• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.6
• /
• pp.1032-1038
• /
• 2009

This study describes the production of functional Ssukgaen Dduk though the addition of yam and mugwort to Goami 2, a healthy diet and diabetes. In this study, the rice is soaked for many hours and the particle size distribution of the rice was determined as a function of the water-soaking time. The produce Ssukgaen Dduk was repeated after the addition of varying concentration of yam. Non-glutinous rice was soaked for 4, 8, 12 hours and the Goami 2 rice was soaked for 4, 8, 12, 16, 20 hours and ground to a powder and passed through a 18~30 mesh sieve to determine the particle size distribution of the rice as a function of water-soaking time. Using this approach, optimal soaking time for Dduk was found to be 4 hours for non-glutinous rice(pass rate of 30 mesh: 58.29%) and 12 hours for Goami 2(pass rate of 30 mesh: 87.88%). When Ssukgaen Dduk made with Goami 2 rice powder only and those made with varying amounts of yam(10%, 20%, 30%, and 40%) were subjected to the sensory test, the control group(non-glutinous rice Ssukgaen Dduk) had the highest preference in general(3.73). Out of Ssukgaen Dduk containing yam, the S4 group, which contained 30% yam, had the highest preference(2.87) In addition the S4 group also had the highest extent of soft, and delicacy of texture general preference of S5, 40% the lowest(2.37), S1 only Goami 2 the hardness(112.59), as 91.46 lower (83.85) yam increased, the less hard the texture Ssukgaen Dduk. In conclusion Ssukgaen Dduk though the addition of mugwort and yam to the Goami 2 rice, it would be better to add 30% yam to 70% Goami 2 rice powder mixed with mugwort.

• Korean Journal of Agricultural Science
• /
• v.40 no.3
• /
• pp.203-208
• /
• 2013

Differences in the filling amount of substrates in container can influence severely on the soil physical properties and crop growth. This research was conducted to secure the fundamental informations related to the changes in soil physical properties as influenced by the filling amount of coir dust-based substrates in container. For the experiment, three substrates were formulated by blending coir dust (CD) with expanded rice hull (CD+ERH, 8:2, v/v), carbonized rice hull (CD+CRH, 6:4, v/v) or ground and aged pine bark (CD+GAPB, 8:2, v/v). Based on the optimum bulk density, the amount of substrates filled in 347.5mL aluminum cylinder were adjusted to 90, 100, 110, 120, and 130%. Then the changes in total porosity (TP), container capacity (CC), and air-filled porosity (AFP) by various filling amounts were measured. The TP decreased linearly in CD+ERH and CD+GAPB and quadratically in CD+CRH as the filling amounts of the media increased from 90% to 130%. The CC in CD+ERH and CD+GAPB media increased as the filling amount increased from 90% to 120%, then decreased in 130%, showing quadratic change. The CC in CD+CRH was the highest in 90% filling amount and decreased gradually as the filling amount of root medea increased. The AFPs in CD+ERH and CD+GAPB media were 38 and 37%, respectively in 90% filling amount and they decreased drastically until 110% filling, then gradually in 120 and 130% filling amount showing the quadratic changes. The AFP of CD+CRH at 90% filling amount was 22% and it decreased as the filling amount increased until 130%, showing linear change. These results indicate that the increase in filling amount of substrates influenced more severely the AFP than CC, and careful consideration on container filling is required to provide a better root condition thus maximize crop growth.

• Korean Journal of Crystallography
• /
• v.14 no.1
• /
• pp.1-6
• /
• 2003

NiZn-ferrites were synthesized from the waste catalysts. which were by product of styrene monomer process and buried underground as an industrial wastes, and their magnetic properties were investigated. Nickel oxide and zinc oxide powders were mixed with finely ground waste catalysts, and spinel type ferrite was obtained by calcination at 900℃ and sintering at 1325℃ for 5 hours. The initial permeabilities were measured and reflection losses were calculated from S-parameters for the composition of Ni/sub x/Zn/sub 1-x/Fe₂O₄(x=0.36, 0.50, 0.66) and (Ni/sub 0.5/Zn/sub 0.5)/sub 1-y/Fe/sub 2+y/O₄(y=-0.02, 0, 0.02).

• Journal of the Korean Chemical Society
• /
• v.38 no.7
• /
• pp.502-508
• /
• 1994

The measurement of trace amounts of uranium(VI) and thorium(VI) in the solutions containing high concentration of dissolved salts was carried out. The procedure using reversed phase liquid chromatography with trace enrichment techniques has been developed to cope with the high salt content of the samples. 2 ml of sample were passed through a small C_{18}$ reversed phase enrichment column with ${\alpha}$-HIBA eluent (0.11 M, pH 5.5) where the uranium and thorium were separated from other constituents and concentrated. The uranium and thorium were then backflushed from the column onto a deactivated C_{18}$ reversed phase analytical column where furthe separation was achieved with a mixed eluent (pH3.0, 0.17M ${\alpha}$-HIBA/0.0038 M 1-pentanesulfonate). The separated species were determined spectrophotometrically by postcolumn reaction with Arsenazo III, the chromogenic reagent. Detection limits were found within 1 ppb range for both species.

