• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.5
• /
• pp.400-408
• /
• 2007

In this paper, development of the 8kW parallel module converter is presented. For a effective configuration of FB-PWM converter, this paper proposes 4-parallel operation of 2 kw-module. FB converter of 2-kW module is controlled by phase shut PWM and in order to achieve ZVZCS, the simple auxiliary circuit is applied in secondary side. In order to achieve ZCS, control logic for auxiliary circuit operation is designed to reset the primary current during free-wheeling period. For output current sharing of 4-modules, the charge control is employed. The charge control logic is designed with phase shift PWM logic. Voltage controller is implemented by using DSP(TMS320LF2406) with A/D conversion data of the output current and voltage of each module. The developed converter is installed in PCU(Power Conditioning Unit) for HSG(High Speed Generator) in a vehicle and health monitoring system is implemented for vehicle operation test. Finally, performance of the developed converter is proved under practical operation of HSG.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.4
• /
• pp.360-368
• /
• 2017

This paper proposes the 80-kW high-efficiency bidirectional hybrid SiC boost/buck converter using droop control for DC nano-grid. The proposed converter consists of four 20-kW modules to achieve fault tolerance, ease of thermal management, and reduced component stress. Each module is constructed as a cascaded structure of the two basic bi-directional converters, namely, interleaved boost and buck converters. A six-pack hybrid SiC intelligent power module (IPM) suitable for the proposed cascaded structure is adopted for high-efficiency and compactness. The proposed converter with hybrid switching method reduces the switching loss by minimizing switching of insulated gate bipolar transistor (IGBT). Each module control achieves smooth transfer from buck to boost operation and vice versa, since current controller switchover is not necessary. Furthermore, the proposed parallel control using DC droop with secondary control, enhances the current sharing accuracy while well regulating the DC bus voltage. A 20-kW prototype of the proposed converter has been developed and verified with experiments and indicates a 99.3% maximum efficiency and 98.8% rated efficiency.

• Convergence Security Journal
• /
• v.19 no.2
• /
• pp.83-89
• /
• 2019

In accordance with information security compliance and security regulations, there is a need to develop regular and real-time concepts for cyber-infringement attacks against network system vulnerabilities in branch and periodic forms. Vulnerability Analysis Analysis It is judged that it will be a countermeasure against new hacking attack in case of concept validation by interworking with TOOL. Vulnerability check module is standardized in event attribute management and ease of operation. Opening in terms of global sharing of vulnerability data, owasp zap / Angry ip Etc. were investigated in the SIEM system with interlocking design implementation method. As a result, it was proved that the inspection events were monitored and transmitted to the SIEM console by the vulnerability module of web and network target. In consideration of this, ESM And SIEM system In this paper, we propose a new vulnerability analysis method based on the existing information security consultation and the results of applying this study. Refer to the integrated interrelationship analysis and reference Vulnerability target Goal Hacking It is judged to be a new active concept against invasion attack.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.52-55
• /
• 2004

VMS (virtual manufacturing system) may be defined as a transparent interface/control mechanism to support human decision-making via simulation and monitoring of real operating situation through modeling of all activities in RMS (real manufacturing system). The three main layers in VMS are business process layer, manufacturing execution layer, and facility operation layer, and each layer is represented by a specific software system having its own input modeler module. The current version of these input modelers has been implemented based on its own 'local' framework, and as a result, there are no information sharing mechanism, nor a common user view among them. Proposed in this paper is a unified modeler framework covering the three VMS layers, in which the concept of PPR (product-process-resource) model is employed as a common semantics framework and a 2D graphic network model is used as a syntax framework. For this purpose, abstract class PPRObject and GraphicObject are defined and then a subclass is inherited from the abstract class for each application layer. This feature would make it easier to develop and maintain the individual software systems. For information sharing, XML is used as a common data format.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.9
• /
• pp.2353-2360
• /
• 1998

In the past. as the environment of the established soft ware system changed, most Re-Engineering perforned clustering on the basis of logical operation, In contrast, this paper proposes a method to perfonn clustering efficiently using the infonmltion sharing of each modult, of source programs that constitute the software For the clustering of related modules using the information sharing. We evaluated the result after measuring the degree of clustering using similarity and uniqueness algorithm on the basis of heuristic method of measurement. Thus, we could manipulate and achieve the clustering of related modules and procedures, This paper also prests a method to reconstruct the software system efficiently through the clustering and shows the possibility of its realization through real example.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.304-305
• /
• 2011

