• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.136-143
• /
• 2016

There are various method for evaluating the durability life of concrete structures due to salt damage. The best way is to perform a corrosion test for a rebar embedded in concrete specimen was exposure to marine environment. However, this method has the disadvantage that it takes a long period of time. Also, accelerated corrosion test which was complemented complements the time-consuming weakness is limited to apply because it could not reveal a correlation between long-term exposure test. Accordingly, the purpose of this study is to derive a correlation coefficient between cycle drying-wetting accelerated corrosion test and long-term exposure test. Corrosion initiation time was measured in four types of concrete samples, i.e., two samples mixed with fly ash(FA) and blast furnace slag(BS), and the other two samples having two water/cement ratio(W/C = 0.6, 0.35) without admixture(OPC 60 and OPC 35). The accelerated corrosion test was carried out by two case, i.e., one is a cyclic drying-wetting method(case 1), and the other is a artificial seawater ponding test method(case 2). Whether corrosion occurs, it was measures using half-cell potential method. The results indicated that case 1 is to accelerated the corrosion of rebar about 24~36% as compared with case 2, then the corrosion of rebar embedded in concrete occurred according to the order of OPC60, FA, BS, OPC35. Correlation coefficient between accelerated corrosion test and long-term exposure test, case 1 is 4.23 to 5.42, and case 2 is 6.54 to 7.82.

• Korean Journal of Weed Science
• /
• v.15 no.2
• /
• pp.131-140
• /
• 1995

This experiment was conducted to test the effect on germination and seedling growth of major industrial crops and weed control potential using alfalfa plant. When dried alfalfa residues were mixed into vermiculite, germination, length of shoot and root of crops, such as Perilla frutescens, Sorghum nevosum, Platycodon grandiflorum and weeds, Digitaria saguinalis, Setaria viridis, Siegesbechia pubescens, Ammaranthus lividus, and Solanum nigrum, were significantly inhibited as the dried residue concentration increased. More than 10% concentration of the dired residue caused 80% germination and growth inhibition. The fresh alfalfa exudation also inhibited the germination and seedling growth of crop, barley, rye, alfalfa, and sesame, and weeds, Echinochloa crus-galli, Siegesbechia viridis, and Portulaca oleracea. The degree of inhibition showed the different response according to the fresh exudation concentration, types of crops and weeds. Generally, as the exudation concentration increased, the germination and seedling growth of crops and weeds inhibited. The exudation of dried residue also exhibited the strong inhibition effect on germination and seedling growth of crops, alfalfa, Platycodon grandiflorum, barley, sesame, rye and weeds, D. sanguinalis, S. pubescens, S. viridis, P. oleracea, E. crus-galli, At the 10% concentrations, S. pubescens, and P. oleracea were not germinated and showed only 15% germination in the S. viridis. From this study, would conclude that alfalfa plant contained water soluble phytotoxic substances which were inhibitory to weeds and crops. This results suggest that alfalfa had some possibility to control some weed species using toxic compounds like natural herbicide.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3345-3350
• /
• 2014

We investigated to assess the relationships between the major nutrients and phytoplankton dynamics during the spring season in 2010 and 2011 at 23 stations in Jinhae Bay, Korea. The bay is divided into four different zones based on pollutant sources and geographical characteristics. Nutrient limitation (>80%) was significant in Zone II, which is located in central bay and is influenced by the water well mixed from outer bay. The limited nutrient was followed in Zone III and IV that was occupying between 17% and 83%. However, the low levels are being kept below 35% in Zone I, which is characterized by the semi-enclosed eutrophic area of Masan and Haegam bays. Based on the PCA (principle component analysis) analysis, the nitrogen (N) sources in 2010 were particularly dominant and it may be due to the water mixing and wastewater formed from bottom layers and sewage. In 2011, major nutrients including nitrogen, silicon and phosphorus were dominant in the bay and are supplied by the river discharge after rainfalls with low salinity conditions. In particular, the N nutrients being supplied in 2010 are correlated with pennate diatoms Pseudo-nitzchia spp. and is not related to the phytoplankton population densities in 2011. The present study suggests that N sources play an important role in the proliferation of diatom, and the rapid nutrient uptakes by them are potential nutrient limitation factors in the bay.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.4
• /
• pp.334-340
• /
• 2016

