• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.120-127
• /
• 2016

Due to the enlargement and high-rise of reinforced concrete structure, the application of high functional material is required. However, high-strength bar is recently introduced to the country and the material is insufficient to measure the variation of quantity of rebar quantitatively when using high-strength bar. For these reasons, this study is to provide useful data in cost decision making when applying high-strength bar at a stage of architectural project planning. For residence-commerce complex buildings, we set up six types of conditions such as in case of using only rebar, in case of using only high-strength bar, in case of using rebar mixed with high-strength bar and so on. With the standard of study model 1 that applies only SD400 regardless of rebar diameter, the analyzed result of rebar variation and the cost change of construction in other study model is as follows. When the rebar amount and cost in study model I was 100%, each ratio was 88.3% and 90.5% in study model II, 80.2% and 83.4% in study model III, 91.9% and 93.5% in study model IV, 88.9% and 87.7% in study model V and 82.4% and 85.5% in study model VI. Therefore, in case of rebar amount and construction cost, study model III was evaluated as the best that was applied only SD600.

• Resources Recycling
• /
• v.13 no.2
• /
• pp.39-46
• /
• 2004

The amount of electric furnace dust has been steadily increasing due to the increase of iron scraps which are usually recycled by electric furnace melting process. To date, this electric furnace dust has usually been treated by landfilling, however, because of shortage of landfill sites and heavy metal leaching more desirable treatment schemes are urgently needed. Among several possible schemes for the proper treatment of electric furnace dust, its recycling can be said to be most desirable. In present study, the triboelectrostatic separation of zinc and zinc-containing components from electric furnace dust was attempted based on its physicochemical properties such as particle shape, size distribution, and chemical assay. The dust was found to be mixed with spherical and non-spherical shaped particles and its major component materials were $ZnFe_2$$O_4$, ZnO, Fe, Zn, and FeO. The content of zinc-containing components in the entire dust was observed to be in the range of 15～30 wt%, which reasonably justified that zinc is recyclable. The triboelectrostatic characteristic of each component material was found to be different each other since their work functions were different, and based on this characteristic zinc and zinc-containing component could be flirty separated from the dust. After selecting a proper tribo-elec-trification material, the separation features of zinc and zinc-containing component were examined by taking the distance of electrodes, electric field strength, and scavenging as the experimental variables. The highest zinc-content obtained under the optimal separating condition was found to be up to 50wt%.

• Journal of Chest Surgery
• /
• v.30 no.6
• /
• pp.598-606
• /
• 1997

Among 136 patients having undergone mitral valve surgery from September of 1994 through August of 1995 in Sejong Heart Institute, forty four patients(18 males, 26 females) underwent mitral valve reconstruction using prosthetic rings and their clinical results were evaluated. Patients'ages ranged from 5 to 63 years(mean age 38.2 years). Mitral valvular diseases were due to rheumatic origin in 30 patients(68%), degenerative in 13(30%), and congenital in one patient(2%). Mitral regurgitation(MR) was in 33 patients(76%), mitral stenosis 2(5%), and mitral stenoinsufaciency 9 patients(19%). The patients were divided into Carpentier's functional groups : type I, 5 patients(11%) : type I, 24 patients(55%) ; type III, 4 patients (9%) i and mixed(II + III), 11 patients(25%). Average number of anatomic lesions of mitral valve per patient was 3.7. The techniques included prosthetic ring amluloplasty(44 patients, 32 Carpentier ring and 12 Duran ring), leaflet mobilization(24, 55%), chordae shortening(23, 52%), chordae transposition(23, 52%), commissurotomy(16, 35%), leaflet resection(9, 20%), papillary muscle splitting(8, 18%), and chordae reimplantation(1, 2%). Average 3.4 surgical procedures were applied on mitral valve per patient. There were two hospital mortality and one reoperation due to development of MR(grade III) after 2 weeks. During the mean follow up of 12 months, patients improved in terms of functional class of the New York Heart Association, which was mean 3.0 preoperatively and 1.3 postoperatively. Doppler echocardiographic studies showed adequate valve area(2.07$\pm$0.11 cm2 mean $\pm$standard error), improved ventricular contractiliy in 41 patients(93%), ab ence of MR in 23(53%), trace MR in 18(42%), and garde II MR in 2 patients(5%).

• The Korean Journal of Petroleum Geology
• /
• v.3 no.1 s.4
• /
• pp.16-27
• /
• 1995

The Early Miocene Temblor Formation forms an important sandstone reservoir at Kettleman North Dome oil field, California. Sandstones are mostly arkosic in composition except deepest sandstones containing much volcanic rock fragments. Arranged in paragenetic sequence prior to feldspar alteration, the Temblor sandstones contain cements of early calcite, dolomite, quartz, albite, mixed-layer ohloriteismectite (C/S) and smectite, and anhydrite. Diagenetic changes associated with feldspar are albitization of plagioclase, late calcite and laumontite cementation and grain replacement, plagioclase dissolution, and kaolinite cementation. Plagioclase albitization and late calcite and laumontite cementation in Temblor sandstones occurred at the time of maximum burial with temperatures up to $130^{\circ}C$. Volcanic plagioclases were selectively albitized. Most diagenetic changes are interpreted to have occurred before the maior uplift which occurred within the last one million years ago. Since then to the time of hydrocarbon emplacement plagioclase dissolution and kaolinite cementation occurred. This reaction occurred in relatively closed system due to the occurrence of kaolinite next to the site of plagioclase dissolution. Unaltered part of volcanic plagioclase and plutonic plagioclase which escaped albitization during maximum burial were preferentially dissolved to make plagioclase porosity. Secondary porosity resulting from dissolution of plagioclase and carbonate and anhydrite cements was mainly produced by formation waters containing organic acids released during atagenesis of organic matter.

