• Communications for Statistical Applications and Methods
• /
• 제10권2호
• /
• pp.277-289
• /
• 2003

We propose modified exact inferential methods in logistic regression model. Exact conditional distribution in logistic regression model is often highly discrete, and ordinary exact inference in logistic regression is conservative, because of the discreteness of the distribution. For the exact inference in logistic regression model we utilize the modified P-value. The modified P-value can not exceed the ordinary P-value, so the test of size $\alpha$ based on the modified P-value is less conservative. The modified exact confidence interval maintains at least a fixed confidence level but tends to be much narrower. The approach inverts results of a test with a modified P-value utilizing the test statistic and table probabilities in logistic regression model.

• 한국농공학회논문집
• /
• 제46권5호
• /
• pp.41-52
• /
• 2004

In this study, parameters of long and short term runoff model were optimized using genetic algorithm as a basic research for integrated water management in a watershed. In case of Korea where drought and flood occurr frequently, the integrated water management is necessary to minimize possible damage of drought and flood. Modified TANK model was optimized as a long term runoff model and storage-function model was optimized as a short term runoff model. Besides distinguished parameters were applied to modified TANK model for supplementing defect that the model estimates less runoff in the storm period. As a result of application, simulated long and short term runoff results showed 7% and 5% improvement compared with before optimized on the average. In case of modified TANK model using distinguished parameters, the simulated runoff after optimized showed more interrelationship than before optimized. Therefore, modified TANK model can be applied for the long term water balance as an integrated water management in a watershed. In case of storage-function model, simulated runoff in the storm period showed high interrelationship with observed one. These optimized models can be applied for the runoff analysis of watershed.

• 한국수자원학회논문집
• /
• 제41권7호
• /
• pp.747-759
• /
• 2008

본 연구에서는 관측강우의 통계특성 및 발생특성을 가장 적절하게 재현해 주는 강우모형을 선정하고자 하였다. 강우모형으로 Poisson과정에 근거한 점과정모형인 RPPM, NS-RPPM, modified NS-RPPM을 고려하여 모의자료에 대한 통계분석을 수행하였다. 그 결과, NS-RPPM과 modified NS-RPPM을 이용하여 모의된 자료가 여러 집성시간의 통계치를 적절하게 재현하였다. 또한 modified NS-RPPM을 이용하여 모의된 자료가 관측자료와 가장 유사한 발생특성을 가지는 것을 알 수 있었다. 특히, 홍수, 산사태 등 자연재해의 발생에 큰 영향을 주는 큰 강도를 가지는 강우를 관측치와 가장 유사하게 재현하였다. 모의된 강우사상의 총 강우량, 강우기간, 강우사상 간의 간격을 관측강우와 비교해본 결과 또한 modified NS-RPPM이 가장 좋은 결과를 보였다. 본 연구의 결과를 종합해 볼 때, 강우의 장기 모의를 위해 modified NS-RPPM을 이용하는 것이 가장 적절할 것으로 판단된다.

• 한국지반공학회논문집
• /
• 제26권1호
• /
• pp.55-62
• /
• 2010

진동타입기에 의해 시공되는 강널말뚝의 관입속도를 예측하고자 수정 Ramberg-Osgood 모델을 적용하여 진동타입기의 주기운동에 따른 지반의 동적 저항력을 모사하고자 하였다. 수정 Ramberg-Osgood 모델을 규정짓는 다양한 인자는 현장시험을 통해 구한 동적 지반저항력곡선의 양상을 반영하여 결정하였는데 이때 매개변수로는 표준관입시험값(N값)을 이용하였다. 관입속도는 해석결과가 현장시험결과에 비해 작게 계산되었으며 관입깊이에 따른 관입 소요시간은 해석결과가 현장시험결과에 비해 크게 계산되어 해석결과가 현장시험결과에 비해 보수적인 값을 보여주었다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2007년도 춘계학술발표논문집
• /
• pp.276-278
• /
• 2007

In this study the modified Two-Surface model was validated by comparing the model prediction with the results of the experiments carefully performed. It was seen that the modified Two-Surface model was capable of more realistically simulating the behaviors of clayey specimens, specially over-consolidated specimens. This is attributed mainly to the smooth transition rule from the elastic to elastoplastic regions.

