• 상하수도학회지
• /
• 제27권1호
• /
• pp.139-146
• /
• 2013

A process diagnosis method for membrane water treatment plant was developed using a constant flux membrane fouling model. This diagnosis method can be applied to a real-field membrane-based water treatment plant as an early alarming system for membrane fouling. The constant flux membrane fouling model was based on the simplest equation form to describe change in trans-membrane pressure (TMP) during the filtration cycle from a literature. The model was verified using a pilot-scale microfiltraton (MF) plant with two commercial MF membrane modules (72 m2 of membrane area). The predicted TMP data were produced using the model, where the modeling parameters were obtained by the least square method using the early plant data and modeling equations. The diagnosis was carried out by comparing the predicted TMP data (as baseline) and real plant data. As a result of the case study, the diagnsis method worked pretty well to predict the early points where fouling started to occur.

• International Journal of Control, Automation, and Systems
• /
• 제3권3호
• /
• pp.493-501
• /
• 2005

A power plant simulation tool ('PowerSim') has been developed with 10 years experience from the development of a plant simulator for efficient modeling of a power plant. PowerSim is the first developed tool in Korea for plant simulation with various plant component models, instructor station function and the Graphic Model Builder (GMB). PowerSim is composed of a graphic editor using general purpose design software, a netlist converter, component models, the scheduler, Instructor Station and an executive. The graphic editor generates a netlist that shows the connection status of the various plant components from the Simdiagram, which is drawn by Icon Drag method supported by GUI environment of the PowerSim. Netlist Converter normalizes the connection status of the components. Scheduler makes scheduling for the execution of the device models according to the netlist. Therefore, the user makes Simdiagram based on the plant Pipe and Instrument Drawing (P&ID) and inputs the plant data for automatic simulating execution. This paper introduces Graphic Model Builder (GMB), instructor station, executive and the detailed introduction of thermal-hydraulic modeling. This paper will also introduce basic ideas on how the simulation Diagram, based on netlist generated from general purpose design software, is made and how the system is organized. The developed tool has been verified through the simulation of a real power plant.

• 방사선산업학회지
• /
• 제9권1호
• /
• pp.37-46
• /
• 2015

This study examines mutual perceptions between general public and nuclear plant employees on understanding nuclear policy communication applying the co-orientation model. The total of 414 responses were analyzed including 211 of the general public and 203 of plant employees. Results indicate that agreement between general public and plant employees is relatively high, in that general public tends to have negative evaluation to nuclear policy communication, but plant employees tends to have positive one. In terms of congruence, general public perceive that plant employees might have more positive evaluation than themselves, and nuclear plant employees perceive that general public might have more negative evaluation than themselves. Finally, in terms of accuracy, general public accurately estimate how nuclear plant employees perceive on policy communication, whereas nuclear plant employees unaccurately estimate how general public perceive on policy communication.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1721-1726
• /
• 2004

Heat rate is a representative index to estimate the performance of turbine cycle in nuclear power plant. Accuracy of heat rate calculation is dependent on the accuracy of measurement for plant status variables. Uncertainty of heat rate can be modeled using uncertainty propagation model. We developed practical estimation model of heat rate uncertainty using the propagation and regression model. The uncertainty model is used in the performance analysis system developed for the operating nuclear power plant.

• 한국농림기상학회:학술대회논문집
• /
• 한국농림기상학회 2011년도 학술발표회
• /
• pp.12-14
• /
• 2011

Crop growth simulation models have been developed as research and management tools. When these models are needed to incorporate new knowledge on phenology and physiology of crops, programming languages have been used for development and documentation of these models. However, researchers may have limited skill in programming languages. Furthermore, software developer may find it challenging to improve the crop models because documentation of the models are rarely available. The Unified Modeling Language (UML) can provide a simple approach for development and documentation of model. A template for implementation of the model can be obtained using the UML, which would facilitate code re-use and model improvement.

• 생물환경조절학회지
• /
• 제2권2호
• /
• pp.126-135
• /
• 1993

Recently, the characteristic of plant production systems in Korea has been changed with the strong trends of integration and large scale, using environmental control techniques. To satisfy this change successfully, first of all, the environmental prediction inside the system must be preceded. While many environmental prediction models for plant production system were developed by many persons, each model cannot be applied to the every situation without the perfect understanding of source codes and the technical modification. The purpose of this study is building the environmental prediction model to predict and evaluate the environment inside the system numerically, and also developing the multipurpose program available for practical design. The model consisted of the basic system model, the cultivation related model and the environmental control related model. The contents of each model are as follows : the basic system model is dealing with thermal and light environments, soil environment and ventilation : the cultivation related model with soil and hydroponic cultures ; and the environmental control related model with thermal curtain and heat exchanging system. The environmental prediction model was developed using a common simulation program, PCSMP, so that it could be easily understood and modified by anyone. Finally, the model was executed and verified through comparison between simulated and measured results for soil culture, and both results showed good agreements.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.48.6-48
• /
• 2002

in this paper, each methodology, e.g. normal single PID controller, direct synthesis method and inverse response compensator, will be compared to determine the best inverse response plant control method, by based on the appearance of the control performance and robustness from the simulation results. The flexibility of being able to maintain the system stability during the presence of plant model mismatch is one of the criteria to measure the robustness of overall control system. Once, plant has changed the condition, the model will need to be updated. Hence, the designed controller will not work properly. The caused of plant model mismatch is stayed by definition unknown but the most possib...

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.212-213
• /
• 2014

The purpose of this study is to suggest analysis model of RCB construction in nuclear power plant. For the objective, This study drew the risk factors of RCB construction from existing literature. The results of the study proposed analysis model made hierarchy in rebar, form, and concrete work. These will be baseline data for risk management in construction project of nuclear power plant.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1983년도 하계학술회의강연.논문초록집
• /
• pp.135-138
• /
• 1983

This paper studies a variable structure adaptive model following control system which can control a plant in which the parameters of the controlled plant can not be estimated because they vary with time and in which the controlled plant has noise. The values of the feedback gain matrices for given states are obtained the equivalent control law, and the adaptive controller has been designed using the adaptive mechanism which switches the matrices. The adaptive controller minimizes the state error vector, that is, the difference between the state vector of the model and the state vector of the controlled plant. A controlled plant which has time varying parameters, a controlled plant which has only noise, and a controlled plant which has both have been controlled by the designed adaptive controller. The continuous single input-output system has been analysed by computer. This control system may be used to control practical systems by the addition of a microcomputer.

• Journal of Computational Design and Engineering
• /
• 제1권3호
• /
• pp.213-222
• /
• 2014

This paper reviews and identifies issues in the application of virtual commissioning technology for automated manufacturing systems. While the real commissioning of a manufacturing system involves a real plant system and a real controller, the virtual commissioning deals with a virtual plant model and a real controller. The expected benefits of virtual commissioning are the reduction of debugging and correction efforts during the subsequent real commissioning stage. However, it requires a virtual plant model and hence still requires significant amount time and efforts. Two main issues are identified, the physical model construction of a virtual device, and the logical model construction of a virtual device. This paper reviews the current literature related to the two issues and proposes future research directions to achieve the full utilization of virtual commissioning technology.