hybrid cv. Pioneer 988, sudangrass cv. Piper, and corn cv. Suweon 19. Soil moisture contents were maintained with approximately 100, 80 and 40% of field moisture capacity. The results are summarized as follows; 1. The highest dry matter yields per plant were found at 60% soil moisture level with 176.2g, 180.8g and 164.0g for pioneer 931, Pioneer 988 and corn, respectively. 2. Dry matter accumulation in accordance with soil moisture levels and growth stages of all crops except sudangrass were in the order of 60>40>80>100% soil moisture level. 3. The highest absolute growth rate (AGR) of sorghum, sorghum-sudangrass hybrid and corn was shown at 60% soil moisture level, that of sudangrass was shown at 80% soil moisture level. The relative growth rate (RGR) of all crops was high in the early growing stage and was low at maturity. The highest net assimilation rate (NAR) of all crops was found at 60% soil moisture level with $72-467g/m^2/day$ from June 29 to July 5. 4. The higher crude fiber content in leaf of Pioneer 931 was shown at 100% and 80% soil moisture levels with 28.6-28.8%, that of corn had no significant difference among soil moisture levels. The crude protein content in leaf of all crops was 14.2-21.6% at 60% soil moisture level, 13.8-16.0% at 40% soil moisture level, and 7.3-13.9% at above 80% soil moisture levels, respectively. 5. The crude fiber content in stern of all crops and all soil moisture levels was 24.6-36.7%, and the crude protein content in stem was 2.5-5.3% in dry matter basis.

• Journal of Korea Soil Environment Society
• /
• v.3 no.2
• /
• pp.61-70
• /
• 1998

This research has been made for influence of forest environmental changes, such as tree-clearcutting affecting to soil chemical and physical properties, on water storage capacity at forest fire land in Keumsan, Chungnam. The analyzed factors were bulk density, porosity, field moisture saturated hydraulic conductivity air permeability and organic matter content, Field moisture saturated hydraulic conductivity and air permeability at uncutting sites were higher than those at clearcutting sites, especially the most differences were appeared at lower slope. After 2 years passed since forest fire, the most changeable parts of soil characteristics were 5-l5cm depth below soil surface. Total Porosity, coarse pore and fine pore at uncutting sites were higher than those at clearcutting sites. Also, as soil depth increased, total porosity and coarse pore were decreased. Bulk density at uncutting sites was lower than that at clearcutting sites, and was decreased as soil depth increased. The order of the change trend in field moisture saturated hydraulic conductivity, air permeability and porosity was slope lower>middle>upper. Organic matter content at uncutting sites were higher than those at clearcutting sites, and decreased as soil depth increased. As soil depth increased, bulk density had the positive correlation, in other hand, porosity, coarse pore, field moisture saturated hydraulic conductivity, air permeability and organic matter content had the negative correlation. It was concluded that forest environmental changes by forest fire degrade soil physical and chemical properties.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.4
• /
• pp.271-279
• /
• 2013

Water-soluble collagen (30 wt%) was entrapped within oil phase of lipstick using reversed micelle method to improve the moisture capacity of the lipstick. Reversed micelles containing collagen were prepared using caprylic/capric triglyceride as external phase and polyoxyethylene (10) octylphenyl ether (Triton X-100) and 1-dodecanol as surfactant and co-surfactant, respectively. The formation of reversed micelle encapsulating collagen was confirmed by measuring electric conductivity and UV-vis spectrum using methylene blue (MB). The stability and moisture capacity of the lipstick containing 20 wt% collagen encapsulated reversed micelles were observed by measuring rheology property, moisture content and amino acid content. The molecular ratio (W, water-pool) of water to surfactant (Triton X-100) in the most stable reversed micelle was ${\leq}$ 10. The hardness of the lipstick had no difference with that of the lipstick without reversed micelle, and the moisture content was increased to 59% and the amino acid content was 92.7%.

