• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.217-220
• /
• 2009

Conductive adhesives have been investigated for use in microelectronics packaging as a lead-free solder substitute due to their advantages, such as low bonding temperature. However, high resistivity and poor mechanical behavior may be the limiting factors for the development of conductive adhesives. The metal fillers and the polymer resins provide electrical and mechanical interconnections between surface mount device components and a substrate. As metal fillers used in conductive adhesives, silver is the most commonly used due to its high conductivity and the stability. However the cost of conductive adhesives with silver fillers is much higher than usual lead-free solders and silver has poor electro-migration performance. So, copper can be a promising candidate for conductive filler metal due to its low resistivity and low cost, but oxidation causes this metal to lose its conductivity. In this study, electrically conductive adhesives (ECAs) using surface modified copper fillers were developed. Especially, in order to overcome the problem associated with the oxidation of copper, copper particles were coated with silver, and the silver-coated copper was tested as a filler metal. Especially the effect of silver coating on the electrical resistance just after curing and after aging was investigated. As a result, it was found that the electrical resistance of ECA with silver-coated copper filler was clearly lower and more stable than that of ECA with pure copper filler after curing process. And, during high temperature storage test, the degradation rate of electrical resistance for ECA with silver coated copper filler was quite slower than that for ECA with pure copper filler.

• Nutrition Research and Practice
• /
• v.15 no.6
• /
• pp.747-760
• /
• 2021

BACKGROUND/OBJECTIVES: The consumption of home meal replacement (HMR) is increasing among college students in Korea and China. In particular, Chinese college students studying abroad in Korea (CSK) show changes in their dietary behavior after migration, and HMR consumption for meal substitution is also increasing. This study was conducted to compare the HMR consumption behaviors and HMR development needs of CSK, Chinese college students in China (CSC), and Korean college students in Korea (KSK). SUBJECTS/METHODS: The subjects were 570 college students (180 CSK, 200 CSC, and 190 KSK) who had experience of HMR consumption. Data were collected by face-to-face survey in 2019 and analyzed using SPSS 25.0. RESULTS: The majority of the subjects purchased HMR to 'saving time' and 'preventing meal skipping'. Average purchase price per HMR was about 5,000 won for the CSK and KSK, and about 3,000 won for the CSC. The most important attributes when selecting HMR for the CSK and CSC were hygiene, freshness, and taste in that order, while for the KSK were taste, price, and hygiene. Rice was preferred by the KSK while grilled and fried dishes were preferred by the CSK and CSC. In terms of development needs, dessert and meat-based side dishes were highest in all three groups. The preferred food materials for more than 50% of the subjects of all groups were beef, chicken, pork, shrimp, and squid, and spinach and Chinese cabbage in the CSK, and onion in the KSK. CONCLUSIONS: This study shows more effort is needed to develop the healthy customized HMR for college students studying in Korea and China, and that focuses are placed by CSK on hygiene and freshness, by CSC on meat side dishes, hygiene, and price, and by KSK on snacks (as meal substitutes), taste, and price.

• Journal of Environmental Science International
• /
• v.31 no.10
• /
• pp.861-868
• /
• 2022

The Namdae stream in Gangneung-si is one of the rivers where salmon stock is mainly maintained by natural spawning rather than artificial seedlings. There are structures including weir, and fish distribution and movement characteristics can be different by these structures. In this study, we investigated the distribution and behavioral characteristics of salmon by sighting survey within 12 km immediately upstream of the river mouth between October 2021 and February 2022. As a result, salmon distributed within 9 km from rivermouth. There were more salmon in the lower reaches of Doosan weir than in the upper reaches of that. The main spawning ground for salmon was between 7-9 km from rivermouth and around the lower part of Doosan weir. Salmon behaved for spawning in the gravel-bed area and undercut slope of the mainstream, such as mating, digging the riverbed, and competition among males. Salmon moved more slowly in the gravel-bed area than sand-bed area. Doosan weir hinders the spawning migration of salmon by frequent flow changes and terraced fishway. This study provides primary information to understand the ecological changes of salmon by environmental changes in the Namdae stream.

