• Composites Research
• /
• 제29권6호
• /
• pp.408-413
• /
• 2016

흔히 사용되는 고분자는 다양한 형태로 제조되고 있다. 더 나아가, 나일론, 아라미드와 같은 연속적인 고분자 섬유가 최근에 제조되고 있다. 이번 실험에서 에폭시를 이용하여 고분자 섬유를 제조하였다. 비스페놀-A 타입의 에폭시가 사용되었고, 아민계 및 산 무수물계 경화제가 사용되었다. 에폭시 형상을 유지하기 위해 단계적 승온방식을 이용하여 에폭시 섬유를 경화했다. 계면접착력을 확인하기 위하여 두 섬유에 대한 상대적인 표면에너지를 수정된 정적 접촉각 방식으로 확인하였다. 인장실험을 통하여 기계적인 실험을 실시하였다. 인장실험 후에 파단형태가 경화제에 따라 달라지는 것을 확인하였다. 아민계 경화제를 사용한 에폭시 섬유의 경우 인장강도가 183 MPa로 70 MPa인 산 무수물계 경화제를 사용한 에폭시를 사용한 에폭시 섬유보다 더 좋은 것을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.546-546
• /
• 2008

Copper (Cu) Chemical mechanical polishing (CMP) has been an essential process for Cu wifing of DRAM and NAND flash memory beyond 45nm. Copper has been employed as ideal material for interconnect and metal line due to the low resistivity and high resistant to electro-migration. Damascene process is currently used in conjunction with CMP in the fabrication of multi-level copper interconnects for advanced logic and memory devices. Cu CMP involves removal of material by the combination of chemical and mechanical action. Chemicals in slurry aid in material removal by modifying the surface film while abrasion between the particles, pad, and the modified film facilitates mechanical removal. In our research, we emphasized on the role of chemical effect of slurry on Cu CMP, especially on the effect of amine functional group on removal rate selectivity between Cu and Tantalum-nitride (TaN) film. We investigated the two different kinds of complexing agent both with amine functional group. On the one hand, Polyacrylamide as a polymer affected the stability of abrasive, viscosity of slurry and the corrosion current of copper film especially at high concentration. At higher concentration, the aggregation of abrasive particles was suppressed by the steric effect of PAM, thus showed higher fraction of small particle distribution. It also showed a fluctuation behavior of the viscosity of slurry at high shear rate due to transformation of polymer chain. Also, because of forming thick passivation layer on the surface of Cu film, the diffusion of oxidant to the Cu surface was inhibited; therefore, the corrosion current with 0.7wt% PAM was smaller than that without PAM. the polishing rate of Cu film slightly increased up to 0.3wt%, then decreased with increasing of PAM concentration. On the contrary, the polishing rate of TaN film was strongly suppressed and saturated with increasing of PAM concentration at 0.3wt%. We also studied the electrostatic interaction between abrasive particle and Cu/TaN film with different PAM concentration. On the other hand, amino-methyl-propanol (AMP) as a single molecule does not affect the stability, rheological and corrosion behavior of the slurry as the polymer PAM. The polishing behavior of TaN film and selectivity with AMP appeared the similar trend to the slurry with PAM. The polishing behavior of Cu film with AMP, however, was quite different with that of PAM. We assume this difference was originated from different compactness of surface passivation layer on the Cu film under the same concentration due to the different molecular weight of PAM and AMP.

• 한국응용과학기술학회지
• /
• 제21권4호
• /
• pp.345-351
• /
• 2004

Highly ordered pure-silica MCM-41 materials possessing well-defined morphology have been successfully prepared with surfactant used as a template. The fabrication of mesoporous silica has received considerable attention due to the need to develop more efficient materials' for catalysis, separations, and chemical sensing. The surface modified MCM-41 was used as anadsorbent for biomolecules. Silica-supported organic groups and DNA adsorption on surface modified MCM-41 were investigated by FT-IR and UV-Vis spectrometer, respectively. The use of MCM-41 as the modification of electrode surfaces were investigated electrochemical properties of metal mediators with biomolecules. The modified ITO electrodes increased peak currents for a redox process of $[Ru(bpy)_3]^{2+}$ relative to the bare electrode. The electrochemical detection of DNA by cyclic voltammetry when the current is saturated in the presence of the mediator appeared more sensitive due to a higher catalytic current on the MCM-41 supported electrodes modified by carboxylic acid functional groups. The carboxyl or amine groups on the surface of MCM-41 interact and react with the $-NH_2$ groups of guanine and backbone, respectively. Highly ordered mesoporous materials with organic groups could find applications as DNA sensors.