• Korean Journal of Food Science and Technology
• /
• v.28 no.1
• /
• pp.169-178
• /
• 1996

Target parameters such as water solubility index (WSI), intrinsic viscosity (IV), water holding capacity (WHC), oil holding capacity (OHC), soluble dietary fiber (SDF) and microstructure were investigated on three different screw configurations during twin-screw extrusion of wheat bran. WSI of raw wheat bran (RWB) was 13.7%, while that of extrudates ranged $16.3{\sim}23.2%$ when extruded using screw configurations with 5 reverse screw elements (RSE). It was found that the moisture content of RWB greatly affected WSI of extrudates. IV of wheat bran extrudates increased from 10.6 ml/g of RWB to $37.86{\sim}44.37\;ml/g$ of extrudates extruded using 3, 4 and 5 RSE, whose trend was highly related to the moisture content of RWB and the extrusion pressure. Multiplication of IV and soluble solid (SS) content exhibited good correlation $(R^2=0.85)$ with specific mechanical energy (SME). The results suggested that SS and molecular size are an important factor governed by the SME in solubilization of wheat bran. WHC increased with increasing feed rate and moisture content, while OHC decreased. SDF increased from 2.68% of RWB to $4.32{\sim}6.48%$ of extruded wheat bran, indicating the significant breakdown of cell wall components. Microstructure of the extrudates showed the distinct patterns of degradation and solubilization of cell wall structure, depending on the moisture content of RWB.

• Korean Journal of Environment and Ecology
• /
• v.36 no.4
• /
• pp.422-432
• /
• 2022

Soil and micro-climatic environmental monitoring was conducted to evaluate the factors causing tree growth impediments at the Baekdudaegan ecological axis restoration project site. As a result, it was found that the nutrient supply was insufficient in the restoration project site due to the lack of organic matter, total nitrogen and cation exchange capacity of the soil compared to the surrounding forest. After the completion of the restoration, the soil moisture in the autumn decreased more than 7 times faster than that of the surrounding forest, and it was evaluated that the soil moisture was significantly low due to the lack of silt and clay content. In the case of the restoration site, the annual potential evapotranspiration was analyzed to be 975mm, which is approximately two times higher than that of the surrounding forest. The soil moisture of the restoration site in the summer decreased rapidly during the daytime when the amount of insolation increased and this was found to be strongly influenced by the increase in potential evapotranspiration. In order to improve the above factors affecting the tree growth at the Baekdudaegan ecological axis restoration project site, it is necessary to induce the smooth supply of nutrients and water to plants by improving physical proprieties and cation exchange capacity, i.e., using litterfall, humus soil, soil conditioner and organic fertilizer. The results of this study are expected to serve as basic data for the design, construction, and management of ecological axis restoration projects in the future.

• Animal Bioscience
• /
• v.37 no.7
• /
• pp.1204-1212
• /
• 2024

Objective: This study evaluated the effects of high moisture ear corn (HMEC) on production performance, milk fatty acid composition, serum antioxidant status, and immunity in primiparous dairy cows. Methods: A total of 45 healthy primiparous Holstein cows (36.50±4.30 kg of milk/d, 201±9.00 lactating days in milk) were sorted into 3 groups: control group (CG, n = 15); 50% HMEC (replacing 50% steam-flaked corn with HMEC, n = 15); and 100% HMEC (replacing steam-flaked corn with HMEC, n = 15) on an equal dry matter (DM) basis. The study consisted of adaptation period of 14 days, followed by a formal period of 60 days. Feed intake and milk yield were recorded daily. Milk and blood samples were collected on 1, 30, and 60 d of the experimental period. Results: The 50% HMEC group and 100% HMEC group significantly increased (p<0.05) milk yield and DM intake in dairy cows compared to the control group (CG). The 100% HMEC group showed an increase (p<0.05) in 4% fat-corrected milk (4% FCM). Both the 50% HMEC group and 100% HMEC group exhibited significant decreases (p<0.05) in the content of C10:0, C12:0, and C14:0 fatty acids, along with a significant increase (p<0.05) in cis-9C18:1 content. The saturated fatty acid content was significantly lower (p<0.05) in the 50% HMEC and 100% HMEC groups than that of CG. Conversely, the monounsaturated fatty acid content was higher (p<0.05) in the 50% HMEC and 100% HMEC groups than that in CG. Notably, the 100% HMEC group significantly increased (p<0.05) the serum superoxide dismutase and glutathione peroxidase content, while also decreasing the serum malondialdehyde content (p<0.05). Moreover, the 100% HMEC group significantly increased (p<0.05) the content of immunoglobulin G (IgG) and IgM. Conclusion: High moisture ear corn could improve production performance and milk fatty acid levels and enhance immunity and antioxidant capacity in dairy cows. These results lay the foundation for the wider application of HMEC in ruminant animal diets.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.5 no.2
• /
• pp.175-182
• /
• 2002

