• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.87-87
• /
• 2018

다이아몬드 상 탄소(diamond-like carbon, DLC)는 상당량의 $sp^3$ 결합을 가지는 비정질 탄소(a-C) 또는 수소화 비정질 탄소(a-C:H)로 이루어진 준안정 형태의 탄소이다. DLC는 전기 저항과 굴절률이 높고 화학적으로 다른 물질과 반응하지 않으며, 마찰계수가 낮고 경도가 높아 자기 디스크, 광학 소자 등의 다양한 분야에서 적용되고 있다[1,2]. 또한 다이아몬드에 비해 상온에서 성장이 가능할 정도로 합성온도가 낮아 적용 기판의 제한이 거의 없고, 증착 방법과 조건에 따라 탄소 결합의 다양성과 비정질성이 변화하기 때문에 넓은 범위의 특성을 얻을 수 있는 장점이 있다. 지금까지 DLC 박막의 광학적 특성, 특히 굴절률, 광학적인 에너지 밴드 갭, 자외선과 적외선 투과성에 대해서는 많은 연구가 진행되었으나 가시광선의 투과성에 대한 연구는 제한적이며[4], 가시광선 투과도 개선에 대한 연구는 전무하다. 본 연구에서는 ITO 기판 위에 DLC를 합성하고 기계적 특성과 가시광선 영역 투과도를 조사하였다. RF-PECVD(radio frequency plasma enhanced chemical vapor deposition) 방법에 의해서 $C_2H_2+Ar$ 혼합 가스 비율과 $C_2H_2+N_2$ 혼합 가스 비율을 변화시켜 ITO 기판 위에 DLC 박막을 합성하였다. 공정 압력과 rf-power, 증착시간, 기판온도는 0.2 torr, 40 W, 5 분, $50^{\circ}C$로 고정하고, 공정 가스는 $C_2H_2+Ar$과 $C_2H_2+N_2$가 200 sccm이 되도록 비율을 변화하였다. $C_2H_2:Ar$과 $C_2H_2:N_2$의 비율은 180 : 20, 160 : 40, 140 : 60, 120 : 80, 100 : 100이 되도록 가스의 유량을 조절하였다. 투과도는 가시광선(380 ~ 780 nm) 범위에서 측정하였고 두께와 표면조도는 AFM으로 측정하였다. 투과도는 $C_2H_2+Ar$의 Ar 가스 비율이 증가할수록 증가해 140 : 60일 때 최댓값을 나타낸 후 다시 감소하였다. $C_2H_2+N_2$ 투과도는 $N_2$ 가스 비율이 증가할수록 감소하는 경향을 나타내었다. 표면 거칠기는 $C_2H_2+Ar$ 혼합 가스를 사용한 경우의 Ar의 가스 비율이 증가할수록 증가하였다. 그러나 $C_2H_2+N_2$ 혼합 가스를 사용한 경우에는 $N_2$ 가스의 혼합 비율이 증가할수록 감소하였다.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.16 no.3
• /
• pp.38-67
• /
• 2003