• Geomechanics and Engineering
• /
• v.27 no.6
• /
• pp.583-594
• /
• 2021

The gas permeability behavior of unsaturated bentonite-based materials is of major importance for ensuring effective sealing of high-level radwaste repositories. This study investigated this by taking a sample of Granular Bentonite Material (GBM) at the end of the Engineered Barrier Emplacement (EB) experiment in the Opalinus Clay, placing it under different humidity conditions until it achieved equilibration, and testing the change in the gas permeability under loading and unloading. Environmental humidity is shown to have a significant effect on the water content, saturation, porosity and dry density of GBM and to affect its gas permeability. Higher sensitivity to confining pressure is exhibited by samples equilibrated at higher relative humidity (RH). It should be noted that for the sample at RH=98%, when the confining pressure is raised from 1 MPa to 6 MPa, gas permeability can be reduced from 10^-16 m² to 10^-19 m², which is close to the requirements of gas tightness. Due to higher water content and easier compressibility, samples equilibrated under higher RH show greater irreversibility during the loading and unloading process. The effective gas permeability of highly saturated samples can be increased by 2-3 orders of magnitude after 105℃ drying. In addition, cracks possibly occurred during the dehydration and drying process will become the main channel for gas migration, which will greatly affect the sealing performance of GBM.

• Journal of Preventive Medicine and Public Health
• /
• v.57 no.4
• /
• pp.356-369
• /
• 2024

Objectives: The objective of this study was to explore healthcare providers' experiences in managing the coronavirus disease 2019 (COVID-19) pandemic and its impact on healthcare services. Methods: A qualitative study was conducted with 34 healthcare professionals across 15 districts in Bangladesh. Among the participants, 24 were health managers or administrators stationed at the district or upazila (sub-district) level, and 10 were clinicians providing care to patients with COVID-19. The telephone interviews were conducted in Bangla, audio-recorded, transcribed, and then translated into English. Data were analyzed thematically. Results: Most interviewees identified a range of issues within the health system. These included unpreparedness, challenges in segregating COVID-19 patients, maintaining isolation and home quarantine, a scarcity of intensive care unit beds, and ensuring continuity of service for non-COVID-19 patients. The limited availability of personal protective equipment, a shortage of human resources, and logistical challenges, such as obtaining COVID-19 tests, were frequently cited as barriers to managing the pandemic. Additionally, changes in the behavior of health service seekers, particularly increased aggression, were reported. The primary motivating factor for healthcare providers was the willingness to continue providing health services, rather than financial incentives. Conclusions: The COVID-19 pandemic presented a unique set of challenges for health systems, while also providing valuable lessons in managing a public health crisis. To effectively address future health crises, it is crucial to resolve a myriad of issues within the health system, including the inequitable distribution of human resources and logistical challenges.

• 한국해양학회지
• /
• v.22 no.1
• /
• pp.43-56
• /
• 1987

A study on sedimentation, geochemical behavior and seismic stratigrapht of the continental shelf sediments along the Korea Strait and a part of south and southeast offshore area of the Korea Peninsula was carried out. In the inner shelf floor with depth ranging up to 80m zonal distribution patterns of mud, sandy silt, and silty sand were observed. In the outer shelf, however, coarse sandy sediments are dominant, and shills and gravels were frequently observed. These observations seem to confirm the Holocene sedimentary processes on the continental shelves off the south, south to east coasts of Korea discussed by Park (1985 and 1986) and Park and Choi (1986). The suface sediments (upper most 5cm thick)from selected 9 stations were analyzed for Al,Mn, Fe,Cr,Ni,Cu,Zn and Pb in order to study geochemical behavior of the sediments in the study area. All data were normalized to Al to com,pensate the size effect of the sediments.In general,inner shelf sediments show slight enrichment compared to the outer shelf sediments.In particular,Pb and Zn show heavy enrichment in most of the sediments.to degrees comparable to those observed at the polluted Kwangyang and Masan Bay sediments.Thus,it is considered that rapid migration or movement of fine-grained sediments in the study area does exist. Three seismic stratigraphic units were analyzed based on the seismic records.The acoustic basement the lower sedimentary deposit(B)and the upper deposit(A)were observed.The strong reflectivity R,in particular, between unit A and B is considered to be an erosinal unconformity during the last Glacial time.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.2021-2030
• /
• 2017

