• Geomechanics and Engineering
• /
• v.37 no.6
• /
• pp.599-614
• /
• 2024

To evaluate the safety status of deteriorated segments in a submarine shield tunnel during its service life, a seepage model was established based on a cross-sea shield tunnel project. This model was used to study the migration patterns of erosive ions within the shield segments. Based on these laws, the degree of deterioration of the segments was determined. Using the derived analytical solution, the internal forces within the segments were calculated. Lastly, by applying the formula for calculating safety factors, the variation trends in the safety factors of segments with different degrees of deterioration were obtained. The findings demonstrate that corrosive seawater presents the evolution characteristics of continuous seepage from the outside to the inside of the tunnel. The nearby seepage field shows locally concentrated characteristics when there is leakage at the joint, which causes the seepage field's depth and scope to significantly increase. The chlorine ion content decreases gradually with the increase of the distance from the outer surface of the tunnel. The penetration of erosion ions in the segment is facilitated by the presence of water pressure. The ion content of the entire ring segment lining structure is related in the following order: vault < haunch < springing. The difference in the segment's rate of increase in chlorine ion content decreases as service time increases. Based on the analytical solution calculation, the segment's safety factor drops more when the joint leaks than when its intact, and the change rate between the two states exhibits a general downward trend. The safety factor shows a similar change rule at different water depths and continuously decreases at the same segment position as the water depth increases. The three phases of "sudden drop-rise-stability" are represented by a "spoon-shaped" change rule on the safety factor's change curve. The issue of the poor applicability of indicators in earlier studies is resolved by the analytical solution, which only requires determining the loss degree of the segment lining's effective bearing thickness to calculate the safety factor of any cross-section of the shield tunnel. The analytical solution's computation results, however, have some safety margins and are cautious. The process of establishing the evaluation model indicates that the secondary lining made of molded concrete can also have its safety status assessed using the analytical solution. It is very important for the safe operation of the tunnel and the safety of people's property and has a wide range of applications.

• Clean Technology
• /
• v.25 no.4
• /
• pp.289-295
• /
• 2019

Though the usage of vinyls and plastics produced from fossil fuels has been increasing in the world, the eco-friendly domestic disposal or recycling of waste vinyls has to be executed because the migration or importation of waste vinyls or waste plastics are globally prohibited. Even though the eco-friendly domestic disposal or recycling of waste vinyls and waste plastics should be developed, promising eco-friendly recycling methods are few because there are extraneous substances in waste vinyls and waste plastics. Also, conventional incineration and landfill methods result in secondary contamination and then increase disposal costs. Therefore, the selective elimination of extraneous substances or other materials included in waste vinyls and waste plastics could make valuable recycling or reuse possible. In particular, the novel hybrid process in which crushing and screening are simultaneously conducted in a rotary kiln type reactor can domestically maximize the material recycling or reuse. In this study, the feasibility study for a crushing/screening hybrid process developed in Korea was performed and evaluated in case of thermal recycling (TR) and material recycling (MR). The effect of various subsidies on economic efficiency was especially evaluated by means of domestic recycling plans. The incentive revenues from waste vinyl recycling and the incineration share of waste vinyls affected the net present values and internal rate of returns of the hybrid process.

• Nuclear Engineering and Technology
• /
• v.25 no.4
• /
• pp.529-538
• /
• 1993

A stochastic way using continuous time Markov process is presented to model the one-dimensional nuclide transport in fractured rock matrix as an extended study for previous work ［1］. A nuclide migration model by the continuous time Markov process for single planar fractured rock matrix, which is considered as a transient system where a process by which the nuclide is diffused into the rock matrix from the fracture may be no more time homogeneous, is compared with a conventional deterministic analytical solution. The primary desired quantities from a stochastic model are the expected values and variance of the state variables as a function of time. The time-dependent probability distributions of nuclides are presented for each discretized compartment of the medium given intensities of transition. Since this model is discrete in medium space, parameters which affect nuclide transport could be easily incorporated for such heterogeneous media as the fractured rock matrix and the layered porous media. Even though the model developed in this study was shown to be sensitive to the number of discretized compartment showing numerical dispersion as the number of compartments are decreased, with small compensating of dispersion coefficient, the model agrees well to analytical solution.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.6
• /
• pp.98-109
• /
• 2011

