• 한국건축시공학회지
• /
• 제23권6호
• /
• pp.809-820
• /
• 2023

현대 사회에서는 1인 가구가 증가하고 주거 공간에 대한 수요가 증가하고 있으며 이에 대한 적절한 대안 모색이 중요하다. 빠른 시간 내에 경제적이고 지속 가능한 주거 공간을 제공하기 위한 방법으로 모듈러 건축이 주목받고 있다. 본 연구에서는 BIM(Building Information Modeling) 기술을 활용한 모듈러 건축 유닛 설계 및 시공 과정 최적화 방법을 제안한다. 1인 가구의 주거 요구사항과 삶의 질 향상을 위한 요인을 분석하였다. 이를 바탕으로 BIM을 활용하여 효율적이고 경제적인 모듈러 공동주택 유닛을 개발하였다. BIM은 건축 요소의 시각화 및 상호 연결을 제공하여 설계 과정의 오류를 최소화하고 생산성을 향상시킬 수 있다. 모듈러 건축의 장점과 한계를 평가하였다. BIM을 활용한 모듈러 건축물은 주거 문제를 해결할 수 있는 효과적인 대안으로 제시될 수 있으며 주거 공간의 품질과 다양성을 높일 수 있다. 다만 기술적 요구사항 및 비용 등의 한계도 고려되어야 한다. BIM 기반 1인 가구 공동주택 유닛 설계의 가능성과 장점을 제시하고 1인 가구 개선을 위한 실질적인 해결책으로 활용될 수 있다.

• 한국건설관리학회논문집
• /
• 제15권1호
• /
• pp.78-86
• /
• 2014

유닛 모듈러 공법은 공장생산에 의한 공기단축, 품질관리, 친환경성 등 기존공법과 다른 다양한 특징을 가지고 있다. 이러한 특징에도 불구하고 현재 국내에서는 군 병영시설, 학교, 소형주택에만 제한적으로 적용되고 있다. 본 연구에서는 모듈러 공법의 시장 확대 및 활성화를 위해 공동주택을 중심으로 특성요인들에 대한 중요도 및 기술수준을 IPA 기법을 통해 분석하여, 모듈러 시장의 활성화 방안을 제시하였다. 분석결과 유닛 모듈러 공법을 공동주택 시장에 적용함에 있어 사용성 및 경제성 측면의 특성요인들이 중요하게 평가되었으나, 현재 기술수준은 상대적으로 중요도가 낮은 시공성 측면의 특성요인들이 높게 나타났다. 유닛 모듈러 공법을 공동주택 시장에 적용하기 위해서는 시공성 측면의 높은 기술수준을 바탕으로 사용성, 경제성 측면의 특성요인에 대한 보다 집중적인 연구 개발이 필요할 것이다.

• 디자인학연구
• /
• 제12권1호
• /
• pp.5-12
• /
• 1999

본 연구는 편형별 아파트의 신발장에 대한 실태를 조사하여 향후 아파트 분양 시 제공되는 신발장의 기초자료를 제공하고 디자인 제안을 하는데 목적을 두었다. 이를 위해 현재 아파트 신발장의 사용실태, 거주자 만족도, 실측을 통한 신발장의 규모 및 내부구성 등을 파악하였고, 이를 근거로 각 평형별 신발장을 제안하였다. 제안의 초점은 우선 각 수납물품의 종류에 따라 가구의 내부 구성을 달리한 유니트를 개발한 후 이를 모듈화 한다는 것이다. 모듈의 단위는 거주자들의 불만요인을 분석하는 한편 일반적인 신발외 길이, 폭, 높이에 의거하였으며 이를 가족의 수나 수납물품의 양 그리고 아파트 규모에 따라 자유롭게 선택할 수 있도록 하였다. 본 연구에서는 이에 대한 여로 각 평형에 따라 일반적인 신발장의 규모를 설정하고 필요한 유니트를 선택한 결과를 제시하였다.

• 한국실내디자인학회논문집
• /
• 제19권2호
• /
• pp.144-154
• /
• 2010

This study aimed at analyzing physical characteristics of art-walls which is a focal point in contemporary interiors of the apartment houses. The factors for the analysis were types of apartments, positions, widths, compositions of elevation, and materials of art-walls. 89 art-walls were selected for the analysis ranging from $76m^2$ to $187m^2$. The result shows that wood was mostly applied to art-walls in small types of apartment in combination with other materials, and the composition of elevation was asymmetric. If the width of art-walls became smaller, the elevation was dominantly designed with symmetrical grid using tiles. Tiles turned out to be the general material for the single-applied material. However, if more than two materials were applied to art-walls, wood was chosen as the main material. Regardless of the types of apartment, big-sized art-walls were usually designed in the living room, and two different types of materials were applied to the walls. It reveals that art-walls of apartment houses have been planned and designed with focuses on the living room in the housing space. To make a modular panel for the art-walls, 400mm and 800mm sizes were both suggested, 400mm for the smaller composition, and 800mm for the larger composition of the art-walls. A Wall image is becoming more essential to the living space these days, because it can be both decorative and also supportive to residents' various individualities. Therefore, it is expected that further researches on art-walls are continuously performed, and also various designs of art-walls based on the modular system are developed in the near future.

