• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.13-18
• /
• 2003

Heat pipes with binary mixture fabricated and tested for applications where condenser temperature is in a range of $10^{\circ}C$ to $130^{\circ}C$. The pipe materials 8.0 mm O.D. cupper tube and the working fluids are ethanol-water mixtures. The total length of test of the heat pipe was 1710mm in which evaporator section was 1570mm, adiabatic section was 50mm and condenser section was 90mm. Mixing ratios of ethanol and water could be variable in mole fraction. Temperature of condenser section was $10^{\circ}C$, $80^{\circ}C$ and $130^{\circ}C$. Heat pipe performance experimental study was accomplished with change of mixing ratio in these temperatures. The fill charge ratio was 20% of the heat pipe volume. Wick structure was woven-wire and method of experimental work was that thermal load was increased 20W step until the heat pipe wall temperature reached at $150^{\circ}C$. Results were following: At coolant $10^{\circ}C$ and $130^{\circ}C$, mixing ratio that have beat thermal performance was 0.8M+ and at coolant $80^{\circ}C$, was 0.3 ${\sim}$ 0.5 M+.

• Composites Research
• /
• 제27권4호
• /
• pp.168-173
• /
• 2014

2개 이상의 에폭시 기지재의 배합비를 이용하여 최적의 에폭시 복합재료를 제조하였다. 이 실험에서 노볼락계 에폭시 및 아이소시아네이트계 에폭시를 기지재로 사용하였다. 그에 따라 화학적 조성의 변화를 이용하여 다양한 실험을 통한 최적의 에폭시 배합비를 유추하였고, 에폭시의 내열성 및 계면을 파악하기 위하여 열중량측정기를 이용하여 유리전이온도의 변화를 파악하였고 정적 접촉각을 측정하였다. 기계적 물성을 파악하기 위하여 에폭시 배합비에 따른 유리섬유/에폭시 복합재료의 인장, 압축, 굴곡강도를 상온에서 및 노화시간에 따라 파악하였다. 에폭시와 유리섬유간 계면을 개념도로 나타냈다. 시험 결과 에폭시 배합비에 따른 적외선 피크 및 유리전이온도 변화를 확인하였다. 서로 다른 에폭시의 배합비가 1:1일 때 기계적물성이 상대적으로 좋은 것을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.221-224
• /
• 2002

A technique of mixing enhancement in an underexpanded sonic round jet is studied with fully expanded jet Mach number 1.5. Tonal sound, jet screech can be produced at some underexpansion pressure ratio in a sonic jet. Since the jet screech excites the initial Jet shear layer to change the flow, a reflector which focuses the jet screech near the nozzle lip is designed. The reflector has an elliptic shape of which two foci are located near the nozzle lip and the jet screech source region. Jet screech tone near the nozzle lip increases with the elliptic reflector and spreading of the jet largely increases. It is concluded that mixing enhancement of the jet with the elliptic reflector is attributed to large scale structures which are initially excited by the increased jet screech.

• 한국해양환경ㆍ에너지학회지
• /
• 제10권1호
• /
• pp.53-58
• /
• 2007

하구에서 오염물은 salt finger가 발생할 수 있는 적당한 조건하에서 혼합과 수송이 일어날수 있다(Hwang and Rehmann, 2004). 선형이론을 salt finger가 일어날수 있는 적절한 조건하에 유체의 운동을 예측하는데 적용하였다. 모의 결과는 기존의 실험 결과와 거의 비슷한 결과를 도출하였다. 밀도율이 2보다 클 때, Turner(1967)가 열과 소금을 이용한 실험에서 발견한 것처럼 혼합율(the flux ratio)은 $0.55{\sim}0.57$를 보이며, 소금과 설탕을 이용한 Griffiths(1980)의 실험에서와 같이 0.87의 혼합율을 도출하였다. 두개의 매개 물질의 분자확산계수가 증가함으로써 이송속도율도 밀도율과 함께 증가하였고, 높은 밀도율에서 이송속도율이 정상상태가 되는데 걸리는 시간이 증가하였다.