정보화 사회로 진입함에 따라 전자화 된 정보의 저장 및 관리는 매우 중요한 사안으로 부각되고 있으며 모든 통신기기 및 전산시스템은 365일 가동이 보장되어야 하므로 여러 대의 전원을 병렬 운전하여 신뢰성을 높이고 용량을 증대시키는 방안이 연구되고 있다. 특히, 신뢰성이 요구되는 분야에서는 리던던시(Redundancy) 개념이 중요하게 되어 병렬 운전의 도입이 확산 되고 있다. 현재 새로운 전력 구조는 절연된 컨버터의 평균 전력량을 다운시켜 다수의 전력변환기를 병렬운전 시키는 방향으로 변하고 있으며, 이는 전력변환기의 신뢰성을 증가시키고 예비기기에 대한 부담을 감소시키는 큰 장점을 갖고 있다. 최근에는 이더넷 라이터를 이용하여 부하분담(Load Sharing) 및 핫스왑(Hot-swap)기능을 DC/DC 컨버터에 내장하고 있는 추세이다. 본 연구에서는 7[kW]급 지능형 DC 모듈전원 제어기술 개발에 초점을 두고 최적의 부하분담을 갖는 고성능 전류 제어 알고리즘을 소개하고자 한다.

• Journal of the Korea society of information convergence
• /
• v.1 no.1
• /
• pp.1-8
• /
• 2008

If the management through the center server is unnecessary and JXTA is connected to a network, a communication with any kind of devices or some device is possible. And features that a communication with heterogeneous P2P systems is possible have. The important module of the designed Data exchange system an interworking between the P2P system which it is made we used API and the each other different protocol the possible data for replacement Data exchange system were designed this kind of a feature was to the utmost utilized may account for the XML Parser Component(XPC) which we use it parses the or about a request and the generated request, and the structure of the XML Making Component(XMC) which we use in generating the inappropriate a request and response.

• Journal of Internet Computing and Services
• /
• v.15 no.2
• /
• pp.143-147
• /
• 2014

In this paper, a novel MDI(Multiplex Distribution Interface) analyzer is designed in Ethernet-mode for DRM(Digital Radio Mondiale), and DRM+(Digital Radio Mondiale Plus) systems. The proposed MDI analyzer can reduce the overload of MDI packets by using memory sharing techniques into a common module block. In consequence, it verifies the received MDI packets by composition information of IP(Internet Protocol) and FAC(Fast Access Channel)/SDC(Service Description Channel) in DRM/DRM+ systems for the next generation digital radio broadcasting systems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.91-94
• /
• 2012

This paper describes an efficient implementation of ARIA crypto algorithm which is a KS (Korea Standards) block cipher algorithm. The ARIA crypto-processor supports three master key lengths of 128/192/256-bit specified in the standard. To reduce hardware complexity, a hardware sharing is employed, which shares round function in encryption/decryption module with key initialization module. It reduces about 20% of gate counts when compared with straightforward implementation. The ARIA crypto-processor is verified by FPGA implementation, and synthesized with a 0.13-${\mu}m$ CMOS cell library. It has 33,218 gates and the estimated throughput is about 640 Mbps at 100 MHz.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.3
• /
• pp.155-160
• /
• 2011

IPTV functions not only as media player that does play the broadcasting industry's contents, also as the gateway is guaranteed of QoS(Quality of Service). This is for free contents-sharing that device stores contents using home network circumstance, and is for watching with seamless network service. Also this have required next QoS model that can handle stably as it may contain more data of the small computing device in next generation home system. We need ubiquitous-oriented QoS's design and development project that focuses on internal and external media service, not the existing QoS nor one-sided QoS of media sevice industry. This paper focuses on network module development. This supports IPTV in media industry and two-way capability of QoS highlighting multimedia service in network industry. In additional, this can handle stably the multiplex signal of USN/RFID as the representative ubiquitous and home network that services high-speed wire and wireless interface, and support the seamless u-QoS.