• 대한금속재료학회지
• /
• 제47권10호
• /
• pp.613-620
• /
• 2009

The Kachanov-Rabotnov (K-R) creep model was proposed to accurately model the long-term creep curves above $10^5$ hours of Alloy 617. To this end, a series of creep data was obtained from creep tests conducted under different stress levels at $950^{\circ}C$. Using these data, the creep constants used in the K-R model and the modified K-R model were determined by a nonlinear least square fitting (NLSF) method, respectively. The K-R model yielded poor correspondence with the experimental curves, but the modified K-R model provided good agreement with the curves. Log-log plots of ${\varepsilon}^{\ast}$-stress and ${\varepsilon}^{\ast}$-time to rupture showed good linear relationships. Constants in the modified K-R model were obtained as ${\lambda}$=2.78, and $k=1.24$, and they showed behavior close to stress independency. Using these constants, long-term creep curves above $10^5$ hours obtained from short-term creep data can be modeled by implementing the modified K-R model.

• 한국지반환경공학회 논문집
• /
• 제2권3호
• /
• pp.89-99
• /
• 2001

본 연구에서는 가장 널리 사용되고 있는 지반모델인 Modified Cam-Clay 모델을 이용하여 피에조콘 관입 및 소산시험의 수치해석을 수행하였다. Modified Cam-Clay 모델 및 관련 유한요소 식들을 피에조콘 관입의 대변형 현상을 고려하기 위하여 Updated Lagrangian frame에서 formulation 하였다. 유한요소 해석 결과 얻어진 콘 관입저항치, 간극수압 및 소산곡선을 양산지역 현장 시험결과와 비교 분석하였다. 수치해석 결과는 시험결과와 비교적 잘 부합하는 것으로 고찰되었으나 보다 현실에 근접한 simulation을 위하여 연속적인 깊은 관입의 적절한 수치해석적 modeling이 요구되는 것으로 고찰되었다.

• 산업경영시스템학회지
• /
• 제35권1호
• /
• pp.57-65
• /
• 2012

The relationship between product quality/function and customer satisfaction has been considered an important point for the new product development. The seminal paper by Kano was the first to thoroughly address the non-linear relationship between product performance/function and customer satisfaction. In the analysis framework of the original Kano model, five factors are assumed, among which indifference factor occupies 40% in the classification scheme. When we analyze survey response using Kano model, many quality attributes can be resulted in indifference factor. This implies that some attributes which are meaningful tend to be classified as indifferent attributes for the customer satisfaction. In order to tackle this problem, a modified Kano model is proposed by reducing the indifference factor. The modified Kano model can be robust for the survey response. A survey is performed for the quality attributes of the smart phone. The response is analyzed and compared based on the original and modified Kano model. The surveyed quality characteristics of the smart phone are performance related attributes, application programs, functional attributes and subjective emotional quality attributes. Many quality attributes classified as indifference factor in the original model are classified as attractive, must-be, and expected factors, respectively.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.344-348
• /
• 2007

The acoustic liner has been used for the suppression of noise. The impedance characteristics of the acoustic liner are increased by the incident pressure. For the estimation of the acoustic liner on the incident acoustic pressure effect, the modified impedance model is suggested on the basis of the GE impedance prediction model. The modified impedance model is originated from the 3 parameter impedance model, and extended to the incident pressure parameter. The modified model is applied on the simple duct analysis with variant source pressure. Through the computation, it is observed that the fore directivity patterns of the duct are varied by the incident SPL level.

• 산업기술연구
• /
• 제24권A호
• /
• pp.179-184
• /
• 2004

Each year, new technological advancements for repair-purpose are being introduced to overlay the old deterioration of RC bridge deck at highway by latex-modified concrete. The days may come when this old problem will be successfully resolved. While the experimental works and researches are very active at both laboratory and field, only a few theoretical studies were performed on interfacial problems, especially on stress distribution and concentration of RC beam overlayed by latex-modified concrete. The repaired and strengthened structures would induce a premature failure due to the stress concentration at the adhesive layer of different material before the design expected failure. This paper investigated and proposed an analytical model for predicting interfacial shear and normal stresses of RC beam repair-purpose overlayed by latex-modified concrete. This would be used for predicting interfacial stresses and preventing premature failure at interfaces. This study modified Smith-Teng method for applying to cementitious repairing material, which was based on a direct governing equation and linear-elastic approach for interfacial normal and shear stresses. The proposed theoretical model was verified using commercial FEA program, LUSAS, in terms of interfacial stresses predicted by the proposed model and calculated by LUSAS.