Habitat restoration initiative is an important factor for the on-site preservation of butterflies. A new habitat necessitates the investigation of the ecology of the butterfly, the landscape of the habitat, the work process, and a cost analysis. In this study, these factors were analyzed through1) re-consideration of the secured results from three years of field work, and 2) a habitat area estimation conducted according to the presence or absence of larvae and adults via a Parnassius bremeri Bremer survey. The investigation of the natural habitat, done for both larvae and adult butterflies found in South Korea, suggested that multiple patches with a minimum size exceeding $300m^2$ and with an average size of about $1,600m^2$were required for survival of this butterfly. Therefore, more than five patches should be considered for butterfly habitat and patches should have similarity to the present habitat environment with transplantation plans for diet plants and honeydew plants. In addition, to activate the migration of the butterfly, cutting down trees that are obstacles to migration, minimizing the distance between patches and the addition of a stepping patch are also required. A patch connectivity analysis showed that patches should be located within 300m of neighboring patches, as the migration of the butterfly will fail if it is more than 600m. Additionally, more than $10,000m^2$ for a single patch or a patch network composed more than five patches over $1,600m^2$ in size were recommended, with a total patch size of $8,000m^2$. Additionally, neighboring multiple patch networks are more desirable than a single habitat in the event a cyclic habitat pattern arises. In this study, we suggest a habitat restoration and optimal prerequisites for a butterfly habitat. It is expected that this research will lead to the creation of a good model for the restoration of butterfly species.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.8
• /
• pp.507-516
• /
• 2013

Mobile devices have limited computing power and resources. Since mobile devices are equipped with rich network connectivity, an approach to subscribe cloud services can effectively remedy the problem, which is called Mobile Cloud Computing (MCC). Most works on MCC depend on a method to offload functional components at runtime. However, these works only consider the limited verion of offloading to a pre-defined, designated node. Moveover, there is the limitation of managing services subscribed by applications. To provide a comprehensive and practical solution for MCC, in this paper, we propose a self-stabilizing process and its management-related methods. The proposed process is based on an autonomic computing paradigm and works with diverse quality remedy actions such as migration or replicating services. And, we devise a pratical offloading mechanism which is still in an initial stage of the study. The proposed offloading mechanism is based on our proposed MCC meta-model. By adopting the self-stabilization process for MCC, many of the technical issues are effectively resolved, and mobile cloud environments can maintain consistent levels of quality in autonomous manner.

• Journal of the Korean Magnetics Society
• /
• v.7 no.1
• /
• pp.25-30
• /
• 1997

Physical and magnetic behaviors of reduced Co-Zn-Ti-Sn substituted Ba-ferrite particles with hydrogen are different from those of reduced-pure Ba-ferrite particles. The coercivity of substituted Ba-feffite particles shows a peaking effect with the reduction temperature ranging from 250 to 520 $^{\circ}C$, while the coercivity of pure Ba-ferrite decreases monotonically. The reduction process of substituted Ba-ferrite has been found to be devided into three steps. At the first and second steps, the magneto-plumbite structure maintained. When the reduced-substituted Ba-ferrite particles are reoxidized, the coercivity is reversible at the first step but irreversible at the second step. During the third step of reduction process above 410 $^{\circ}C$. The magneto plumbite structure was collapsed with formation of $\alpha$-Fe and $BaFeO_{3-x}$ phases and consequently the coercivity distribution is broaden and the coercivity irreversible. The coercivity and saturation magnetization decreases and increases up to 130 emu/g respectively. In this study, it is found that the substituted elements prevent the magneto-plumbite structure from collapse during the reduction process and furthermore migrate from the magnetic sites of $2a+4f_{IV}$, 2b, and 12k to $4f_{VI}$ and 12k'. An increase in the coercivity before the collapse of magneto-plumbite structure is attributed to the migration of cations in hexagonal Ba-ferrite structure.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.17 no.4
• /
• pp.292-302
• /
• 2012