• 한국식품과학회지
• /
• 제22권7호
• /
• pp.817-823
• /
• 1990

고추씨 혼합비율에 따른 고추가루를 상대습도 11%에서 93%까지 8단계의 상대습도별로 $15^{\circ}C,\;25^{\circ}C$ 및 $40^{\circ}C$의 온도구에 저장하면서 고추가루의 흡습특성을 비교하였다. 저장시간에 따른 고추가루의 흡습곡선은 고추씨 혼합비율에 관계없이 RH 43% 이하에서는 단시간 내에 평형에 도달하여 수분함량의 변화가 거의 없었으나 RH 75% 이상에서는 평형수분함량이 급격히 증가하였다. 따라서 RH 75% 이상에서는 갈변현상이 나타났고, RH 33% 이하에서는 탈색현상이 나타났다. 고추씨를 완전히 제거한 고추가루의 단분자층 수분함량은 온도에 따라서 5.88%에서 7.35%로서 온도가 내려감에 따라 증가하였고, 고추씨 혼합비율이 높을 수록 단분자층 수분함량은 감소하였다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2020년도 춘계학술대회
• /
• pp.196-196
• /
• 2020

• 대한기계학회논문집B
• /
• 제34권9호
• /
• pp.835-841
• /
• 2010

MEMS 가스터빈 엔진에서 연료와 공기의 혼합에 영향을 미치는 중요한 요소중 하나는 연료 분사구 형상의 설계이다. 본 연구에서는 3 개의 연료 주입부와 각 주입부에 연결된 여러 개의 분사구에 의해 연료와 공기가 혼합되는 시스템을 고려하여 분사구의 배열과 연료 공급비율의 변화에 따른 혼합 정도를 당량비를 통하여 정량적으로 해석하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권4호
• /
• pp.204-208
• /
• 2006

In this study, we investigated the ion energy distributions in a chlorine based inductively coupled plasma by quadrupole mass spectrometer with an electrostatic ion energy analyzer. Ion energy distributions are presented for various plasma parameters such as $BCl_3/Ar$ gas mixing ratio, RF power, and process pressure. As the $BCl_3/Ar$ gas mixing ratio and process pressure decreases, and RF power increases, the saddle-shaped structures is enhanced. The reason is that there are ionized energy difference between $BCl_3$ and Ar, change of plasma potential, alteration of mean free path. and variety of ion collision in the sheath.

• Transactions on Electrical and Electronic Materials
• /
• 제10권1호
• /
• pp.1-4
• /
• 2009

Dry etching characteristics of indium tin oxide films and etch selectivities over photoresist films were investigated using $Cl_2/HBr$ inductively coupled plasma. From a Langmuir probe diagnostic system, it was observed that while the plasma temperature was kept nearly constant in spite of the change of the HBr mixing ratio, the positive ion density decreases rapidly with increasing the mixing ratio. On the other hand, a quadrupole mass spectrometer showed that the neutral HBr and Br species increased. The etching mechanism in the $HBr/Cl_2$ plasma was analyzed.

• 한국농공학회지
• /
• 제37권5호
• /
• pp.90-100
• /
• 1995

This study was performed to develop the lightweight concrete using synthetic lightweight aggregate and natural coarse aggregate. Mixing ratios were three types, the first type was mixed cement and synthetic lightweight fine aggregate (Type CP), the second type was mixed cement, synthetic lightweight fine aggregate and synthetic lightweight coarse aggregate (Type CPE), the third type was mixed cement, synthetic lightweight fine aggregate and natural coarse aggregate (Type CPN). The results of this study are summarized as follows ; 1. The W/C of each mixing ratio was increased with increase of the amount of cement used, and it was shown higher in order of Type CP, CPN, CPE. 2. The unit weight of Type CP, CPE and CPN was 1.473~1.647g/cm$^3$, 1.467~1.622g/cm$^3$ and 1.658~1 .838g/cm$^3$, respectively. And the absorption ratio was approximately 20%, which was higher than that of the normal cement concrete. 3. The compressive strength of Type CP was shown 178 ~249kg/cm2, Type CPE was shown 149~241kg/cm$^2$ and Type CPN was shown 196~297kg/cm$^2$, respectively. Each strength ratio was smaller than that of the normal cement concrete. 4. The pulse velocity of Type CP, CPE and CPN was 2, 688~3, 240m/sec, 2, 981~3, 324m/sec and 2, 989 ~ 3, 545m/sec, respectively. And it was increased with increase of strength and unit weight. 5. The length change ratio at 28 days was in the range of 0.057~0.077%, and earlier length change ratio was higher than that of the later.