• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1720-1725
• /
• 2015

The performance of the AlGaN/GaN MSM-2DEG varactor with different dielectric films deposited by the E-beam deposition is investigated in detail. The capacitance swing and the capacitance ratio of the varactor without dielectric film as well as with, SiO₂, Gd₂O₃, and Si₃N₄ films, respectively, are determined by electrodes of varying areas. The maximum capacitance, the minimum capacitance and the capacitance ratios are proportional to the increasing of the electrode areas. The capacitance ratio determined by the maximum and the minimum capacitance is found to be 18.35 (with Si₃N₄ dielectric film) and 149.51 (without dielectric film), respectively. The transition voltages of the fabricated varactors are almost the same for a bias voltage of about ±5 V and leakage current can be lower three orders of magnitude while the varactors with dielectric films. The tunability of the capacitance ratio makes the AlGaN/GaN MSM-2DEG varactor with a dielectric film highly useful in multirange applications of a surge free preamplier.

• Journal of Mechanical Science and Technology
• /
• 제18권10호
• /
• pp.1712-1721
• /
• 2004

A method of measuring the thermal diffusivity of semi-infinite solid material at room temperature using photothermal displacement is proposed. In previous works, within the constant thickness of material, the thermal diffusivity was determined by the magnitude and phase of deformation gradient as the relative position between the pump and probe beams. In this study, however, a complete theoretical treatment of the photothermal displacement technique has been performed for thermal diffusivity measurement in semi-infinite solid materials. The influence of parameters, such as, radius and modulation frequency of the pump beam and the thermal diffusivity, was studied. We propose a simple analysis method based on the zero -crossing position of real part of deformation gradient and the minimum position of phase as the relative position between two beams. It is independent of parameters such as power of pump beam, absorption coefficient, reflectivity, Poisson's ratio, and thermal expansion coefficient.

• 인터넷정보학회논문지
• /
• 제17권3호
• /
• pp.19-24
• /
• 2016

최소오차 엔트로피 알고리듬(MEE)은 충격성 잡음 환경에서 성능이 우수한 것으로 알려져 있다. 이 논문에서는 충격성 잡음에 대한 강인성의 견지에서 MEE 알고리듬의 최적해와 특성을 연구하였다. 큰 오차 값의 영향을 경감하는 요인들과 최적 가중치의 움직임에 대한 분석을 통하여 MEE의 최적해가 충격성 잡음으로부터 안정적으로 유지되도록 하는 주된 역할은 크기 조정된 입력 엔트로피가 담당하고 있음이 밝혀졌다. 시뮬레이션 결과에서, MEE의 최적해는 MSE 성능기준의 최적해와 같은 값을 가짐을 보였다.

• 한국재료학회지
• /
• 제19권4호
• /
• pp.203-206
• /
• 2009

$Sn_XSe_{100-X}$ (15|X|30) alloys have been studied to explore their suitability as phase change materials for nonvolatile memory applications. The phase change characteristics of thin films prepared by a Radio Frequency (RF) magnetron co-sputtering system were analyzed by an X-ray diffractometer and 4-point probe measurement. A phase change static tester was also used to determine their crystallization under the pulsed laser irradiation. X-ray diffraction measurements show that the transition in sheet resistance is accompanied by crystallization. The amorphous state showed sheet resistances five orders of magnitude higher than that of the crystalline state in $Sn_XSe_{100-X}$ (x = 15, 20, 25, 30) films. In the optimum composition, the minimum time of $Sn_XSe_{100-X}$ alloys for crystallization was 160, 140, 150, and 30ns at 15mW, respectively. The crystallization temperature and the minimum time for crystallization of thin films were increased by increasing the amount of Sn, which is correlated with the activation energy for crystallization.

• 한국기후변화학회지
• /
• 제7권4호
• /
• pp.421-426
• /
• 2016

Significant warming by anthropogenic influences over Korea is analyzed using CMIP5 projections (monthly mean, maximum and minimum temperatures) from RCP 8.5, 4.5, and 2.6 scenarios. Time of emergence (TOE) in JJA and DJF is chosen as the year when the magnitude of warming against the natural climate variability satisfies S/N>2 in 80% of the models in this study. Significant emergence in JJA is expected to appear in 2030s in three RCP scenarios, earlier than TOE in DJF. In DJF, TOE is expected to be 2040s in RCP 8.5 and is delayed in 2060s, 2080s in RCP 4.5, 2.6, respectively. Later emergence in low emission scenarios implies an importance of climate change mitigation consistent with previous studies. Maximum and minimum temperatures show similar results to the case of mean temperature. ToE is found to be affected by the amplitude of natural variability by season, variables and model spread, which requires further understanding.