• Journal of the Korean Ceramic Society
• /
• v.38 no.12
• /
• pp.1162-1166
• /
• 2001

NiZn-ferrite was synthesized from waste catalysts, which were produced from styrene monomer process and buried underground as an industrial wastes, and its magnetic properties were investigated. Nickel oxide and zinc oxide powders were mixed with finely ground waste catalysts, and spinel type ferrite was obtained by calcination at 900$\^{C}$ and sintering at 1230$\^{C}$ for 5 hours. The intial permeability was measured and reflection loss was calculated from S-parameters for the composition of Ni$\_$x/Zn$\_$1-x/Fe$_2$O$_4$(x=0.36, 0.50, 0.66). NiZn-ferrite synthesized from waste iron oxide catalyst showed a feasibility for the use as electromagnetic wave absorber in X-band.

• Korean Journal of Environment and Ecology
• /
• v.9 no.1
• /
• pp.56-61
• /
• 1995

To examine the effects of gibberelin treatment on seed germination of six wild herbaceous species -Dicentra spectabilis, Aster pekinensis, Agastache rugosa, Elsoholtzia ciliata, Boehmeria tricuspis and Pulsatillia cerrma var. chaerophyiloides - in Kangwon-do, pretreated seeds of five species were sowed on plastic pots with mixed soil(sand：peat moss：perlite： vermiculite, 1：1：1：1, v/v) in 23,April 1995. Seeds were soaked in 25,50 ppm gibberelin solution and ground water during 24 hours. Pretreated seeds of Pulsatiilia cerrma var. chaerophylloides were sowed on nursery soil in 1, June 1995. Seed pretreatments in 31, May 1995 were same method. Seed germination rate was measured and compared among species and treatments. Seed germination rate of Dicentra spectabilis, Agastache rugosa and Elsoholtzia ciliata was differed higly significant among pretreatments ,but those of that of Aster pekinensis, Boehmeria tricuspis and Pulsatillia cerrma var chaerophylloides did not significant at 5% level. Gibberelin pretreatment raised seed germination rate of Dicentra spectabilis and Agastaohe rugosa and proper concentration of GA$_3$ was 25ppm and seed germination rate of Elsoholtzia ciliata was highest at GA$_3$ 50ppm plot. The utilization of wild herbaceous species were discussed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.957-967
• /
• 2017

Firing test of the fuel grain for solid fuel ramjet with additives and ignition support material was conducted. Fuel grain consist of HTPB mixed with AP particle 15 wt.%, Boron particle 5 wt.%. To cause the short ignition delay, ignition support consist of $NC/BKNO_3$ and composite propellant was coated to the fuel grain. An oxidant gas having a controlled temperature, pressure and oxygen composition close to the air condition in the ramjet combustor was supplied using the Ethanol blended $H_2O_2$ gas generator. Gas was set to flow at a mass flow rate of 150 g/s and mass flux of $200kg/m^2s$ in the grain port. Through the test, ignition support operated well and ignition delay of 0.5. During the test, stable chamber pressure with 8 bar and high combustion efficiency of 0.86 was confirmed.

• Polymer(Korea)
• /
• v.27 no.1
• /
• pp.69-74
• /
• 2003

In this study, we have investigated the adsorption properties for nitrate ion in ground water using mixed resin type hybrid ion exchange (HIXF) and fiber type ion exchanger. Their swelling ratio (4.45 g/g) and ion exchange capacities (2.45 meq/g) were higer than the swelling ratio of IEC and IXF. Adsorption yield increased for nitrate $NO_3^-$ and sulfate $SO_4^{2-}$ ions were optimal at the concentration ratios of nitrate and sulfate below 1.0 and the adsorption yields were 100% and 20%, respectively. On the other hand it was shown that the degree of adsorpted for nitrate to pH 3, but it was little changed in the other pH range. We found that the selective adsorption capacity for nitrate was the optimal the mixing ratios of resin and fibrous ion exchanger of below 0.5.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.2
• /
• pp.159-170
• /
• 2003

In this study, the mixed design of grout with hish strength.high permeation.high durability and environmental stability as the state of the art in material field was performed. Also, the subjects of grouting, grouting effects for ground conditions, and environmental effects were analyzed. According to these results, the fundamental data will be suggested as a design of grouting in the field application. The physical, mechanical and chemical characteristics with particle shape of the grouts were analyzed. Then, the gel-time of grouts, which is essential for workability and permeation range, were controlled. Also, the laboratory model grouting tests were performed to find the characteristics of solidification, permeation and durability with grouts. The ordinary portland, slag and microcement which have been used in the construction field were evaluated fur the environmental effects. To find the leaching of $Cr^{6+}$characteristics in cement grouts, $Cr^{6+}$ leaching tests were performed for the raw materials. Also, the results of leaching test were shorn by surrounding environment. Then, the unconfined compression strength tests were performed with the homo-gel samples, and the amount of changed $Cr^{6+}$ was measured by curing solution.

• Journal of the Korea Concrete Institute
• /
• v.20 no.2
• /
• pp.175-183
• /
• 2008

Domestically, application of High Flowing Self-Compacting Concrete (HSCC) is limited to building structures and it is difficult to find examples of application in civil infrastructural constructions. However, in the case of North America and Europe, by introducing precast and prestressed system, HSCC is being used for high-density reinforced bridge members. Hence it is assessed that broadening the utilization of HSCC into areas such as bridges and civil construction is required. Therefore in this research, to apply HSCC to high-density reinforced bridge members, ground granulated blast-furnace slag and fly ash were mixed in binary and ternary systems. Also the dynamical characteristics of HSCC, following 1st class regulations of Japan Society of Civil Engineers (JSCE), were assessed to enable application on high-density reinforced structures. The test results revealed ternary system mixture showed better mechanical characteristics than binary system mixture and the application on high-density reinforced precast bridge members seems possible.