The burn is acute skin injury caused by fire, hot water. steam. hot oil, sour and salty. It is occurred frequently in the daily life as well as oriental therapy like moxibustion therapy, physical therapy. Nevertheless, medical treatment of the burn is almost dependent on western cure. So we chose the oriental medicine textbooks and the oriental medicine journals that were dealing with the drugs, processing the drugs. peculiar treatment put first external cure. The results were as follows; 1. The burn is acute skin injury caused by fire, hot water, steam, hot oil, sour and salty. 2. The burn cause blisters, irritability and restlessness, nausea, dryness of mouth, constipation, in case of serious, coma, dyspnea and death. The early stage of the burn, blisters form by skin damage and they burst into skin ulceration from which pus issues, the latter term, the wound form scab and healed up. 3. In a light case, medical treatment of the burn was used external treatment by medicine for externalism use, in a serious case, it was used both as an internal remedy and medicine for outward application. Also in the early stage, it was careful of using the cold and cool medicine, as the process of healing, it was used alleviating pain, detoxicating, moistening the skin, growing muscle and skin, convergence, evacuating pus, regeneration of the tissue, strengthen the spleen and nourishing the stomach. 4. The external treatment medication is Herba Ephedrae Oil(麻油), Radix ET Rhizoma Rhei(大黃), Glauberitum(寒水石), Water(水), Pig OiI(猪油), Pig Fat(猪脂), Radix Angelicae Gigantis(當歸), Rhizoma Coptidis(黃連), Cortex Phellodindri(黃栢). The White of an Egg(鷄子淸), Raw Honey(生蜜), Honey(蜜), Wine(酒), Etc. It is mostly the cold and cool medications. 5. Soft extracted and powered dosage form in external treatment is much used. The soft extracted form(32times used) are mostly Chung Ryang paste(淸凉膏) and Fructus Papaveris paste(罌粟膏). The powered form(30times used) are mostly Bingsang Powder(氷霜散), Bosaenggugo Powder(保生救苦散), Sahwang Powder(四黃散). The others is much a various powder adding solvent. 6. If varicella stage, erosion after varicella stage, oozing stage and extreme pain stage, the powder adding solvent is much used. If little oozing stage. ulcering stage, scabing stage and a chronic stage, Soft extracted dosage form is much used. 7. The most many(26.65%) used method is that apply each medication power mixed water(水), wine(酒), honey(蜜) in a wounded part.

• Journal of the Korean Chemical Society
• /
• v.38 no.8
• /
• pp.547-551
• /
• 1994

A series of samples in the $Nd_{1-x}Ba_xFeO_{3-y}$ system has been prepared by heating the reactants to$1200^{\circ}C$ under an ambient atmosphere, and the solid solutions were identified by X-ray power diffraction analysis. The crystal systems of samples with x = 0.00 and 0.25 were found to be orthorhombic whose local symmetry is similiar to the distorted octahedral with orthoferrite type one, whereas those with x = 0.50 and 0.75 to be the cubic system. Since Fe ions in the solid solutions are a mixed valence state between $Fe^{3+}\;and\;Fe^{4+}$ ions, the nonstoichiometric chemical formulas could be determined from the mole ratio of $Fe^{4+}$ ion and oxygen vacacies. According to the Mossbauer spectroscopic analysis, the presence of 5-coordinated $FeO_5$ was evidenced only in the barium compounds along with $FeO_6,\;and\;FeO_4$, but not in the strontium and calcium compounds. The samples with x = 0.25 and 0.50 show a spectrum of superparamagnetism, which might be due to the formation of a domain of the ferromagnetic interaction between the $Fe^{3+}\;and\;Fe^{4+}$ ions. The electrical conductivities of all samples are within semiconducting range. Since the $Fe^{4+}$ ion acts as an electron acceptor level during the electron transfer between the Fe through intermediate $O^{2-}$ ions, the activation energy of the compounds decreases with the increment of $Fe^{4+}$ content.

• Journal of Veterinary Clinics
• /
• v.30 no.3
• /
• pp.214-217
• /
• 2013

A 3-year-old intact female hedgehog (Atelerix albiventris) was presented for evaluation of mandibular swelling. Fine needle aspiration of swollen mandibular was performed and smears were stained with Romanowsky type stain for cytological evaluation. Smears were highly cellular with predominance of variably shaped keratinized or non keratinized squamous cells with low numbers of spindloid to abnormally elongated cells. Cytologic impression was squamous cell carcinoma. The mass was surgically removed for histological examination. Microscopically tortuous and anastomosing delicate to broad pegs and nests of neoplastic squamous epithelial cells were supported by a moderate collagenous and spindloid fibroblast stroma. Tumor cells had moderate anisocytosis and mild anisokaryosis and range from moderately to well keratinized, with areas of intratumoral acantholysis accompanied by mixed stromal lymphoplasmacytic, neutrophilic inflammation. The mitotic index is 2-3 per high-power field. Tumor cells were expanding the subcutis subjacent to the layer of skeletal muscle and incorporating the osseous tissue fragments. The final diagnosis was squamous cell carcinoma. The patient survived three months after surgery without any further medical treatments.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.1
• /
• pp.58-63
• /
• 2010