• 한국음향학회지
• /
• 제26권6호
• /
• pp.276-285
• /
• 2007

본 논문에서는 현재까지 주파수 영역에서 개발된 4종류의 라우드스피커 TS 매개변수 규명법들에 대하여 비교 검토하였다. 보이스 코일 인덕터에 대한 상세한 모델링을 위해 주파수 종속 모델링 기법을 소개하였고 관련된 매개변수들을 유도하였다. 라우드스피커의 동적 질량을 알고 있을 때에 TS 매개변수를 규명하는 방법을 소개하고 이를 실제 라우드스피커에 적용할 때에 고려할 사항들도 기술하였다. 1채널 장비로 전기 임피던스를 측정할 때에는 크기만을 측정하게 되므로 위상값 추정을 위해 최소 위상 변환법을 사용하는 방법도 기술하였다.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.1886-1896
• /
• 1991

본 연구에서는 부상높이를 예측할 수 있는 방법을 개발하고 연관된 변수들의 변동에 따른 부상높이를 검토함으로써 불안정한 극소 공기막 형성시 유발되는 자기헤 드와 하드 디스크간 정보손실 및 하드 디스크의 표면손상을 막고 고성능 자기기억장치 설계에 도움이 되고자 한다.

• 한국지반환경공학회 논문집
• /
• 제10권2호
• /
• pp.61-68
• /
• 2009

본 논문은 수리학적 현장 주입시험 기간 동안 고려될 필요가 있는 수리역학적 상호작용에 따른 균열암반매질의 수리학적 거동에 대한 수치적 연구이다. 이러한 주입시험은 굴착정 내에 설치된 개구간(open hole section)을 따라 높은 압력을 가진 유량을 주입하며, 이를 통해 굴착정을 가로지르는 균열로부터 유량을 측정하는 것이다. 시간에 따라 변화되는 유량측정결과는 수리역학적 상호작용에 대한 분석 및 예측을 위해 개발된 수치모형의 현장 적용성을 평가하기 위해 사용되었다. 유량측정결과 전도성이 있는 균열들은 상호의존적인 균열망을 형성하며, 이로 인해 균열망을 구성하는 개별적인 균열요소들은 독립적인 시스템으로서 적절하게 모형화 될 수 없음을 보여주었다. 또한 간극수압이 굴착정 주위에 작용하는 최소주응력을 초과할 때 새로운 유체유입영역이 발생되며, 이러한 최소주응력보다 훨씬 큰 간극수압은 굴착정 주위의 균열들에 의해 유지될 수 있다는 것을 보여주었다. 본 연구에서 이러한 특성들이 자연 상태의 균열망의 구성형태에 따라 어떻게 영향을 미치게 되는지 이산 균열망 모형을 통해 수치적으로 분석되었다.

• Structural Engineering and Mechanics
• /
• 제61권4호
• /
• pp.527-538
• /
• 2017

The evaluation of the loss-of-support conditions of frictional beam-to-column connections using simplified numerical models describing the transverse response of a portal-like structure is presented in this paper considering the effects of the seismic-hazard disaggregation. Real earthquake time histories selected from European Strong-motion Database (ESD) are used to show the effects of the seismic-hazard disaggregation on the beam loss-of-support conditions. Seismic events are classified according to different values of magnitudes, epicentral distances and soil conditions (stiff or soft soil) highlighting the importance of considering the characteristics of the seismic input in the assessment of the loss-of-support conditions of frictional beam-to-column connections. A rigid and an elastic model of a frame of a precast industrial building (2-DoF portal-like model) are presented and adopted to find the minimum required friction coefficient to avoid sliding. Then, the mean value of the minimum required friction coefficient with an epicentral distance bin of 10 km is calculated and fitted with a linear function depending on the logarithm of the epicentral distance. A complete parametric analysis varying the horizontal and vertical period of vibration of the structure is performed. Results show that the loss-of-support condition is strongly influenced by magnitude, epicentral distance and soil conditions determining the frequency content of the earthquake time histories and the correlation between the maxima of the horizontal and vertical components. Moreover, as expected, dynamic characteristics of the structure have also a strong influence. Finally, the effect of the column nonlinear behavior (i.e. formation of plastic hinges at the base) is analyzed showing that the connection and the column are a series system where the maximum force is limited by the element having the minimum strength. Two different longitudinal reinforcement ratios are analyzed demonstrating that the column strength variation changes the system response.

• Bulletin of the Korean Chemical Society
• /
• 제35권4호
• /
• pp.1149-1153
• /
• 2014

Real-time monitoring of hourly atmospheric radon (Rn-222) concentration was performed throughout 2011 at Gosan station, Jeju Island, one of the least polluted regions in Korea, in order to characterize the background levels, and temporal variations on diurnal to seasonal time-scales. The annual mean radon concentration for 2011 was $2527{\pm}1356$ mBq $m^{-3}$, and the seasonal cycle was characterized by a broad winter maximum, and narrow summer minimum. Mean monthly radon concentrations, in descending order of magnitude, were Oct > Sep > Feb > Nov > Jan > Dec > Mar > Aug > Apr > Jun > May > Jul. The maximum monthly mean value (3595 mBq $m^{-3}$, October), exceeded the minimum value (1243 mBq $m^{-3}$, July), by almost a factor of three. Diurnal composite hourly concentrations increased throughout the night to reach their maximum (2956 mBq $m^{-3}$) at around 7 a.m., after which they decreased to their minimum value (2259 mBq $m^{-3}$) at around 3 p.m. Back trajectory analyses indicated that the highest radon events typically exhibited long-term continental fetch over Asia before arriving at Jeju. In contrast, low radon events were generally correlated with air mass fetch over the North Pacific Ocean. Radon concentrations typical of predominantly continental, and predominantly oceanic fetch, differed by a factor of 3.8.