• 한국동물위생학회지
• /
• 제34권4호
• /
• pp.429-439
• /
• 2011

This article described the comparison of a quick, easy, cheap, effective, rugged and safe (QuEChERS) sample preparation and the classical method established by National Veterinary Research and Quarantine Service (NVRQS) for the determination of pesticide residues in livestock products using GC-tandem mass spectrometry. The classical method by NVRQS used liquid-liquid partioning followed by evaporizing. The modified QuEChERS entailed extraction of 2 g sample with 15 ml acetonitrile containing 1% acetic acid followed by addition of 6 g anhydrous magnesium sulfate and 1.5 g sodium acetate. After centrifugation, 6 ml of the extract underwent a cleanup step (in a technique known as column-based solid phase extraction) using 400 mg each of $C_{18}$ and primary secondary amine sorbents plus 1,200 mg magnesium sulfate. The quantitation of individual pesticides by both methods was based on tissue standard calibration curves with a correlation coefficient in excess of 0.98 for the 24 pesticides. The detection limits by the classical method were ranged 1.3~5.0 ${\mu}g$/kg, with mean recoveries between 76.2% and 114.3% except aldrin (59.3%) and deltamethrin (63.6%). The detection limits by modified QuEChERS were ranged 0.3~6.2 ${\mu}g$/kg, with mean recoveries between 68.0% and 114.3% except dimethipin (152.6%), chlorfenvinphos (138.1%), 4,4-DDT (61.5%), aldrin (60.4%) and chinomethionate (30.3%).

• Elastomers and Composites
• /
• 제34권1호
• /
• pp.53-64
• /
• 1999

폴리아미드 수지가 첨가된 PVC졸 실란트의 기계적, 전기적, 열적특성에 대해 연구하였다. PVC졸은 디옥틸프탈레이트로 PVC를 가소화시켜 제조된 것이다. 본 연구에서는 PVC졸 실란트에 요구되는 접착성 개선제에 관한 연구의 일환으로 polyamide를 첨가하였을 때 PVC졸 실란트의 제반물성에 미치는 영향을 연구하였다. 폴리아미드 변성 PVC졸의 인장강도는 높은 Amino 값을 갖는 폴리아미드 B의 경우가 낮은 Amino 값을 갖는 폴리아미드 A의 경우 보다 더 높게 나타났다. 인장강도는 경화온도나 경화시간이 증가할수록 증가되었다. 또한 인장강도는 폴리아미드의 종류와 경화 시간에 관계없이 충진제인 $CaCO_3$ 함량이 증가될수록 감소되었다. 유전상수는 폴리아미드의 종류에 관계없이 폴리아미드의 함량에 따라 거의 일정하게 나타난 반면, tan ${\delta}$는 폴리아미드의 함량에 따라 약간 증가되었다. 그리고 열적안정성은 Amino 값이 높은 폴리아미드 수지의 경우가 Amino 값이 낮은 폴리아미드 수지의 경우보다 우수한 것으로 나타났다.

• 멤브레인
• /
• 제23권6호
• /
• pp.439-449
• /
• 2013

본 연구는 상용화된 방향족 폴리아미드 역삼투막에 diphenylamine (DPA)을 표면개질 시킴으로써 내염소성과 내오염성이 향상된 역삼투 복합막을 제조하고 최적화시키는 방법에 대해서 연구하였다. 역삼투막의 내염소성과 내오염성을 증가시키기 위해 반응성이 뛰어난 아민(amine)기를 가지고 있고 열적 화학적 안정성이 뛰어난 페닐기 2개가 있는 DPA를 사용하였고, 개질 온도와 시약 농도를 변화시켜가며 개질 조건을 최적화시켰다. XPS, AFM 그리고 contact angle을 이용하여 역삼투막의 표면 개질을 통한 표면 특성 변화를 확인하였으며 역삼투막의 투과성능 평가 결과 역삼투막의 내염소성과 내오염성이 향상된 역삼투 분리막을 제조하였다.