In this paper, the unipolar corona-needle charger was developed and its capabilities were both numerically and experimentally investigated. The experimental corona discharges and particle losses in the charger were obtained at different corona voltage, aerosol flow rate and particle diameter for positive and negative coronas. Inside the charger, the electric field and charge distribution and the transport behavior of the charged particle were predicted by a numerical simulation. The experimental results yielded the highest ion number concentrations of about $1.087{\times}10^{15}ions/m^3$ for a positive corona voltage of about 3.2 kV, and $1.247{\times}10^{16}ions/m^3$ for a negative corona voltage of about 2.9 kV, and the highest $N_it$ product for positive and negative coronas was found to about $7.53{\times}10^{13}$ and $8.65{\times}10^{14}ions/m^3$ s was occurred at the positive and negative corona voltages of about 3.2 and 2.9 kV, respectively, and the flow rate of 0.3 L/min. The highest diffusion loss was found to occur at particles with diameter of 30 nm to be about 62.50 and 19.33 % for the aerosol flow rate of 0.3 and 1.5 L/min, respectively, and the highest electrostatic loss was found to occur at particles with diameters of 75 and 50 nm to be about 86.29 and 72.92 % for positive and negative corona voltages of about 2.9 and 2.5 kV, respectively. The numerical results for the electric field distribution and the charged particles migration inside the charger were used to guide the description of the electric field and the behavior of charged particle trajectories to improve the design and refinement of a unipolar corona-needle charger that otherwise could not be seen from the experimental data.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.5
• /
• pp.112-120
• /
• 2012

A numerical model considering the internal vaporization and the creep effect, in the form of a analytical program, for tracing the behavior of high strength concrete(HSC) members exposed to fire is presented. The two stages, i.e., spalling procedure and fire resistance time, associated with the thermal, moisture flow, creep and structural analysis, for the prediction of fire resistance behavior are explained. The use of the analytical program for tracing the response of HSC member from the initial pre-loading stage to collapse, due to fire, is demonstrated. Moisture evaporates, when concrete is exposed to fire, not only at concrete surface but also at inside the concrete to adjust the equilibrium and transfer properties of moisture. Finite element method is employed to facilitate the moisture diffusion analysis for any position of member, so that the prediction method of the moisture distribution inside the concrete members at fire is developed. The validity of the numerical model used in this program is established by comparing the predictions from this program with results from others fire resistance tests. The analytical program can be used to predict the fire resistance of HSC members for any value of the significant parameters, such as load, sectional dimensions, member length, and concrete strength.

• Journal of the Korean Chemical Society
• /
• v.44 no.5
• /
• pp.453-459
• /
• 2000

FED has deserved an intensive attentioD as a new flat panel display. The present investigationaims at undemtanding the photoluminescence and cathodoluminescent properties of hGaO$_3$: $Eu^{3+}$ phosphor bytaking into account the possibility that this phosphor could be applied for FED. In onler to investigate on.sucha detailed behavior; 8everM experimental skil18 Je conducted to the LaGaO$_3$:$Eu^{3+}$ phosphoL The excimtion srectrum artd emission spectmn were rnezsured in the UV range and then decay curve of $^5D_0$+$^7F_j$transitions\vas examined. The decay behavior of $^5D_0$ emission was anMyzed by a newly Iuoposed cross-relaxation mech-ani8In in asswiation with inteFwnter di1ffision (or migration). The cross-mlaxation from $^5D_0$ to CTB (Cha'geTransfer Band) wuld be a quite retsonable by considering the excitation spectrum. It could be also found thatthe quenching type was changed from ditfrsion controlled process to the direct quenching process -s inJeasing $Eu^{3+}$ oncntration.

• Tunnel and Underground Space
• /
• v.30 no.4
• /
• pp.382-393
• /
• 2020

The engineered barrier system of high-level radioactive waste disposal must maintain its performance in the long term, because it must play a role in slowing the rate of leakage to the surrounding rock mass even if a radionuclide leak occurs from the canister. In particular, it is very important to clarify gas dilation flow phenomenon clearly, that occurs only in a medium containing a large amount of clay material such as a bentonite buffer, which can affect the long-term performance of the bentonite buffer. Accordingly, DECOVALEX-2019 Task A was conducted to identify the hydraulic-mechanical mechanism for the dilation flow, and to develop and verify a new numerical analysis technique for quantitative evaluation of gas migration phenomena. In this study, based on the conventional two-phase flow and mechanical behavior with effective stresses in the porous medium, the hydraulic-mechanical model was developed considering the concept of damage to simulate the formation of micro-cracks and expansion of the medium and the corresponding change in the hydraulic properties. Model verification and validation were conducted through comparison with the results of 1D and 3D gas injection tests. As a result of the numerical analysis, it was possible to model the sudden increase in pore water pressure, stress, gas inflow and outflow rate due to the dilation flow induced by gas pressure, however, the influence of the hydraulic-mechanical interaction was underestimated. Nevertheless, this study can provide a preliminary model for the dilation flow and a basis for developing an advanced model. It is believed that it can be used not only for analyzing data from laboratory and field tests, but also for long-term performance evaluation of the high-level radioactive waste disposal system.