A new high yielding mulberry genotype, Victory-1 (V-1) was recommended to the field for irrigated areas by Central Sericultural Research and Training Institute (CSRTI), Mysore during 1996-1997. As K-2 and S-36 mulberry genotypes are already in the field, a study on the comparative performance of V-1, 5-36 and K-2 varieties, in terms of leaf yield, yield attributes, leaf moisture and moisture retaining capacity and their impact on silkworm rearing was carried out under Telangana conditions of Andhra Pradesh during 1999-2001. Among the three genotypes the leaf yield was found to be significantly (P < 0.01) higher in V-1 (64,130 kg/ha/yr) followed by S-36 (44,064 kg/ha/yr) and K-2 (23,990 kg/ha/yr). The maximum leaf moisture was also observed in V-1 (71.84%) compared to S-36 (66.86%) and K-2 (64%). The moisture retaining ability was more in V-1 (70.17%) followed by S-36 (66.20%) and K-2 (60.08%). The yield attributes were found to be significantly (P < 0.01) enhanced in V-1 over S-36 and K-2. Silkworm rearing results (bioassay) indicated a significant (P < 0.01) reduction in larval duration and improvement in larval weight, effective rate of rearing by number and weight, single cocoon and shell weights and shell ratio in the silkworm lots fed on V-1 variety followed by S-36 and K-2. Hence, in this study, V-1 was found to be superior among the three varieties studied.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.5
• /
• pp.856-865
• /
• 2020

Objective: This study was conducted to evaluate the physicochemical properties and changes in moisture concentrations of bedding materials under the conditions of rearing Korean Hanwoo cows. Methods: Two experiments were conducted to investigate the physicochemical characteristics (Exp. I) and usefulness as beddings for rearing cattle (Exp. II) by the type of beddings such as sawdust (SD), wood shavings (WS) and sawdust+wood shavings (S+W; 1:1 in volume), and the species of pine trees from different countries of origins (China, Pinus armandii, AR; Vietnam, Pinus kesiya, KE; USA, Pinus rigida, RI). Results: In Exp. I, SD-AR showed the largest proportion (78.3%) of fine particles (250 ㎛+below 250 ㎛) and the highest bulk density (208 kg/㎥) among treatments (p<0.05). The water absorption capacity at 24 h of both S+W-RI (713%) and -KE (701%) was the highest among treatments (p<0.05) and higher than those of SD or WS alone within each species of pine tree (p<0.05). Moisture evaporation rates (%) at 12 h were ranged from 52.3 to 60.8 for SD, 69.9 to 74.4 for WS, and 72.3 to 73.5 for S+W. Total amounts (mg/㎡) of ammonia emissions were the lowest (p<0.05) in KE species among the pine species within each type of bedding material, having higher ability of ammonia absorption. In Exp II, KE species in both side A and B had lower moisture concentrations (%) than other species. Regardless of types of beddings except SD-AR, moisture concentrations of beddings within a pen were higher (p<0.01) at side A than B. Conclusion: The KE species has better physical characteristics than other beddings and more useful for rearing Hanwoo cattle than other beddings, probably caused by the differences in the method and degree of wood processing rather than the species.