• 한국전산구조공학회논문집
• /
• 제19권4호
• /
• pp.337-345
• /
• 2006

본 연구에서는 개발된 중공단면 복합소재 교량 바닥판에 대해 피로거동을 평가하기 위하여 거더 지지부에서의 압축피로 시험과 2.8m 길이의 휨시험체 모델에 대한 휨피로시험을 수행하였다. 피로하중은 도로교설계기준의 제시된 DB24 트럭 후륜 축하중에 대해 200만회까지 반복 재하하였으며, 압축피로시험의 경우에는 복합소재 바닥판 부재와 바닥판 튜브간의 연결부에 대한 피로성능을, 휨피로시험의 경우에는 복합소재 바닥판 및 주형연결부에 대한 피로성능을 분석하였다.

• 한방재활의학과학회지
• /
• 제25권2호
• /
• pp.111-118
• /
• 2015

Objectives Through the clinical records of Seungjeongwon Ilgi, we reviewed the usage of Bi-Jeung to know the concept of the word and studied therapeutic strategies for managing Bi-Jeung. Methods We investigated the clinical records of the mid-Chosun dynasty containing the key word "Bi" from electronic database (Seungjeongwon Ilgi). Results Of 4,039 records, 249 articles thought to have medicinal value were lastly selected. We subdivided the cases into 13 categories according to time, the connection of contents and the change of associated symptoms. "Bi" was not used alone but used in combination with body parts or other symptoms. Etiological causes of "Bi" involved dampness, phlegm, fire, heat and qi disorders. We suggested that "Bi" of the mid-Chosun dynasty meant a symptom group mainly of sensory impairment and additionally pain or motor disturbance. Among the 22 herbal medicine formulas used, 15 were based on internal medical pattern identifications and 7 were symptomatic treatments. Acupuncture and moxibustion therapy were primarily applied to adjacent acupoints. In addition, External therapies were used together, such as washing therapy, plaster therapy, cupping therapy and thermotherapy. Conclusions "Bi" principally indicated sensory impairment on limbs and the main etiological cause was considered to be dampness. Herbal medicine, acupuncture, moxibustion and external therapies were used to cure Bi-Jeung.

• 한국항공우주학회지
• /
• 제44권8호
• /
• pp.666-667
• /
• 2016

우주개발중장기 계획의 세부 실천 방안으로써, 우주기술 로드맵을 기획하고 있는 상황에서, 관련 분야 연구자들의 역량을 모아 국가 우주개발 계획과의 연계성을 높이기 위하여 우리나라 우주개발에서 예상되는 각 시스템 별 핵심기술들을 파악하여 항공우주학회지의 특별 섹션으로 소개하는 기회를 마련하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2018년도 학술발표회
• /
• pp.170-170
• /
• 2018

In some case studies, the heavy precipitation events and rapid cyclogenesis in the extratropics can be caused by moist and warm tropical air masses. Tropical Moisture Exports (TME) correspond to the meridional transport of moist air masses, primarily born in tropical oceanic areas, to higher latitudes; and are closely related to flood events, especially in the mid-latitudes. The TME for the region of interest is mostly estimated by the back tracking approach using Lagrangian Analysis Tools (LAGRANTO) from ECMWF Re-Analysis (ERA) data. In this study, we aim to estimate the TME that are related to rainfall in Korea. The major moisture sources of the TME that contribute to heavy rainfall and extreme floods in Korea are identified. The TME is found to have significant connection with extreme events in Korea such as heavy rainfall and extreme flood events. The results show the most of the moisture sources comes from the west Pacific during the warm half of the year and it contributes significantly to the annual TME and is linked to the East Asian monsoon.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2020년도 전력전자학술대회
• /
• pp.346-347
• /
• 2020

This paper presents the two combination methods for leakage current reduction in photovoltaic system PCS. The leakage current in the photovoltaic system generated from the parasitic capacitance existing between the photovoltaic system and ground relevance to common mode voltage caused by PWM switching. Firstly, Leakage current reduced by a PWM method using two carriers with 180-degree phase different. Secondly, the leakage current is more reduced by connecting LCL filter to the mid-point of DC link. This combining method is revealed in PSIM simulation with 1 uF parasitic capacitance.

• 한국해양학회지
• /
• 제18권2호
• /
• pp.104-110
• /
• 1983

海洋 亂流境界層內 亂流運動量輸送의 斷續性 現象에 對하여 그 本質을 把握 하고 流體力學的 인 의미를 규명하기 위한 영구를 기원했다.또한 단속성 현상과 작비현상의 상호관계도 아울러 연구했다. 본 연구를 통해 난류경계층내에서도 중간층에 속하는 z/h=0.067층에서는 단속성의 크기가 평균난류운동량 수송의 408배의 달하고 상부층 즉 z/h=0.1층에서는 270배에 달함이 밝혀져,이제까지 보고되었던 Gordon(1974)이나 Heathersaw(1974)의 30배의 월등히 크다는 것이 새로운 사실이다. 일부 학자들은 단속성현상을 자기현상의 반영 또는 자기의 유통계의 부딪혀 나타나는 현상이라고 해석한바 있으나 (Gordon,1974; Heathersaw,1974),본 연구에서 밝혀진바에 의하면,이는 마찰 Reynolds 수가>$10^{5}$인 실제해양의 난류경계층내 난류운동의 특징이라는 사실이다.

