• Cartoon and Animation Studies
• /
• 통권38호
• /
• pp.71-91
• /
• 2015

This study is a process to study the life drawing teaching method considering professional characteristics in animation and has a study objective to design the model and teaching method which applies the strategies considering the creative mechanism of the brain. Recently, study results about integrated teaching method are being announced which apply brain based learning principles as the alternative arguments about teaching methods in each area based on creativeness. In other words, integrated education based on creative mechanism in the brain is applied not only to fine arts and drawing education, but also to the entire areas of the arts. Life drawing is an area which demands comprehensive teaching method that vivid expressions could be skillfully obtained by understanding the communication methods with the objects through cognitive senses, creativeness and movements beyond the structural knowledge about human body. Therefore in this study, the strategies and methods for the skillfulness of life drawing and consequently arranged education model structure drawing are to be designed based on the creativeness, study materials and content factors which were analyzed in previous stages of this study. In order to combine the content factors based on creativeness and study materials of the brain which are the results of previous studies, the conclusion has been reached that 5 step cognitive strategy stages to wake brain senses, flexibilize the brain, purify the brain, integrate the brain and become the master of the brain. Strategic methods to execute this were designed with brain gym, right brain energization drawing and HSP(high-level cognizance) training. Teaching and learning model structure diagram which is designed based on this is to be continued to teaching and learning guidelines during the relevant semesters after the research.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• 제17권4호
• /
• pp.419-427
• /
• 2019

The application of ion crystallization technology was considered as a way to increase the operating efficiency and improve the operating performance of a liquid waste management system (LWMS) in the Advanced Power Reactor 1400 (APR 1400). Although ion crystallization technology has not been practically applied to Nuclear Power Plants (NPPs) until now, a previous experimental study demonstrated that it is possible to selectively remove at least 95% of various nuclide ions present in the liquid radioactive waste of NPPs. We reviewed the possibility of applying ion crystallization technology to the existing LWMS by applying the nuclide removal rate of ion crystallization technology and prepared a way to improve the existing LWMS in the APR 1400. Furthermore, we determined the optimized application location of ion crystallization technology in the existing LWMS by considering decontamination characteristics of the ion crystallization technology and the existing LWMS design features and operating experiences. The application of ion crystallization technology to the liquid waste collection tank, where liquid radioactive materials are collected, will have the least impact on the existing design while providing the greatest improvement. It is expected that the application of ion crystallization technology to the current APR 1400 or new NPPs would increase the operating efficiency of the LWMS and result in an improvement of system performance.

• Journal of Advanced Navigation Technology
• /
• 제19권5호
• /
• pp.423-432
• /
• 2015

This paper shows that design, manufacture and the performance of FC-NIC (fibre channel network interface card) for network unit configuration which is based on one of the 5 main configuration items of the common functional module for IMA (integrated modular Avionics) architecture. Especially, FC-NIC uses zynq SoC (system on chip) for host load reductions. The host merely transmit FC destination address, source memory location and size information to the FC-NIC. After then the FC-NIC read the host memory via DMA (direct memory access). FC upper layer protocol and sequence process at local processor and programmable logic of FC-NIC zynq SoC. It enables to free from host load for external communication. The performance of FC-NIC shows average 5.47 us low end-to-end latency at 2.125 Gbps line speed. It represent that FC-NIC is one of good candidate network for IMA.

• Journal of Korean Society of Environmental Engineers
• /
• 제39권9호
• /
• pp.527-533
• /
• 2017

Environmental concern about smart phone is growing because it has short product life span while having intensive production technology and cost. In this study environmental impact of the smart phone is quantified using the LCA methodology based on the ISO 14040 series standards. The assessment considers potential environmental impacts across the whole life cycle of the smart phone including; pre-manufacturing; manufacturing; distribution; product use; and end-of-life stages. The pre-manufacturing stage is the most dominant life cycle stage causing the highest environmental impacts among all 10 impact categories assessed. The global warming impacts of the smart phone in the pre-manufacturing, distribution, use, manufacturing, and end-of-life stages were 52.6% 23.9%, 15.7%, 7.0%, and 0.8%, respectively. Sensitivity of the life cycle impact assessment results to the system boundary definition and assumptions made were quite high. Three components of the smart phone, PCB, battery, and display module were identified as the key components causing majority of the potential environmental impact in the pre-manufacturing stage. As such the slim and light-weight design and the use of environmental friendly materials are important design factors for reducing the environmental impact of the smart phone.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• 제46권1호
• /
• pp.87-96
• /
• 2009

In conventional method, flight model is discribed to differential equation by linealization of nonlinear object motion equation. As state equation from differential equation of moving object, the controller is designed by transfer functions of each module under discrimination of stability criteria. But this conventional method is designed under limitation of nonlinearity from object's shape and speed. In other word, The greater part of guidance/navigation system was satisfied with the result of good performance for normal figure of flight object, not sudden changed flight condition, not high speed. But it is not able to give full play to its ability on flight object which has abnormal figure, sudden changeable motion, high speed. Therefore, in this paper was presented performance analysis of load control model for navigation/guidance system on flying object being uncertainty, non-linear like abnormal figure, sudden changeable motion, high speed and is presented method of trajectory control(controllability) ahead of controllability and stability to achieve flight mission. In other word, this paper shows the first step of Min-design method and flight control model.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제22권11호
• /
• pp.1034-1046
• /
• 2011