This paper reviews comparison analysis of current and latest application for stock identification methods of Todarodes pacificus, and the pros and cons of each method and consideration of how to compensate for each other. Todarodes pacificus which migrates wide areas in western North Pacific is important fishery resource ecologically and commercially. Todarodes pacificus is also considered as 'biological indicator' of ocean environmental changes. And changes in its short and long term catch and distribution area occur along with environmental changes. For example, while the catch of pollack, a cold water fish, has dramatically decreased until today after the climate regime shift in 1987/1988, the catch of Todarodes pacificus has been dramatically increased. Regarding the decrease in pollack catch, overfishing and climate changes were considered as the main causes, but there has been no definite reason until today. One of the reasons why there is no definite answer is related with no proper analysis about ecological and environmental aspects based on stock identification. Subpopulation is a group sharing the same gene pool through sexual reproduction process within limited boundaries having similar ecological characteristics. Each individual with same stock might be affected by different environment in temporal and spatial during the process of spawning, recruitment and then reproduction. Thereby, accurate stock analysis about the species can play an efficient alternative to comply with effective resource management and rapid changes. Four main stock analysis were applied to Todarodes pacificus: Morphologic Method, Ecological Method, Tagging Method, Genetic Method. Ecological method is studies for analysis of differences in spawning grounds by analysing the individual ecological change, distribution, migration status, parasitic state of parasite, kinds of parasite and parasite infection rate etc. Currently the method has been studying lively can identify the group in the similar environment. However It is difficult to know to identify the same genetic group in each other. Tagging Method is direct method. It can analyse cohort's migration, distribution and location of spawning, but it is very difficult to recapture tagged squids and hard to tag juveniles. Genetic method, which is for useful fishery resource stock analysis has provided the basic information regarding resource management study. Genetic method for stock analysis is determined according to markers' sensitivity and need to select high multiform of genetic markers. For stock identification, isozyme multiform has been used for genetic markers. Recently there is increase in use of makers with high range variability among DNA sequencing like mitochondria, microsatellite. Even the current morphologic method, tagging method and ecological method played important rolls through finding Todarodes pacificus' life cycle, migration route and changes in spawning grounds, it is still difficult to analyze the stock of Todarodes pacificus as those are distributed in difference seas. Lately, by taking advantages of each stock analysis method, more complicated method is being applied. If based on such analysis and genetic method for improvement are played, there will be much advance in management system for the resource fluctuation of Todarodes pacificus.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.11
• /
• pp.2493-2499
• /
• 2011

With growth of nano-bio industry, it is of significant importance to develop an automated system to exploit cell behaviors, including migration, mitosis, apoptosis, shape deformation of individual cells and their interactions among cells in the process of cell growth. In this paper, we proposed preprocessing techniques, a classification method which classifies clusters (overlapping multiple cells) from cells and an automated method which counts the number of cells and clusters in order to analyze 2D or 3D deformations of the cells in the real-time images from microscope in the cell culture. We conducted the 3T3 cell images taken from each thirty-minute interval. It showed the average 99.8% accuracy automatically for separating cells and clusters.

• Applied Microscopy
• /
• v.47 no.3
• /
• pp.203-207
• /
• 2017

A homogeneous $KNbO_3$ (KN) phase was formed by sintering at $1,040^{\circ}C$ for 1 hour, without formation of the $K_2O$-deficient secondary phase even though suffering the minor loss of $K_2O$. KN liquid phase was formed during sintering and abnormal grain growth occurred in this specimen. The detailed microstructural observations on KN during sintering were carried out using high resolution transmission electron microscopy. The ledged structures were found at the KN grain boundary and the abnormal grain growth was performed by the lateral migration of these ledges in the presence of the liquid phase. The liquid pockets were found in the KN grains. They have various external shapes mainly due to the kinetic factors. They have atomically flat interfaces with some ledges with one atomic height. The slight deficient $K_2O$ by evaporation might somewhat reduce the melting point of KN from the reported at $1,058^{\circ}C$. The liquid pockets play an important role in supplying the liquid phase during the abnormal grain growth in the sintering process of KN ceramics.

• Membrane and Water Treatment
• /
• v.11 no.3
• /
• pp.207-215
• /
• 2020

Vivianite (Fe₃²⁺(PO₄)2·8H₂O) and green rust ([Fe₄²⁺Fe₂³⁺(OH)^-₁₂][SO₄^2-·2H₂O]^2-), ferrous containing minerals, could remove aqueous U(VI) in 5 min. and the efficiencies of green rust were roughly 2 times higher than that of vivianite. The zeta potential measurement results implies that the better performance of green rust might be attributed to the favorable surface charge toward uranyl phosphate species. The removal behaviors of the minerals were well fitted by pseudo-second order kinetic model (R² > 0.990) indicating the dominant removal process was chemical adsorption. Effects of Ca²⁺ and CO₃^2- at pH 7 were examined in terms of removal kinetic and capacity. The kinetic constants of aqueous U(VI) were 8 and 13 times lower (0.492 × 10^-3 g/(mg·min); 0.305 × 10^-3 g/(mg·min)) compared to the value in the absence of the ions. The thermodynamic equilibrium calculation showed that the stable uranyl species (uranyl tri-carbonate) were newly formed at the condition. Surface investigation on the reacted mineral with uranyl phosphates species were carried out by XPS. Ferrous iron and U(VI) on the green rust surface were completely oxidized and reduced into Fe(III) and U(IV) after 7 d. It suggests that the ferrous minerals can retard U(VI) migration in phosphate-rich groundwater through the adsorption and subsequent reduction processes.