• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.525-528
• /
• 2005

This study determines the best composite grade to minimize the void of aggregate mixture based on the maximum density theory in an attempt to suggest a mix proportion method design for asphalt mixtures. Study results show that the grading curve with the maximum mass per unit capacity of each aggregate mixture satisfied the KS standards and the optimum AP content to meet the optimal asphalt mixture void rate of 4$\%$ was 5.7$\%$, less than the optimum AP content of 6.5$\%$ suggested in the Marshal mix proportion method design. At the same time, the asphalt mixture produced based upon the suggested mix proportion method had a flow value 17$\%$ lower than that of asphalt mixture produced according to the Marshal method, while its density was greater by 0.06$\～$0.09. This suggests that the introduced mix proportion method design helps to improve the shape flexibility and crack-resistance of asphalt concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 봄 학술발표회 논문집
• /
• pp.29-32
• /
• 1991

This is the study on the performance of workability and engneering properties of flowing concrete using the superplasticizers, which are being used for control of the consistency of fresh concrete without modifying the properties of the hardened concrete and for production of high quality concrete at a low water-cement ratio. It is the aim of this study to analyze and investigate workability and engineering properties of flowing concrete according to the addition rate in poor and rich mix proportions of base concrete. Base on this fundamental investigation for the development of flowing concrete mix design, it could be drawn that the workability and engineering properties of flowing concreteare influenced greatly by mix proportion and dosage of superplasticizers.

• Journal of Ceramic Processing Research
• /
• 제19권6호
• /
• pp.509-513
• /
• 2018

This study uses fly ash for non-shrinkage grout in order to develop strength of grout and improve its durability. We grind fly ash to the extent of $7,000cm^2/g$ and use ground fly ash and raw fly ash respectively at the proportion of 10%, 20%, 30% instead of OPC and compare the results drawn on the condition of each proportion. As a mixed material of grout, EVA and water-reducing agent is added in order to prevent bleeding and improve segregation resistance, CSA is added with a view to preventing drying shrinkage and improving early strength property. In regard to flow and flow time test for analyzing and evaluating workability, it is revealed that grouts of all mix proportions except raw fly ash 30% mix proportion satisfy all performance criteria. With regard to length change rate, grout with no admixture shows the highest shrinkage rate, but the rate is 0.0005%, extremely insignificant rate. As material age increases, compressive strength of two grouts, that is to say ground fly ash 10% and 20%-used grouts, exceed that of grout with no admixture or show high-level compressive strength.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.131-132
• /
• 2011

This study analyzes the yearly-best delivered size range of truck mixer based on the specified mix, Water to Binder Ratio, aggregate proportion and unit amount with statistical method targeting on Kyeongi and Kyeongsang province and compares with the similar materials of Japan to propose as a basic standard for the quality control of mixer truck. As a result, in case of the Water to Binder Ratio of these areas, it is higher than Japan's due to the excessive safety rate reflecting the changes of differential value impact and unit amount, and the unit amount's standard deviation is very large by reflecting the changes of the amount used and chemical admixture susceptibility. In case of aggregate proportion, the frequency rate is about 50%, which is very similar value with Japan's one.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.262-268
• /
• 1998

This research is to examine the selected method of optimal mixing proportion and cost analysis in the super flowing concrete. As confined water $ratio($\beta_p$)$ and K is introduced, itis to establish optimal mixing design of super flowing concrete according to the steps of paste, mortar and concrete. From paste and mortar test, it was led to $$\beta_p$$ and $K_p$satisfying the optimum condions depending on the kinds of binders. Then $$\beta_p$$ and $K_p$ is reflected to the mix condition of super flowing concrete. The result of test, the mix condition of super flowing concrete satisfied the quality performance of concrete with adjustment of additional rate of the superplasticizer. Besides, in case of design strength $350kg/\textrm{cm}^2$ of concrete, material cost in super flowing concrete is able to be reduced 5~16% in replacement of fly ash 30% in ordinary portland cement and slag cement.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.275-280
• /
• 2001

Recently, self-compacting concrete is applied in order to achieve workability improvement and rationalization in construction. But self-compacting concrete using viscosity agent has a difficulty in practical use because viscosity agent is invested small quantity and by man-power. Therefore in this paper we have been focused on the development and practical use of self-compacting concrete by hydraulic composition containing the segregation-reducing agent. According to mix variable, we find out right quantity of water, binder and rate of admixture replacement, and also we find out the optimum mix proportion. In the result, self-compacting concrete by hydraulic composition containing the segregation reducing agent gave satisfaction with standard and its demand will increase in the future.