In this paper, a design and fabrication of 40 W power amplifier for the X-band using load-pull measurement of GaN HEMT chip are presented. The adopted active device for power amplifier is GaN HEMT chip of TriQuint company, which is recently released. Pre-matched fixtures are designed in test jig, because the impedance range of load-pull tuner is limited at measuring frequency. Essentially required 2-port S-parameters of the fixtures for extraction optimal input and output impedances is obtained by the presented newly method. The method is verified in comparison of the extracted optimal impedances with data sheet. The impedance matching circuit for power amplifier is designed based on EM co-simulation using the optimal impedances. The fabricated power amplifier with 15${\times}$17.8 $mm^2$ shows the efficiency above 35 %, the power gain of 8.7~8.3 dB and the output power of 46.7~46.3 dBm at 9~9.5 GHz with pulsed-driving width of 10 usec and duty of 10 %.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• 제48권9호
• /
• pp.22-30
• /
• 2011

Recently, the rising demand for intelligent video surveillance system leads to high-performance face recognition systems. The solution for low-resolution images acquired by a long-distance camera is required to overcome the distance limits of the existing face recognition systems. For that reason, this paper proposes a hardware design of an image resolution enhancement algorithm for real-time intelligent video surveillance systems. The algorithm is synthesizing a high-resolution face image from an input low-resolution image, with the help of a large collection of other high-resolution face images, called training set. When we checked the performance of the algorithm at 32bit RISC micro-processor, the entire operation took about 25 sec, which is inappropriate for real-time target applications. Based on the result, we implemented the hardware module and verified it using Xilinx Virtex-4 and ARM9-based embedded processor(S3C2440A). The designed hardware can complete the whole operation within 33 msec, so it can deal with 30 frames per second. We expect that the proposed hardware could be one of the solutions not only for real-time processing at the embedded environment, but also for an easy integration with existing face recognition system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제18권10호
• /
• pp.761-770
• /
• 2017

The objective of this study is to propose a community facility design for the revitalization of the piloti spaces of deteriorated low-rise residential blocks. For this study, the precedent research and institutional limitations are examined. In addition, this study selected and analyzed a deteriorated low-rise residential block utilizing pilotis. Generally, in this type of residence, 8 to 10 generations live together in multi-family houses and row houses, so it is a type of housing that lacks both public space and parking places. Therefore, we attempted to improve the situation of the communities by making use of the space between the pillars and walls without infringing on the parking places. In addition, we took into consideration the design and arrangement of the piloti by evaluating the inconveniences and needs of the residents through interviews. Specifically, various modules were planned and used to transform the spaces between the pillars of the pillar type piloti structure. This study examined the possibilities offered by various materials and modules, and studied the diverse possibilities that can be offered by changing the modules.

• Journal of Wetlands Research
• /
• 제14권4호
• /
• pp.645-656
• /
• 2012

The basin environment has been seriously damaged by reckless development during the past half century. The demand for management in the basin has increased, but the system for prediction and management is not sufficient. Therefore, the aim of this study is to design a GIS-based water quality linkage system using the most suitable simulation, HSPF (Hydrological Simulation Program-Fortran) in this basin of South Korea. To achieve this, data of HSPF model for simulation and GIS data for spatial analysis is collected. And the system applied linkages of the water quality model and GIS such as Loose coupling. Also, the major function of the system was designed as a modular unit. Ultimately, the system is developed using development language of VB.NET from Microsoft and ArcObjects component from ESRI based on design for a module unit. The water quality simulation system can be supported to prediction and management for basin environment of Yeong-San River. In the future study, scenario will be established using the result of HSPF model And will be expected to support to situation of future basin and policy making.

• Science of Emotion and Sensibility
• /
• 제6권4호
• /
• pp.15-23
• /
• 2003

Recently, there have been many attempts to develop BCI (brain computer interface) based on EEG (electroencephalogram). Measurement and analysis of EEG evoked by particular stimulation is important for the design of brain wave pattern and interface of BCI. The purpose of this study is to develop a general-purpose system that measures subject's reaction time after audio-visual stimulation which can work together with any other biosignal measurement systems. The entire system is divided into four modules, which are stimulation signal generation, reaction time measurement, evoked potential measurement and synchronization. Stimulation signal generation module was implemented by means of Flash. Measurement of the reaction time (the period between the answer request and the subject reaction) was achieved by self-made microcontroller system. EEG measurement was performed using the ready-made hardware and software without any modification. Synchronization of all modules was achieved by, first, the black-and-white signals on the stimulation screen synchronized with the problem presentation and the answer request, second, the photodetectors sensing the signals. The proposed method offers easy design of purpose-specific system only by adding simple modules (reaction time measurement, synchronization) to the ready-made stimulation and EEG system, and therefore, it is expected to accelerate the researches requiring the measurement of evoked response and reaction time.