The glass-ceramics made from the mixture of coal bottom ash, produced from a thermal power plant mixed with $Na_2O$ and $Li_2O$ was fabricated and their crystallization behavior was studied using a non-isothermal analyzing method. The temperature for 50% crystallization was higher than the exothermic peak temperature $T_p$ at DTA curve and the quickest crystallization temperature was much the same as $T_p$ as identified from the relationships of crystallized fraction and crystallization rate with temperature. By using Kissinger equation describing a crystallization behavior, the activation energy (262 kJ/mol), the Avrami constant (1.7) and the frequency ($5.7{\times}10^{16}/s$) for crystallization were calculated from which the nepheline crystal could be expected as showing an 1~2-dimensional surface crystallization behavior mainly with some bulk crystallization tendency at the same time. The actual observation of microstructure using SEM showed the considerable amount of surface crystals of dendrite and the bulk crystals with low fraction, so the prediction by the Kissinger equation was in accord with the crystallization behavior of glass-ceramics fabricated in this study.

• Membrane Journal
• /
• v.21 no.4
• /
• pp.367-376
• /
• 2011

Huge amount of $CH_4$ mixtures has been emitted from landfills and organic wastes via anaerobic digestion. The recovery of high purity $CH_4$ from these gases has two merits: reduction of green house gases and production of renewable fuels. Membrane technology based on polymeric materials can be used in this application. In this study, asymmetric gas separation hollow fiber membranes were fabricated to develop the membrane-based bio-gas purification process. Polyethersulfone (PES) was chosen as a polymer materials because of high $CO_2$ permeability of 3.4 barrer and $CO_2/CH_4$ selectivity of 50[1]. Acetone was used as a non-solvent additive because of its unique swelling power for PES and highly volatile character. The prepared PES hollow fiber showed excellent separation properties: 36 GPU of $CO_2$ permeance and 46 of $CO_2/CH_4$ selectivity at optimized preparation conditions: 9wt% acetone content, 10cm air-gap and 4wt% PDMS coating processes. With the PES hollow fiber membranes developed, mixed $CO_2/CH_4$ test was done by changing various operating conditions such as pressures and feed compositions to meet the highest recovery of CH4 with 95% purity. High $CH_4$ recovery of 58 wt% was observed at 10 atm feed pressure for the 50 vol% of $CO_2$ in $CO_2/CH_4$ mixture.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.5
• /
• pp.663-669
• /
• 2013

To improve the use of ginseng flower-buds, antioxidant activities of ginseng flower-buds fermented using a variety of useful microorganisms were analyzed. Non-fermented grape pomace was used as a control, while fermentation was carried out using Bacillus subtilis (BS), Lactobacillus plantarum (LP), Lactobacillus casei (LC), Candida utilis (CU), Saccharomyces cerevisiae strain CHY1011 (Y1), Saccharomyces cerevisiae strain ZP 541 (Y2), and a mixed-strain culture with LP, LC, and CU (M). The total polyphenol content of ginseng flower-buds was highest in the control compared to the other fermented ginseng flower-buds. DPPH radical and ABTS radical scavenging activity were also highest in fermented group by BS. The FRAP value (10 mg/mL) was highest in the control group but did not show a significant difference in the fermented group by BS. The highest reducing power activity was in the fermented group by LC compared to the other group, including the control. Therefore, the fermentation of ginseng flower-buds using various microorganisms, shows that fermentation with the Bacillus subtilis strain increases antioxidant activity. More research of its effects on other physiological activities will be needed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.3
• /
• pp.214-218
• /
• 2020