• Korean Chemical Engineering Research
• /
• 제55권3호
• /
• pp.287-295
• /
• 2017

Using nanotechnology, magnetic nanoparticles of iron oxide were produced via co-precipitation method and followed modification with organic compounds. In the next step, functionalized monomer was provided via coupling ${\beta}$-cyclodextrine and allylamine onto modified magnetic nanoparticles. These nanoparticles were used to establish the adsorption rate of celecoxib. Magnetic nanoparticles are modified by (3-mercaptopropyl)trimethoxysilane. Nano-adsorbent was characterized by analytical and spectroscopic methods, such as Fourier transform infrared spectroscopy, elemental analysis, thermo-gravimetric analysis, and transmission electron microscopy (TEM). Laboratory parameters, such as the kinetics of adsorption isotherms, pH, reaction temperature and capacity were optimized. Finally, by using this nano-adsorbent in the optimized condition, extraction of celecoxib from biological samples as urine, drug matrix and blood plasma was carried out by high performance liquid chromatography with sensitivity and high accuracy.

• Journal of Electrochemical Science and Technology
• /
• 제10권3호
• /
• pp.284-293
• /
• 2019

Herein, we report an electrode surface with a hierarchical assembly of wild-type M13 virus nanofibers (M13) to nucleate the AuPt alloy nanostructures by electrodeposition. M13 was pulled on the electrode surface to produce a virus film, and then a layer of sol-gel matrix (SSG) was wrapped over the surface to protect the film, thereby a bio-template was constructed. Blending of metal binding domains of M13 and amine groups of the SSG of the bio-template were effectively nucleate and directed the growth of nanostructures (NSs) such as Au, Pt and AuPt alloy onto the modified electrode surface by electrodeposition. An electrocatalytic activity of the modified electrode toward methanol oxidation in alkaline medium was investigated and found an enhanced mass activity ($534mA/mg_{Pt}$) relative to its controlled experiments. This bio-templated growth of NSs with precise composition could expedite the intention of new alloy materials with tuneable properties and will have efficacy in green energy, catalytic, and energy storage applications.

• Steel and Composite Structures
• /
• 제43권5호
• /
• pp.639-660
• /
• 2022

The bending and buckling behaviours of FG-GRNC laminated sandwich plates are investigated by using novel five-variables quasi 3D higher order shear deformation plate theory by considering the modified continuum nonlocal strain gradient theory. To calculate the effective Young's modulus of the GRNC sandwich plate along the thickness direction, and Poisson's ratio and mass density, the modified Halpin-Tsai model and the rule of the mixture are employed. Based on a new field of displacement, governing equilibrium equations of the GRNC sandwich plate are solved using a developed approach of Galerkin method. A detailed parametric analysis is carried out to highlight the influences of length scale and material scale parameters, GPLs distribution pattern, the weight fraction of GPLs, geometry and size of GPLs, the geometry of the sandwich plate and the total number of layers on the stresses, deformation and critical buckling loads. Some details are studied exclusively for the first time, such as stresses and the nonlocality effect.

• Advances in nano research
• /
• 제12권6호
• /
• pp.567-581
• /
• 2022

The free and forced vibration in addition to electric energy harvesting of a piezoelectric disk resting on two-parameter foundation modeled by modified couple stress as well as Kirchhoff plate theory is probed. The governing equations and boundary conditions are obtained using Hamilton's principle. Then, the free and forced vibration are solved using numerical solutions, generalized differential quadrature method (GDQM) and Newmark-beta method. The forced vibration is resulted from a base excitation load. Also, the possible voltage which can be harvested from this system is obtained using generalized integral quadrature method. The validity of the formulation and solution procedure is confirmed using a compassion study. The impact of parameters such as length effect, inner to outer radius ratio, and foundations parameters on the free and forced vibration as well as energy harvesting is investigated in detail. This paper can be a basis for future studies in the area of piezoelectric harvesters in small scales.