• 대한건축학회논문집:계획계
• /
• 제34권6호
• /
• pp.31-37
• /
• 2018

With the progress of national policy researches on the modular construction, many studies have been conducted regarding the standardization of interior building materials. However, studies on the standardization of exterior building materials are still insufficient, and there are no dedicated exterior materials for modular construction. In this regard, this study investigated the necessary of standardization through the analysis on 7 kinds of exterior materials used in general buildings and exterior building materials applied to modular apartment houses in order to establish design criteria for the standardization of dedicated modular exterior materials. Based on the analysis results, assembly reference plane in conjunction with inside dimensions was set, and panelizing standardized in five parts was proposed to solve the problem of low exterior material standardization rate. It also proposed elastic gasket and steel bracket details that can compensate for the fabrication errors of unit boxes and construction errors in stacking.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2004년도 추계학술대회 논문집
• /
• pp.153-159
• /
• 2004

Apartment Housing in Korea has been developed rapidly and settled as a main housing form for short period, 40 years. In spite of increase of the apartment housing, it has pointed out that spatial organization of the apartment housing could accommodate residents 'various life style and life cycle. One of such planning methods is a flexible housing. Starting with the Gangbyoun-Siebeom apartment, flexible housing has been developed as merchandising constantly. However, flexible housing doesn't have enough understanding concerning lifestyle or life cycle of user individually, and it also means lack of comprehension and of flexibility, layout from modular coordination and planning of housing component. Therefore, according to the flexibility, the major goal of this research is to analyze the difficulty in realizing further of flexible housing in Korea and suggest implementation and alternatives or directions of flexible housing in Korea.

• 대한건축학회논문집:계획계
• /
• 제35권5호
• /
• pp.85-94
• /
• 2019

The modular apartment has been completed for the first time in Korea through the national research and development (R&D) project in December 2017, and 30 households moved in. Although conditions such as technicality and constructability have to be satisfied to adopt and spread the modular apartments in the future, economic feasibility is the most important factor among the conditions. The economic feasibility of modular apartments can be compared with that of existing reinforced concrete (RC) structure apartments. It is highly important to reduce the construction cost through standardization above all. The standardization refers to establishment of national design standards and principles, and it is important for manufacturers and building companies to comply with those standards and principles. The modular construction (MC) skill in Korea is at an early adoption stage and the MC market is not widely expanded yet. Thus, the application of the MC design, which is the basis of the standardization, has not been widely accepted. However, related R&D projects are now performing mainly by the Ministry of Land, Infrastructure, and Transport to promote modular apartments in recent years and the design standardization standard (draft) is now prepared to be notified as a result of the steady research. Furthermore, pilot complexes for demonstration purpose are under construction, starting from public rental apartments. Thus, MC method-applied public rental houses will be spread in near future. This study aims to investigate the current design status in the Ga-Yang Housing as a pilot modular complex to produce and supply more economical and efficient modular houses, and analyze the problems by comparing the design standardization standards with pre-notified design standardization standards and summarize the modifications between them thereby presenting foundational data for establishment of the design standardization in the modular business industry.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권5호
• /
• pp.101-109
• /
• 2018

모듈형 구조시스템은 학교 및 아파트 건물과 같은 저층 및 중층 구조물에 점점 더 많이 사용되고 있다. 최근에는 고층 건물에 모듈러 구조시스템을 적용하는 방법에 대한 연구가 수행되고 있다. 고층 모듈러 구조시스템에 대해 충분한 저항력과 경제적인 구조를 제공하기 위해 복합모듈 구조시스템이 제안되었다. 본 연구에서는 일련의 실험을 통해 단위 복합모듈 구조에 적용하기 위한 목적으로 비대칭 복합 기둥의 강도를 평가하고자 하였다. 실험적 연구는 기둥의 세장비, 편심율 및 관통바 유무에 따라 기둥의 강도에 미치는 영향에 중점을 두었다. 단위 모듈구조에 대한 비대칭 기둥단면의 설계식을 제안하였다. 결과로부터, 설계식은 단위 복합모듈 구조에서 비대칭 기둥단면의 적절한 강도 예측을 제공한다는 것을 알 수 있다.

• 한국주거학회논문집
• /
• 제20권4호
• /
• pp.31-38
• /
• 2009

In our country, the application of the design method of face to face dimension in wall-slab apartment has passed 10 years. So MC(Modular Coordination) design method has fixed in the design step to some degree. In Design and Work Execution of House the exclusive area of the apartment was calculated by face to face dimension. And the term of face to face dimension was known broadly to clients, construction company, etc. But design method of face to face dimension is not to simply extend the room size so far as wall depth in design process but to ensure the actual space should be considered with efficient use and assembly of building components. That is to say, Design method of face to face dimension is not to be defined by design step but to be related with construction and maintenance. However in construction process the point of face to face design method was not understood even now. So the purpose of this study was to extract the effect and question of face to face design method in construction process by survey of actual condition of structure and construction quality, and compare this result with existing construction method. The following project of this study is to survey of actual condition of interior components such as gypsum board, windows & doors etc. Therefore this study is to induce architectural long-life through architectural standardization construction and component's exchange, and, by the subject of the study on Apartment to have design guideline and basis for joining part between Gypsumboard and windows.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.169-170
• /
• 2023

Leakage defects account for a significant proportion of defect cases in modular homes. There are factors that can cause leakage defects at each stage, and quality control measures are required to minimize them. An improvement plan to prevent leakage defects was applied from the design drawings to the site of a modular public rental apartment complex in Sejong City 6-3, and a quality control plan was proposed to minimize leakage defects in the remaining process processes.