The combustion chamber of a diesel engine is often exposed to a more serious wear and corrosion environment than other parts of the engine because its temperature increases as a result of using heavy oil of low quality. Therefore, repair and built-up welding methods must be performed on worn or corroded parts of the piston crown, exhaust valve, etc. from an economical point of view. In this study, Inconel 718 filler metal was used in repair welding on the groove of a forged steel specimen for a piston crown, along with built-up welding on the surface of another forged steel specimen. Then, the corrosion characteristics of the weld metal zone for the repair welding and the deposited metal zone for the built-up welding were investigated using electrochemical methods in a 35% H₂SO₄ solution. The deposited metal zone indicated better corrosion resistance than the weld metal zone, showing a nobler corrosion potential, higher impedance, and smaller corrosion current density. It is considered that metal elements with good corrosion resistance were generally included in the filler metal, and these elements were also greatly involved in the deposited meta by built-up welding, whereas the weld metal consisted of metal elements mixed with both the filler metal and base metal elements because of the molten pool produced by the repair welding. Finally, it is considered that the hardness of the weld metal was increased by the repair welding, whereas the built-up welding improved the corrosion resistance of the deposited metal.

• Food Engineering Progress
• /
• v.14 no.1
• /
• pp.35-40
• /
• 2010

Electronic nose (E-nose) was assessed for grading pungency of powdered red pepper. Complex pretreatments are not required for flavor analysis unlike HPLC or Scoville tests. Mild and pungent taste of powdered red pepper were mixed at various concentrations of 0, 25, 50, 75, and 100%. Those were analyzed using mass spectrometer-based E-nose. Discriminant function analysis (DFA) was conducted on E-nose data. The $R^{2}$ and F-value of dicriminant function first score (DF1) were 0.9946 and 355.65, respectively, when the samples were separated by a relative degree of pungent taste. DF1 value decreased with increasing the amount of powdered red pepper with a pungent taste. It is similar to the increase in the concentration of capsaicin. Increasing the amount of red pepper powder, dicriminant function second score (DF2) values were moved from the negative position into the positive position. The $R^{2}$ and F-value of DF1 were 0.9890, 165.17 and DF2 were 0.9219, 21.64. Also, the results by MS based E-nose agreed to that by HPLC. There is the potential to grade pungent taste of powdered red pepper using the E-nose.

• Journal of the Korean Electrochemical Society
• /
• v.22 no.4
• /
• pp.148-154
• /
• 2019

Vanadium oxide based materials have been studied as novel negative electrode materials in lithium-ion batteries (LIBs) because of their high specific capacity. In this study, potassium metavanadate ($KVO_3$) was synthesized and its electrochemical properties are evaluated as a negative electrode materials. The aqueous solution of $NH_4VO_3$ is mixed with a stoichiometric amount of KOH. The solution is boiled to remove $NH_3$ gas and dried to obtain a precipitate. The obtained $KVO_3$ powders are heat-treated at 300 and $500^{\circ}C$ for 8 h in air. As the heat treatment temperature increases, the initial reversible capacity decreases, but the cycle performance and Coulombic efficiency are improved slightly. On the contrary, the electrochemical performances of the $KVO_3$ electrodes are greatly improved when a polyacrylic acid (PAA) as binder was used instead of polyvinylidene fluoride (PVDF) and a fluoroethylene carbonate (FEC) was used as electrolyte additive. The initial reversible capacity of the $KVO_3$ is 1169 mAh/g and the Coulombic efficiency is improved to 76.3% with moderate cycle performance. The $KVO_3$ has the potential as a novel high-capacity negative electrode materials.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.1
• /
• pp.17-25
• /
• 2001

High salt content in food waste limit use as the potential source of compost. Since sodium chloride content should be lower than one percent to meet requirement for agricultural use of compost, we attempted use of three kinds of co-composting material for food wastes compost, which were fermented, dried, and fresh types of amendments which included pig manure, sawdust and puffed rice hull. Food wastes were composted well and stabilized after around the 40th days of composting. Little difference were found between composts amended sawdust and puffed rice hull. The result indicated that puffed rice hull could be used as a good alternative of sawdust. Because sawdust or puffed rice hull were mixed as amendments to control water contents and to dilute high NaCl content of compost material, the C/N ratios of the final products were significantly high over 40. However, NaCl contents of final products were dropped to less than percent on the fresh weight basis by mixing food wastes and the above amendments with the optimum rates.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.6
• /
• pp.736-743
• /
• 2015