• 한국건설순환자원학회논문집
• /
• 제7권4호
• /
• pp.349-357
• /
• 2019

본 연구에서는 현장 굴착토를 활용한 유동화 채움재의 실용화 기술개발의 일환으로서 유동화 채움재의 배합요인별 유동성, 재료분리 저항성, 조기강도 및 재굴착강도 등의 공학적 특성을 검토하여 최적 배합비를 도출하였으며, 이를 토대로 이동식 B/P를 활용한 현장 적용성 평가를 수행하였다. 이동식 B/P를 활용한 현장평가 결과 요구성능을 확보할 수 있었다. 유동화 채움재의 타설 후 후속공정 개시기 확보를 위한 검토에서는 타설 5시간 후 노반재 투입 등 후속공정이 가능한 것으로 확인되었다. 유동화 채움재의 재굴착성 검토를 위해서는 타설 28일 코어 채취 및 강도측정, 기계 및 인력 재굴착 시연으로 재굴착성을 확보할 수 있는 것으로 나타났으며, 타설 단면 굴착 후 관 주변부 충진성 확보를 육안으로 확인할 수 있었다. 또한 품질 지속성을 평가하기 위해 타설 후 침하량을 측정하였으며, 우수한 체적 안정성을 확보할 수 있는 것으로 나타나 굴착토를 활용한 유동화 채움재의 실용화 가능성을 확인할 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.30-31
• /
• 2021

This study aims to build a deep learning model that can predict the value of concrete mixing properties according to a given concrete strength value. A model was created for a total of 1,291 concrete data, including 8 characteristics related to concrete mixing elements and environment, and the compressive strength of concrete. As the deep learning model, DNN-3L-256N, which showed the best performance on the prior study, was used. The average value for each characteristic of the data set was used as the initial input value. In results, in the case of 'curing temperature', which had a narrow range of values in the existing data set, showed the lowest error rate with less than 1% error based on MAE. The highest error rate with an error of 12 to 14% for fly and bfs.

• 콘크리트학회논문집
• /
• 제27권4호
• /
• pp.331-341
• /
• 2015

본 연구는 섬유보강 콘크리트의 실무 적용을 위한 성능 평가에 대해 재료 시험으로 낭비되던 시간과 노력을 최소화하고 적용에 있어서의 이론적인 배경을 확보하기 위해, 기존의 가이드라인 및 시험 기준에 따른 실험 결과의 수집과 통계적 분석을 통한, 콘크리트의 압축강도에 기반한 주요 특성들을 특정하기 위해 수행되었다. 섬유보강콘크리트는 다양한 변수에 영향을 받게 되므로 이론적인 접근이 어려운 측면이 있어 본 연구에서는 현재 실무에서 다방면으로 사용되고 있는 100MPa 이하의 압축강도를 가지는 콘크리트를 중심으로 0.25%에서 2% 사이의 강섬유 혼입량에 대한 압축강도와 인장강도 시험을 수행하였다. 인장강도 시험은 표준기관에서 정하고 있는 시험방법인 쪼갬인장강도와 휨인장강도에 대해 수행하였다. 섬유보강콘크리트의 재료시험 결과 쪼갬인장강도와 휨인장강도 모두 압축강도의 증가에 따라 증가하는 추세를 보였으며 강도의 증진률은 압축강도 증가와 함께 감소하는 추세를 보였다. 또한섬유의 혼입량 증가는 인장강도의 증가를 유발하는 것을 확인할 수 있었으며, 압축강도 증가에 따른 인장강도 증진률 감소를 막아 콘크리트 압축강도 증가에 선형적으로 인장강도가 증가하도록 해주는 것을 확인할 수 있었다. 기존 연구들로부터 구축한 데이터베이스를 통한 섬유보강콘크리트의 기계적 성질에 대한 검토를 수행하였다. 다양한 변수에 따른 인장강도의 추정을 위해 인공신경망을 적용하였다. 인공신경망은 multi layer perceptron으로 구성하였으며 전달함수로는 sigmoid 함수를 사용하였고 역전파 알고리즘을 통해 학습을 수행하였다. 인공신경망을 사용한 콘크리트 인장강도의 추정 결과 시험 결과와 추정결과가 유사하게 나타나는 것을 확인할 수 있었다. 인공신경망에서 결합력이 큰 변수들은 물-시멘트비와 섬유의 혼입량으로 나타났으며 섬유보강콘크리트의 인장강도는 물-시멘트비에 영향을 받는 압축강도와 혼입량을 통해 추정할 수 있을 것으로 판단된다.

• KIEAE Journal
• /
• 제15권1호
• /
• pp.155-160
• /
• 2015

The annual average of energy sources is continuously increasing at a rate of 5.8%, and particularly, the power generation proportion of new/renewable energy is increasing significantly. Furthermore, South Korea has established a national energy master plan for 2008-2030 and is aiming at obtaining approximately 11% of total energy production from the wind turbine sector. Although offshore wind turbines are similar to wind turbines installed on land, they require materials with excellent dynamic properties and durability to prevent damage due to seawater at the lower parts and connecting parts. The lower parts of wind turbines are submerged in seawater, and the upper and lower parts are connected by filling the connecting part with grout. This paper describes the test results of the process of determining the mix ratios to develop ultra-high grout for offshore wind turbines. There is virtually no relevant technology regarding grout for offshore wind turbines in South Korea that can be referenced for the process of determining the mix ratios. Therefore, tests were conducted for determining compression strength, elastic modulus, flexural strength, density, constructability (floor test), and early strength by referencing a high-performance grout produced in South Korea, and the mixing process for achieving the goal strengths was described using the Korean Industrial Standards (KS) as the reference.