• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.791-795
• /
• 2006

하이브리드 센서 네트워크에서 static sensor node들이 초기 배치된 후, coverage-hole을 결정하여, hole을 커버할 mobile sensor node들의 필요한 수 및 위치를 결정하고 배치하는 연구는 상당한 수준에 이르렀다. 그러나 mobile sensor node들을 호출하고 배치하는데 너무 많은 에너지를 소모하고 있다. 본 논문에서는 coverage-hole에서 mobile sensor node들을 호출하기 전에 mobile sensor node들을 최대한 coverage-hole에 가깝게 배치하여, 호출하는데 소요되는 에너지를 획기적으로 절감하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.10
• /
• pp.2529-2547
• /
• 2012

In this paper, we use a quadrotor-based mobile sink to gather sensor data from the terrestrial deployed wireless sensor network. By analyzing the flight features of the mobile sink node, we theoretically study the flight constraints of height, velocity, and trajectory of the mobile sink node so as to communicate with the terrestrial wireless sensor network. Moreover, we analyze the data amount which the mobile sink can send when it satisfies these flight constraints. Based on these analysis results, we propose a data acquisition approach for the mobile sink node, which is discussed detailed in terms of network performance such as the transmission delay, packet loss rate, sojourning time and mobile trajectory when given the flying speed and height of the mobile sink node. Extensive simulation results validate the efficiency of the proposed scheme.

• Journal of Information Processing Systems
• /
• v.6 no.2
• /
• pp.147-162
• /
• 2010

In this paper, we present a fine-grained localization algorithm for wireless sensor networks using a mobile beacon node. The algorithm is based on distance measurement using RSSI. The beacon node is equipped with a GPS sender and RF (radio frequency) transmitter. Each stationary sensor node is equipped with a RF. The beacon node periodically broadcasts its location information, and stationary sensor nodes perceive their positions as beacon points. A sensor node's location is computed by measuring the distance to the beacon point using RSSI. Our proposed localization scheme is evaluated using OPNET 8.1 and compared with Ssu's and Yu's localization schemes. The results show that our localization scheme outperforms the other two schemes in terms of energy efficiency (overhead) and accuracy.

• Journal of Korea Multimedia Society
• /
• v.20 no.4
• /
• pp.640-648
• /
• 2017

Sensors have limited resources in sensor networks, so efficient use of energy is important. In order to use the energy of the sensor node efficiently, researches applying mobile sink to the sensor network have been actively carried out. The sink node moves the sensor network, collects data from each sensor node, which spread the energy concentrated around the sink node, thereby extending the entire life cycle of the network. But, when the sink node moves, it requires a reset of the data transmission path, which causes a lot of control messages and delays. In this paper, we propose a CMS(Cluster-based Mobile Sink) method to support the movement of mobile sink in a cluster sensor environment. The proposed scheme minimizes an amount of control messages without resetting the routing paths of entire sensor networks by supporting the sink mobility path using the neighbor cluster list. And, it simplifies the routing path setup process by setting a single hop path between clusters without a gateway. The experiment results show that the proposed scheme has superior energy efficiency in processing and network structure, compared with existing clustering and mesh routing protocols.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12A
• /
• pp.994-1005
• /
• 2011

In this paper, we propose a novel approach to optimize the movement of mobile sink node, called AMSP(Adaptive Mobile Sink Path) for mobile sensor network environments. Currently available studies usually suffer from unnecessary data transmission resulting from random way point approach. To address the problem, we propose a method which uses the Hilbert curve to create a path. The proposed method guarantees shorten transmission distance between the sink node and each sensor node by assigning orders of the curve according to sensor node density. Furthermore, The schedule of the sink node is informed to all of the sensing nodes so that the Duty Cycle helps the network be more energy efficient. In our experiments, the proposed method outperforms the existing works such as TTDD and CBPER by up to 80% in energy consumption.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2B
• /
• pp.151-161
• /
• 2009