• Journal of Animal Environmental Science
• /
• v.15 no.2
• /
• pp.107-114
• /
• 2009

Civil appeals on odor from swine barn have been increasing. This study was conducted to compile basic data of odor from swine barns as civil appeals on odor have been increasing. Odor was monitored from two gestating sow barns and the boundary of those barns in Suwon and Hwaseong city from June to November, 2008. Mean ammonia concentration measured at the boundary of A piggery in Suwon city was 0.9 ppm with occasional breaks of permissible limit (1.0 ppm). Mean concentrations of hydrogen sulfide and methyl mercaptan were 0.37 ppb and 0.01 ppb, which were lower than permissible limits of 20 ppb and 2 ppb, respectively. Mean ammonia concentration was 3.22 ppm and was maintained under 5.0 ppb. Ammonia concentration had increased since November when the barns were closed. Hydrogen sulfide and methyl mercaptan were lower than the permissible limits. Mean ammonia concentration measured at the boundary of B piggery in Hwaseong city was 16.3 ppm and steep increase of concentration was monitored after October when the barn was sealed up. Hydrogen sulfide and methyl mercaptan were 26.66 ppb and 7.45 ppb, respectively. In appropriate ventilation and raising environment would cause high ammonia concentration in swine barns. Emitted ammonia from barns and composting facilities were mixed, which would cause higher ammonia concentration on the boundary of barns. Hence improvement of raising environment, rapid manure treatment, and correct use of microbial preparation would be needed.

• Korean Journal of Food Science and Technology
• /
• v.32 no.2
• /
• pp.306-311
• /
• 2000

Lipid and cholesterol were extracted from beef and pork by the supercritical carbon dioxide $(SC-CO_2)$ for the manufacturing of low-lipid and low-cholesterol sausage. The ranges of extraction temperature and pressure were from 35 to $55^{\circ}C$ and from 103 to 375 bar, respectively. $SC-CO_2$ extraction yield of beef lipid increased as extraction pressure increased and/or extraction temperature decreased, while extraction temperature was more influential on the cholesterol extraction than pressure condition. When lipid and cholesterol of freeze-dried beef with varied moisture contents were extracted, their solubilities increased as the moisture content reduced. The extraction of lipid and cholesterol from pork was shown the same tendency as the beef. The chunk type of beef shape was more suitable for the lipid and cholesterol extraction than the powder type of beef. The color of meat after $SC-CO_2$ extraction was lighter than the raw freeze dried meat because of the extraction of color pigments. After $SC-CO_2$ extraction, beef and pork were rehydrated and mixed with raw beef and pork containing lipid and cholesterol. Their mixing ratio up to 50 : 50 did not affect physical properties of the sausage compared with the control sausage.

• Journal of the Korean Society of Food Culture
• /
• v.11 no.4
• /
• pp.439-454
• /
• 1996

The present study investigated Bul-Chun-Wi Sacrificial Ritual (sacrificial service which has been handed down from generation to generation to worship the family ancestors in the period of $1400{\sim}1800$) and foods for the sacrificial service among fourteen head families in Andong area. The findings are as follows; 1. In Bul-Chun-Wi Sacrificial Rituals, family shrine has been maintained in good shape, and the table, dishes, and foods used in the rituals have not been changed so much until these days. 2. While vegetable soup is widely used as soup, one family uses the seaweed soup, the other soup mixed with meat, fish, and vegetable. Specially soybean-powdered soup, which is the distinguishable food in Andong area, has been used. 3. As a basic Ddock, mainly Si-Ru-Ddock(a steamed rice cake), piled up to 13-15 stacks, is used. Additional 7-9 kinds of Ddock are placed on top of the basic Ddock. 4. For grilled-meat food(Geuck), eight families use the raw meat, and one family uses the half-cooked meat. Recently, five families have used the cooked meat. Mostly used ones are meat-Geuck, fish-Geuck, chicken-Geuck, and the Geuck are not served one by one. Instead the Geuck are stacked in one dish designed for Geuck in order of meats from poultry, animal, fish, and shell. As the sub-dishes for rice, raw and cooked Geuck are used. 5. The number of stew (Tang) are 3 to 6 and 5 stews is the most popular. Commonly used stews are meat stew, fish stew, chicken stew, vegetable stew, blood stew, and organs stew. For the vegetable stew, buckwheat gel can be used. 6. As the fruit, chinese date, pear, nut and dried persimmons are the basic ones. The even number of 6 or 8 colorful fruits are used, while the odd number of 7 or 9 colorful fruits are used in three head families. 7. As Sik-Hae which is a drink and made from fermented rice, rice Sik-Hae or fish Sik-Hae has been necessarily used. 8. As raw meat dish, the liver of cow or meat is used. As a wrapping materials, the reticulum of a ruminant, green seaweed or thinly fried egg can be used.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.5
• /
• pp.858-864
• /
• 2001