• 한국환경복원기술학회지
• /
• 제5권3호
• /
• pp.15-22
• /
• 2002

To analysis of the embanked slope stability using a jointed reinforcement, the internal stability and the external stability have to be satisfied, respectively. But, because the lengths of ready-made steel-grid were limited, the reinforcements must be connecting themselves to the reinforcing. In this study, the mechanical test was carried out to investigate the tensile failure and the pullout failure at the joint parts of them, which was based on the analysis of reinforced slope in field. Through the tensile tests in mid-air for the jointed steel-grid, the deformation behavior was seriously observed as follows : deformation of longitudinal member, plastic deformation of longitudinal member and of crank part. Those effects were due to the confining pressure and overburden pressure of the surrounding ground. The bearing resistance at jointed part of jointed steel-grid was due to the latter only. The maximum tensile forces were higher about 20kN~27kN than ultimate pullout resistance, but, the results of those was almost the same in mid-soil. The failures of steel-grid occurred at welded point both of longitudinal members and transverse members and of jointed parts. The strength of jointed parts itself got pullout force about 20kN, which was about 65% for ultimate pullout force of the longitudinal members N=2. To the stability analysis of reinforced structure including the reinforced slope, the studying of connection effects at jointed part of reinforcement members must be considered. Through the results of them, the stability of reinforced structures should be satisfied.

• 한국정밀공학회지
• /
• 제19권7호
• /
• pp.71-79
• /
• 2002

A new rapid prototyping process, Variable Lamination Manufacturing using a 4-axis-controlled hotwire cutter and expandable polystyrene foam sheet as a laminating material of the part (VLM-S), has been developed to reduce building time and to improve the surface finish of parts. The objective of this study is to reconstruct the surface of the original 3D CAD model in order to generate mid-slice data using the advancing front technique. The generation of 3D layers by a 4 axis-controlled hot-wire cutter requires a completely different procedure to generate toolpath data unlike the conventional RP CAD systems. The cutting path data for VLM-S are created by VLM-Slicer, which is a special CAD/CAM software with automatic generation of 3D toolpath. For the conventional sheet type system like LOM, the STL file would be sliced into 2D data only. However, because of using the thick layers and a sloping edge with the firstorder approximation between the top and bottom layers, VLM-Slicer requires surface reconstruction, mid-slice, and the toolpath data generation as well as 2D slicing. Surface reconstruction demands the connection between the two neighboring cross-sectional contours using the triangular facets. VLM-S employs thick layers with finite thickness, so that surface reconstruction is necessary to obtain a sloping angle of a side surface and the point data at a half of the sheet thickness. In the process of the toolpath data generation the surface reconstruction algorithm is expected to minimize the error between the ruled surface and the original parts..

• 한국강구조학회 논문집
• /
• 제25권2호
• /
• pp.179-186
• /
• 2013

가새골조는 가장 경제적이고 효과적인 내진시스템 중 하나로써 자주 사용된다. 그러나 중앙부 거셋플레이트를 포함하는 다층 X-형 가새골조의 경우, 실무에서 뿐만 아니라 거동에 대한 연구도 드물다. 그 결과, 이 시스템의 내진 성능과 접합부 설계에 미치는 영향은 아직 잘 알려져 있지 않다. 이 영향을 파악하기 위해 선행해석연구가 수행됐고 이 선행연구는 실험체 제작 전에 수행되어 시스템 거동을 예측하고 효과적인 디자인을 위해 수행되었다. 선행연구 결과를 보면 중앙부(X 교차부) 거셋플레이트와 코너부 거셋플레이트의 거동이 상당히 다르다는 것을 알 수 있다. 선행연구의 결과로 결정된 실제크기의 2층 중심가새골조 실험체의 실험결과와 해석결과를 요약하였고 그 결과를 비교하였다.

• 교육녹색환경연구
• /
• 제20권1호
• /
• pp.29-42
• /
• 2021

본 연구는 학생수가 급격히 감소하고 있는 구시가지역의 중장기 학생수 증감 추이, 통학구역 내 학교위치, 통학거리 등을 조사·분석하여 학교 재배치에 도움이 되는 실질적 방안을 제공하고자 하였다. 이를 위하여 선행연구 조사, 사례지역 분석 등을 실시하여 구시가 지역 학교 재배치 모형을 도출하였다. 구시가지역 학교 재배치 모형 도출은 먼저 대상지역과 학교별 학생수의 중장기적 변화추이를 분석하고, 학교별 학생들의 통학거리를 실측하여 통학구역 내의 학교 위치를 본 연구에서 제시한 지역 맞춤형 학교 배치 격자도 모형을 통해 학교를 배치한다. 그리고 학교 재배치 계획은 인근의 도시정비사업과 연계 등을 통해 학교용지를 확보하고 지역 소생활권 계획과 연계한 중장기적 학교 재배치 계획을 수립하여 시행할 필요가 있다.