The PULSE protocol can greatly reduce power consumption using a node's sleep state. But this protocol does not consider movement of a sink node in a sensor network. In the mobile sensor network a routing protocol must recover path error by movement of a sink node as quickly as possible. Therefore we have to achieve fast path recovery and power saving to support movement of a sink node in a sensor network. This paper proposes the Mobile PULSE protocol which is a improved routing protocol for a mobile sink node. And we evaluate Mobile PULSE and show that the Mobile PULSE reduces the recovery time about 40% compared with original PULSE protocol. Mobile PULSE increases energy consumption than PULSE as a maximum of 0.8%, which means Mobile PULSE is similar to PULSE in energy consumption. This paper shows mobile PULSE's capability in the mobile sensor network through evaluation of path recovery time and power consumption.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.2
• /
• pp.35-43
• /
• 2018

In this paper, we propose a grid-based efficient routing protocol for a mobile sink in wireless sensor networks. In the proposed protocol, the network is partitioned into grids and each grid has a grid head. For the efficient routing to a mobile sink, the proposed protocol uses a mobile sink representative node to send the data to a mobile sink and grid heads are used as a mobile sink representative node. Furthermore, the proposed protocol uses nodes in the boundary of the center grid as position storage nodes. The position storage nodes store the position of a mobile sink representative node and provide source nodes with it for data delivery. With these features, the proposed protocol can reduce a lot of overhead to update the position information and improve the delay of data delivery to a mobile sink. The proposed protocol performs better than other protocols in terms of the delay and the energy consumption per node in the performance evaluation.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.7
• /
• pp.139-148
• /
• 2008

The sensor network is applied from the field which is various. The sensor network nodes are exchanged with mobile environment and they construct they select cluster and cluster headers. In this paper, we propose the Dynamic Prediction Clustering Algorithm use to Skyline queries attributes in direction, angel and hop. This algorithm constructs cluster in base mobile sensor node after select cluster header. Propose algorithm is based made cluster header for mobile sensor node. It "Adv" reduced the waste of energy which mobile sensor node is unnecessary. Respects clustering where is efficient according to hop count of sensor node made dynamic cluster. To extend a network life time of 2.4 times to decrease average energy consuming of sensor node. Also maintains dynamic cluster to optimize the within hop count cluster, the average energy specific consumption of node decreased 14%.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.2
• /
• pp.1-6
• /
• 2009

Localization of nodes is a key technology for application of wireless sensor network. Having a GPS receiver on every sensor node is costly. In the past, several approaches, including range-based and range-free, have been proposed to calculate positions for randomly deployed sensor nodes. Most of them use some special nodes, called anchor nodes, which are assumed to know their own locations. Other sensors compute their locations based on the information provided by these anchor nodes. This paper uses a single mobile anchor node to move in the sensing field and broadcast its current position periodically. We provide a weighted centroid localization algorithm that uses coefficients, which are decided by the influence of mobile anchor node to unknown nodes, to prompt localization accuracy. We also suggest a criterion which is used to select mobile anchor node which involve in computing the position of nodes for improving localization accuracy. Weighted centroid localization algorithm is simple, and no communication is needed while locating. The localization accuracy of weighted centroid localization algorithm is better than maximum likelihood estimation which is used very often. It can be applied to many applications.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.225-228
• /
• 2005

A context-aware services platform supporting mobile agents consists of sensor nodes and a sensor coordinator. Sensor nodes collect environmental information and transmit the collected information to the sensor coordinator through wireless sensor networks. The sensor coordinator passes the information to the context-aware service module, and the mobile agent. The context-aware service module or the mobile agent performs services suitable for a user's situation based on the environmental information and a service actuation message is delivered to an actuation node through the sensor coordinator. In this paper, we present a context-aware services platform structure employed in our project, and describe context-aware services platform interfaces with a context-aware service module and mobile agents.