This study was performed to investigate the effect of sodium lactate (SL, 60%) and a mixed fat replacer (FR) on the product quality and shelf-life effect of low-fat bologna sausage (LFBS) in a model system during refrigerated storage. Low-fat and regular-fat bologna sausages had pH values ranged from 6.15 to 6.30 and water activity values ranged from 0.95 to 0.96. LFBS had a moisture content of 74~76%, <2% fat and 14~15% protein, whereas regular-fat bologna had 60% moisture, 22% fat and approximately 12% protein in the final products. Expressible moisture (%) increased (p<0.05) in all bolognas, resulting in the soft texture, as the storage time (weeks) increased. LFBS manufactured with SL and a FR had lower (p<0.05) the cooking loss (%) and had higher (p<0.05) texture profile analysis (TPA) values than the regular-fat counterpart. As the sodium lactate level increased up to 5% in the formulation of LFBS, vacuum purge and TPA hardness values also increased (p<0.05), but thiobarbituric acid (TBA) values decreased (p<0.05). Total plate counts of LFBS were reduced (p<0.05) when the addition level of 60% SL solution was more than 3.3%. This result indicated that the increased level of SL (>3.3%) in the combination of a FR in the formulation of LFBS improved the product quality and did inhibit the total microbial growth of LFBS during storage, as compared to the control.

• Journal of Family Relations
• /
• v.22 no.4
• /
• pp.181-204
• /
• 2018

Objectives: The aim of this study is to integrate the results of the previous studies from 1900 to 2016 according to the types of dependent variables individually and statistically to obtain the results of the overall level of the marital education program I need to figure it out. In other words, the general and valid study on the overall effectiveness of the marriage education program will lead to more concluded conclusions and draw up an integrated and holistic conclusion about the effectiveness of the marriage education program. Method: The purpose of this study was to investigate the effect of married couples' education program on married couples' education program. The results of this study are as follows. First, Comprehensive Meta-Analysis. In other words, funnel plot, forest plot, and trim & fill were used to analyze all the variables related to the education of the couple, and homogeneity test After choosing an analytical model for the analysis, we calculated the 'standardized mean difference' effect size (d) that can compare different individual studies through the analytical model. The results of this study are as follows. Results: The purpose of this study was to investigate the overall effect size of domestic couples education programs after 1990, and to investigate the effect sizes of dependent variable types and program - related variables. First, the total effect size of the domestic marriage education program was close to the level of the large effect size and had a substantial and preventive effect. Self-esteem, communication, marital adjustment, emotion, and self control have a substantial and prophylactically significant change depending on the type of subordinate variables related to the marital education program But there was no change in origin family and life satisfaction. Third, as a result of the categorization of the dependent variable categorization of the Korean couple education program, it was found that the marital relations of the participant in the individual inner and the marital relations The effect was significant enough to change. Fourth, Korean couple education program was most effective when mixed age couples were participated in various family life cycle. Conclusions: Based on the results of this study, it is necessary to study more deeply about marital education program effect of marriage education for various special groups such as married couples who are in a crisis of divorce, . It also means that the results of the research for the last 30 years from 1900 to 2016 were comprehensively and systematically summarized through meta - analysis. The results of this study provide information on how to provide the most effective couples education programs for practitioners in the field. The result of this study will be the data of judgment about how to organize the marital education program for people of any ages and characteristics in the future.

• Journal of Korea Port Economic Association
• /
• v.25 no.2
• /
• pp.57-72
• /
• 2009

The purpose of this paper is to show the empirical measurement way of operation risk evaluation in domestic seaports for overcoming the limitations which the traditional DEA method has by using 13 Korean ports in 2003 for 4 inputs(birthing capacity, cargo handling capacity, number of coastal guard vessel, number o f coastal special guard vessel ) and 5 outputs(Export and Import Quantity, Number of Ship Calls, number of coastal accident, number of coastal crime, number of coastal pollution). Because traditional DEA method has produced the limited set of information, negative DEA mixed with tier, stratification and layering methods should be adopted. The goal of negative DEA is to set up DEA models that will place the poor operating ports on or close to the empirical frontier. The core empirical results of this paper are as follows. First, Donghae ports should benchmark the operation way of Yeasu, Busan, Woolsan ports in terms of the middle and longterm base. Second, 5 ports(ports of Taean, Yeasu, Tongyoung, Busan, Sokcho) which were revealed as the poor operating ports in Negative DEA analysis should benchmark Incheon, Woolsan, Pohan, and Donhae ports. The policy implication to the Korean seaports and planners is that Korean seaports should introduce the new methods like Negative DEA of this paper for predicting the poor operating in the ports.