• Journal of the Korean Geotechnical Society
• /
• v.35 no.1
• /
• pp.5-15
• /
• 2019

In this study, the in situ deformation moduli, which were measured by borehole loading tests at basaltic rock masses located in the northeastern onshore and offshore and the northwestern onshore of Jeju Island, were examined in relation to RQD and RMR. The measured deformation moduli were also compared with the estimated deformation moduli from conventional empirical formulas using RQD and RMR. In addition, the measured deformation moduli were analyzed with respect to both the velocity ratio ($V_P/V_S$) and dynamic Poisson's ratio, which were obtained from the elastic wave velocities measured by velocity logging tests. As results, with only RQD, it was inappropriate to evaluate the quality of the Jeju island basaltic rock masses, which are characterized by vesicular structures, to select a measurement method of in situ deformation moduli, and to estimate the deformation moduli. On the other hand, it was desirable to evaluate the quality of the Jeju Island basaltic rock masses, and to estimate the deformation moduli by using RMR. The conventional empirical formulas using RMR overestimated the deformation moduli of the Jeju Island basaltic rock masses. There was qualitative consistency in the relation between velocity ratio and deformation moduli. To estimate appropriately the deformation moduli of the Jeju Island basaltic rock masses, empirical formulas were proposed as the function of RMR and velocity ratio, respectively.

• Korean Journal of Materials Research
• /
• v.8 no.10
• /
• pp.905-911
• /
• 1998

Damping is a property for materials and systems to dissipate energy during periodic deformations. Generally, damping causes stiff decrease in amplitudes and shifts in phases. Also, even at resonance, amplitudes are substantially attenuated. This phenomenon of damping helps in reducing stresses developed during vibrations and consequently improves fatigue lives of materials. In this work internal damping and complex moduli are experimentally determined. An impulse technique is utilized in experiments and cantilever beams are selected as test subjects for the measurements of flextural vibrations since the beams lend themselves easily as simplistic ideal models. A resonance method is employed to determine resonance frequencies which are utilized to compute storage moduli. Also, loss moduli are evaluated from damping capacities and storage moduli. The storage and loss moduli combined yield complex moduli. Finally internal damping is evaluated from bandwidth technique, the real component of the transfer function.

• Geotechnical Engineering
• /
• v.3 no.1
• /
• pp.53-64
• /
• 1987

Dynaflect is known as a very effective equipment for the structural evaluation and rehabilitation of Pavements. It is increasingly used in the design, construction and maintenance of the various pavement structures. In this study, two-layered asphalt concrete pavements with the various moduli and thicknesses are selected as the analytical models. The deflections on the surface corresponding to sensor positions of Dynaflect are analyzed utilizing the multi-layered elastic computer program. From the study of the characteristics of spreadability (SPR), it is found that the SPRs are unique when the moduli ratio of pavements EIIE2 are identical. It is also found that the SPR has a linear relationship with the logarithm of moduli ratio ElIE2 in the range of 1.0 to 50. The regression equation to predict the moduli ratio ElyE2 from the SPR and the pavement taickness h is proposed. A series of charts to estimate the elastic moduli of two-layered asphalt concrete pavement system are also developed.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.8
• /
• pp.65-78
• /
• 2012

Elastic moduli and behavioral characteristics changes of very widely according to stress level resulting from uniaxial compressive test of sedimentary rock. This means that elastic moduli do not indicate constants but variables. More appropriate and reasonable outcome will be accepted through loading-reloading test in design and construction progress. An attention for behavioral characteristics of elastic moduli shown in low level of stress should be paid.

• Journal of the Korean Mathematical Society
• /
• v.42 no.6
• /
• pp.1279-1285
• /
• 2005

Here we generalize previous work by Eisenbud-Harris and Farkas in order to prove that certain Brill-Noether divisors on the moduli space of curves have distinct supports. From this fact we deduce non-trivial regularity results for a higher co dimensional Brill-Noether locus and for the general $\frac{g+1}{2}$-gonal curve of odd genusg.

• Journal of the Korean Mathematical Society
• /
• v.43 no.5
• /
• pp.1065-1080
• /
• 2006

For 3-dimensional Bieberbach groups, we study the de-formation spaces in the group of isometries of $R^3$. First we calculate the discrete representation spaces and the automorphism groups. Then for each of these Bieberbach groups, we give complete descriptions of $Teichm\ddot{u}ller$ spaces, Chabauty spaces, and moduli spaces.

• Journal of applied mathematics & informatics
• /
• v.33 no.3_4
• /
• pp.351-363
• /
• 2015

In this paper, we investigate existence of solutions to a class of quadratic integral equation of Fredholm type in the space of functions with tempered moduli of continuity. Two numerical examples are given to illustrate our results.

• Journal of the Korean Mathematical Society
• /
• v.54 no.6
• /
• pp.1759-1786
• /
• 2017

We examine the moduli space of oriented locally homogeneous manifolds of Type ${\mathcal{A}}$ which have non-degenerate symmetric Ricci tensor both in the setting of manifolds with torsion and also in the torsion free setting where the dimension is at least 3. These exhibit phenomena that is very different than in the case of surfaces. In dimension 3, we determine all the possible symmetry groups in the torsion free setting.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.04a
• /
• pp.383-391
• /
• 1997

The prediction of effective properties of heterogeneous material like concrete is of primary importance in design or analysis. This paper os about micromechanice-based evaluation of elastic moduli of concretes considering composite material behavior. In this study, micromechanixe-based schemes for the effective elastic modui of the lightweight foamed concrete and the normal concrete are proposed based on averaging techniques using a single-layered inclusion model and a multi-phase and multi-layered inclusion model. respectively, For the verification's sake, elastic moduli evaluated in this study are compared with experimental data and results by existing formula.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1998.10a
• /
• pp.353-360
• /
• 1998

Dynamic measurements are used rather sparingly to determine the elastic moduli of rock cores and modulus values are not much utilized in design practice. The reason seems to result from the general perception that values obtained by dynamic measurement are much higher (about 10 times) than those determined statically. This paper presents results from dynamic and static tests on rock cores. The findings are : 1) elastic moduli can be consistently determined by laboratory seismic testing. 2) nonlear deformation characteristic of rock cores was tentatively proposed with variation in elastic modulus with strain.