• Journal of Korea Multimedia Society
• /
• 제22권9호
• /
• pp.1011-1019
• /
• 2019

In this paper, we propose a system that can more precisely identify and monitor the position of the tool used in the assembling workplace such as automobile production. The proposed positioning monitoring system is a combination of UWB communication module and MEMS IMU sensor. Since UWB does not need modulation and demodulation function and has low power density, UWB is widely used in indoor positioning field. However, it may cause positioning error due to errors in RF transmission and reception process, which may cause positioning accuracy. Therefore, in this paper, we propose an algorithm that uses IMU as an auxiliary means to compensate for errors that may occur in positioning using only UWB. The tag and anchor of UWB module measure the transmission / reception time by transmitting signals to each other and then estimate the distance between tag and anchor. The MEMS IMU sensor serves to provide positioning calibration information. The tag, which is a mobile node and attached to a moving tool, measures the three-dimensional position of the tool and transfers the coordinate data to the anchor. Thus, it is possible to confirm whether or not the specific tool is properly used according to the prescribed regulations.

• Journal of the Korean Society of Radiology
• /
• 제13권1호
• /
• pp.15-20
• /
• 2019

We developed a novel depth-of-interaction positron emission tomography (PET) detector using wavelength shifting (WLS) fibers and optimized it. The optimization module was designed by using two scintillators and three WLS fibers and attaching a sensor to the end of the WLS fiber. Optimum combinations were obtained through the light collection efficiency and the light collection ratio between sensors depending on coupling materials and reflectors of scintillators, WLS fibers and sensors. The highest light collection efficiency and the light collection ratio between sensors were obtained in the combination of the epoxy (coupling materials)-diffuse reflector (scintillators)-specular reflector (WLS fibers).

• The Journal of the Acoustical Society of Korea
• /
• 제28권7호
• /
• pp.674-679
• /
• 2009

This paper proposes a method of player event retrieval using combination of two functions: detection of player name in speech information and detection of sound event from audio information in golf videos. The system consists of indexing module and retrieval module. At the indexing time audio segmentation and noise reduction are applied to audio stream demultiplexed from the golf videos. The noise-reduced speech is then fed into speech recognizer, which outputs spoken descriptors. The player name and sound event are indexed by the spoken descriptors. At search time, text query is converted into phoneme sequences. The lists of each query term are retrieved through a description matcher to identify full and partial phrase hits. For the retrieval of the player name, this paper compares the results of word-based, phoneme-based, and hybrid approach.

• Journal of the Korea Society of Computer and Information
• /
• 제9권3호
• /
• pp.55-62
• /
• 2004

Tn the modern integrated healthcare environment, digital technology plays a critical role in the success of its operation. For overcoming the deteriorated healthcare management environment is to improve business service ability, cost and management efficiency through information processing of the business service process and the decision support system. For a solution of these problems, the Hospital Information System(HIS) was introduced. In this paper we proposed HIS system through the HL7-based with legacy system that improves both the efficiencies of medical of office and medical treatments. The implementation of HIS system enables combination of legacy systems including HL7 based OCS and PACS. And we proved the effective HIS development method provided by analysis of total module.

• Proceedings of the KSME Conference
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1492-1495
• /
• 2008

As a prerequisite of developing muscle biofeedback system which can simulate analogous isokinetic exercise, the purpose of this study was to study the effects of frequency and amplitude of whole-body vibration on the difference in sEMG on lower extremities during leg press exercise with/without vibration. The amplitude of vibration was set to 20, 50, 80 and the frequency of vibration was set to 10, 20, 30, and 50 Hz. EMG were measured at Vastus lateralis muscle and Vastus medialis muscle. MP100 EMG module(BIOPAC system Inc., USA) was used for EMG measurement. The result showed that the combination of frequency of 30Hz and amplitude of 50 had more activated EMG than other combination with relatively small work load (30kg). It is necessary to experiment the frequency between 20 and 40Hz in detail, and to normalize sEMG using maximal voluntary contraction (MVC).

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• 제39권6호
• /
• pp.24-35
• /
• 2002

The wavelet transform is combined with the boundary element method (BEM), to solve efficiently the Maxwell's equation and the proposed method is applied to the electromagnetic problem for the analysis of topological effects of phase-shifting masks. The accuracy of the module developed was verified by comparison with both analytic solutions and published results. In addition, it was found that the boundary element method in combination with the wavelet matrix transform would be more efficient than the conventional methods based on the BEM in views of the calculation speed and the usage of computer memory.