Organic matter plays important roles in soil ecosystem in terms of carbon and nitrogen cycles. Due to recent concerns on climate change, carbon sequestration in agricultural land has become one of the most interesting and debating issues. It is necessary to understand behavior of soil carbon for evaluating decomposition or sequestration of organic matter and analyzing potential carbon decomposition pattern about the kinds of organic matter sources to cope with well. In order to evaluate decomposition of soil carbon according to organic material during cultivating rice in paddy field, we treated organic material such as hairy vetch, rice straw, oil cake fertilizer, and manure compost at $50{\times}50{\times}20cm$ blocks made of wood board, and analyzed carbon contents of fulvic acid and humic acid fraction, and total carbon periodically in 2013 and 2014. Soil sampling was conducted on monthly basis. Four Kinds of organic matter were mixed with soil in treatment plots on 2 weeks before transplanting of rice. The treatment of animal compost showed the highest changes of total carbon, which showed $7.9gkg^{-1}$ in May 2013 to $11.6gkg^{-1}$ in October 2014. Fulvic acid fraction which is considered to easily decompose ranged from 1 to $2gkg^{-1}$. Humic acid fraction was changed between 1 to $3gkg^{-1}$ in all treatments until organic material had been applied in 2014. From May to August in the second year, the contents of humic acid fraction increased to about $4gkg^{-1}$. The average of humic fraction carbon at treatments of animal compost was recorded highest among treatments during two years, $2.1gkg^{-1}$. The treatment of animal compost has showed the lowest ratio of fulvic acid fraction, humic acid fraction compared with other treatments. The average ratio of fulvic fraction carbon in soil ranged from 16 to 20%, and humic fraction carbon ranged from 19 to 22%. In conclusion, animal compost including wood as bulking agent is superior in sequestrating carbon at agricultural land to other kinds of raw plant residue.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3367-3378
• /
• 2021

The design phase and safety assessment of Generation IV liquid metal-cooled fast reactors calls for the improvement of fuel pin performance codes, in particular the enhancement of their predictive capabilities towards uranium-plutonium mixed oxide fuels and stainless-steel cladding under irradiation in fast reactor environments. To this end, the current capabilities of fuel performance codes must be critically assessed against experimental data from available irradiation experiments. This work is devoted to the assessment of three European fuel performance codes, namely GERMINAL, MACROS and TRANSURANUS, against the irradiation of two fuel pins selected from the SUPERFACT-1 experimental campaign. The pins are characterized by a low enrichment (~ 2 wt.%) of minor actinides (neptunium and americium) in the fuel, and by plutonium content and cladding material in line with design choices envisaged for liquid metal-cooled Generation IV reactor fuels. The predictions of the codes are compared to several experimental measurements, allowing the identification of the current code capabilities in predicting fuel restructuring, cladding deformation, redistribution of actinides and volatile fission products. The integral assessment against experimental data is complemented by a code-to-code benchmark focused on the evolution of quantities of engineering interest over time. The benchmark analysis points out the differences in the code predictions of fuel central temperature, fuel-cladding gap width, cladding outer radius, pin internal pressure and fission gas release and suggests potential modelling development paths towards an improved description of the fuel pin behaviour in fast reactor irradiation conditions.

• Nutrition Research and Practice
• /
• v.15 no.6
• /
• pp.715-731
• /
• 2021

BACKGROUND/OBJECTIVES: Premenstrual syndrome (PMS) is a disorder characterized by repeated emotional, behavioral, and physical symptoms before menstruation, and the exact cause and mechanism are uncertain. Hyperprolactinemia interferes with the normal production of estrogen and progesterone, leading to PMS symptoms. Thus, we judged that the inhibition of prolactin hypersecretion could mitigate PMS symptoms. MATERIALS/METHODS: Hordeum vulgare L. extract (HVE), Chrysanthemum zawadskii var. latilobum extract (CZE), and Lomens-P0 the mixture of these extracts were tested in subsequent experiments. The effect of extracts on prolactin secretion at the in vitro level was measured in GH3 cells. Nitric oxide and pro-inflammatory mediator expression were measured in RAW 264.7 cells to confirm the anti-inflammatory effect. Also, the hyperprolactinemic Institute for Cancer Research (ICR) mice model was used to measure extract effects on prolactin and hormone secretion and uterine inflammation. RESULTS: Anti-inflammatory effects of and prolactin secretion suppress by HVE and CZE were confirmed through in vitro experiments (P < 0.05). Treatment with Lomens-P0 inhibited prolactin secretion (P < 0.05) and restored normal sex hormone secretion in the hyperprolactinemia mice model. In addition, extracts significantly inhibited the expression of pro-inflammatory biomarkers, including interleukin-1𝛽, and -6, tumor necrosis factor-𝛼, inducible nitric oxide synthase, and cyclooxygenase-2 (P < 0.01). We used high-performance liquid chromatography analyses to identify tricin and chlorogenic acid as the respective components of HVE and CZE that inhibit prolactin secretion. The Lomens-P0, which includes tricin and chlorogenic acid, is expected to be effective in improving PMS symptoms in the human body. CONCLUSIONS: The Lomens-P0 suppressed the prolactin secretion in hyperprolactinemia mice, normalized the sex hormone imbalance, and significantly suppressed the expression of inflammatory markers in uterine tissue. This study suggests that Lomens-P0 may have the potential to prevent or remedy materials to PMS symptoms.