In this study, Mg_xZn_1-xO thin films, which can be applied not only to active layers of light-emitting devices (LEDs), such as UV-LEDs, but also to solar cells, high mobility field-effect transistors, and power semiconductor devices, are fabricated using the sol-gel method. ZnO and Mg_0.3Zn_0.7O solution synthesized by the sol-gel method and the thin film were grown by spin coating on a Si (100) substrate and sapphire substrate. The solutions are synthesized by dissolving precursor materials in 2-methoxyethanol (2-ME) solvent, and then monoethanolamine (MEA) was added to the mixed solution as a sol stabilizer. Zinc acetate dihydrate is used as a ZnO precursor, while Mg nitrate hexahydrate and Mg acetate tetrahydrate are used as an MgO precursor. Then, the optical and structural characteristics of the fabricated thin films are compared. The molar concentration of the Zn precursor in the solvent is fixed at 0.3 M, and the amount of the Mg precursor is 30% of Mg²⁺/Zn²⁺. The optical characteristics are measured using an UV-vis spectrophotometer, and the transmittance of each wavelength is measured. Structural characteristics are measured using X-ray diffraction (XRD) and transmission electron microscopy (TEM). Composition analyses are performed using energy dispersive X-ray spectroscopy (EDS). The Mg_0.3Zn_0.7O thin film was well formed at the ratio of the Mg precursor added regardless of the type of Mg precursor, and the c-axis of the thin film was decreased, while the band gap was increased to 3.56 eV.

• Applied Chemistry for Engineering
• /
• v.31 no.2
• /
• pp.153-163
• /
• 2020

Compared to gaeous hydrogen, liquid hydrogen has approximately 1/800 volume, 800 times higher volumetric energy density at the same pressure, and the advantage of lower explosion risk and easier transportation than gaseous hydrogen. However, hydrogen liquefaction requires larger scale facility investment than simple compression storage method. Therefore, the research on energy-saving hydrogen liquefaction processes is highly necessary. In this study, helium/neon (mole ratio 80 : 20) refrigeration cycle was investigated as the main refrigeration process for hydrogen liquefaction. Process simulation for less energy consumption were carried out using PRO/II with PROVISION V10.2 of AVEVA. For hydrogen liquefaction, energy consumption was compared in three cases: Using a helium/neon refrigerant cycle, a SMR+helium/neon refrigerant cycle, and a C3-MR+helium/neon refrigerant cycle. As a result, the total power consumptions of compressors required to liquefy 1 kg of hydrogen are 16.3, 7.03 and 6.64 kWh, respectively. Therefore, it can be deduced that energy usage is greatly reduced in the hydrogen liquefaction process when the pre-cooling is performed using the SMR process or the C3MR process, which have already been commercialized, rather than using only the helium/neon refrigeration cycle for the hydrogen liquefaction process.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.3
• /
• pp.478-485
• /
• 2014

This study is to form the self assembly of cubic crystalline phase to penetrate into the skin epidermis. The various performance synthesized diglyceryl phytylacetate (DGPA) having hydroxyl group (-OH) and 4 methyl chains with phytyl group was carried out as an amphoteric lipid such as emulsifying power, self assembly. Emulsifying activity of DGPA was very stabilized on only 1% of small content, it could make a W/O emulsion containing high internal phase incorporated with water. Cubic liquid crystal structure with DGPA on three-phase diagram was formed, when mixed DGPA, dimethicone (2CS), and water. Through three-phase diagram forming the cubic liquid crystal area, hexagonal structure zone, and mixing water phase and hexagonal structure area, reversed micelle area were respectively certified. Its structure was proved by the SAXS (small angled x-ray scattering) analysis. As an application, formation of cubosome containing 10% of magnesium ascorbylphosphate and 5% of pyridoxine tris-hexyldecanoate was encapsulated. Occlusive effect of cubosome had above 1.7 times better than reversed micelle. From using poloxamer of dispersing agent, phase structure recovered from W/O emulsion to cubic liquid crystal phase when storage in $33^{\circ}C$ incubator. Therefore, our this study is expected to be as epidermal-dermal skin absorbers in skin care cosmetics and pharmaceuticals industries as raw materials to form a cubic crystal phase through a more in-depth research to DGPA having amphoteric lipid property.