• Journal of applied mathematics & informatics
• /
• 제40권5_6호
• /
• pp.1137-1150
• /
• 2022

Consider the quantum algebra U_q(sl₂) over field 𝓕 (char(𝓕) = 0) with equitable generators x^±1, y and z, where q is fixed nonzero, not root of unity scalar in 𝓕. Let V denote a finite dimensional irreducible module for this algebra. Let Λ ∈ End(V), and let {A₁, A₂, A₃} = {x, y, z}. First we show that if Λ, A₁ is a Leonard pair, then this Leonard pair have four types, and we show that for each type there exists a Leonard pair Λ, A₁ in which Λ is a linear combination of 1, A₂, A₃, A₂A₃. Moreover, we use Λ to construct 𝚼 ∈ U_q(sl₂) such that 𝚼, A^-1₁ is a Leonard pair, and show that 𝚼 = I + A₁Φ + A₁ΨA₁ where Φ and Ψ are linear combination of 1, A₂, A₃.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.397-402
• /
• 2005

Photovoltaic (PV) module can generate electricity using sunlight without causing any environmental degradation. Due to higher fossil fuel prices and environmental awareness, PV applications are becoming more popular as clean source of electricity generation. PV output is sensitive to the operating temperature and can be drastically affected in Building Integrated PV (BIPV) systems. PV Solarwall (SWPV) combination and PV systems have been evaluated in this study for improvement in electrical output and system costs. PV modules under forced ventilation. A 75W polycrystalline silicon PV module was fixed on SW in front of the ventilation fan as it was indicated to be the coolest position on the SW in phoenix simulations. The effectiveness of cooling by means of the forced ventilating air stream has been studied experimentally. The results indicate that there appears to be significant difference in temperature as well as electricity output comparing the SWPV and BIPV options. Electrical output power recovered is about $4\%$ during the typical day of the month of February. RETScreen(R) analysis of a 3kW PV system hypothetically located at Taegu has shown that with typical temperature reduction of $15^{{\circ}C$, it is possible to reduce the simple payback periods by one year. The work described in this paper may be viewed as an appraisal of a SWPV system based on its improved electrical and financial performances due to its ability to operate at relatively lower temperatures.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제59권12호
• /
• pp.2202-2211
• /
• 2010

The wind power prediction system is composed of a meteorological forecasting module, calculation module of wind power output and HMI(Human Machine Interface) visualization system. The final information from this system is a short-term (6hr ahead) and mid-term (48hr ahead) wind power prediction value. The meteorological forecasting module for wind speed and direction forecasting is a combination of physical and statistical model. In this system, the WRF(Weather Research and Forecasting) model, which is a three-dimensional numerical weather model, is used as the physical model and the GFS(Global Forecasting System) models is used for initial condition forecasting. The 100m resolution terrain data is used to improve the accuracy of this system. In addition, optimization of the physical model carried out using historic weather data in Jeju. The mid-term prediction value from the physical model is used in the statistical method for a short-term prediction. The final power prediction is calculated using an optimal adjustment between the currently observed data and data predicted from the power curve model. The final wind power prediction value is provided to customs using a HMI visualization system. The aim of this study is to further improve the accuracy of this prediction system and develop a practical system for power system operation and the energy market in the Smart-Grid.

• Current Optics and Photonics
• /
• 제1권3호
• /
• pp.207-213
• /
• 2017

The Adaptive Front-lighting System (AFS) is a part of the active safety system, providing optimized vision to the driver during night time and other poor-sight conditions of the road by automatic adaptation of lighting to environmental and traffic conditions. Basically, an AFS provides four different modes of the passing beam as designated in an United Nations Economic Commission for Europe regulation (ECE324-R123): neutral state or country light (Class C), urban light (Class V), highway light (Class E), and adverse weather light (Class W). In this paper, we first present an optics design for an AFS system capable of producing the Class C/V/E/W patterns requiring only on/off modulation of multi-array LEDs with no need for any additional mechanical components. The AFS optics consists of two separated modules, cutoff and spread; the cutoff module lights a narrow central area with high luminous intensity, satisfying the cutoff regulation, and the spread module forms a wide spread beam of low luminous intensity. Each module consists of two major parts; the first converts a discretely positioned LED array into a full-filled area emitting light source plane, and the second projects the light source plane to a 25 m away target plane. With the combination of these two optics modules, the four beam patterns are formed by simple on/off modulation of multi-array LEDs. Then we report the development of a prototype that was demonstrated to provide the four beam patterns.