• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2007년 추계학술발표대회 개요집
• /
• pp.328-331
• /
• 2007

It was carried out to evaluate microstructure and mechanical properties of friction stir welded(FSW) on magnesium alloys. Two types magnesium alloy was used in this work, AZ31 wrought and AZ91 cast magnesium alloy. Microstructure near the weld zone showed general weld structures such as stir zone(SZ), thermo-mechanically affected zone(TMAZ) and heat affected zone(HAZ). In the AZ91 alloy, the SZ had a fine grain size and $\beta$ phase particles which were well distributed in matrix. It was characterized to redistribute by partial or full re-solution of the $\beta$ phase which is coarse in base metal during FSW processing. The hardness of the SZ slightly increase than the base metal in AZ31 Mg alloy.

• 한국세라믹학회지
• /
• 제43권8호
• /
• pp.498-503
• /
• 2006

A gas turbine blade with thermal barrier ceramic coating is operated at high temperature to increase engine efficiency. Recently, thermal barrier characteristics have been improved by advanced coating technology through microstructure control and increase of adhesion force of the coating layer. More advanced coating materials, rare earth zircon ate ceramics have been studied for replacing YSZ coatings as thermal barrier coatings. In this study, $La_2O_3,\;HfO_2,\;CeO_2,\;Gd_2O_3$ and pure or yttria stabilized zirconia were prepared. Microstructure analysis and the evaluation of mechanical properties such as Hertzian indentation and hardness test were performed.

• 한국세라믹학회지
• /
• 제28권5호
• /
• pp.415-421
• /
• 1991

Influence of Li2O.4B2O3 frit addition on the microstructure and thermal expansion properties of $\beta$-eucryptite ceramics was studied. With 1.0~10.0wt% frit addition, sintering temperature range was enlarged and densified body was obtained. Thermal expansion was increased from -6.67$\times$10-6 $^{\circ}C$-1 of pure sintered body to 1.03$\times$10-6$^{\circ}C$-1 of 6 wt% added body, but this increasement was accompanied by inhibition of thermal expansion anisotropy, so that improved microcracking property.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.513-517
• /
• 1999

High voltage motor(rated 6.6kV and 448kw) has failed in the stator endwinding area during normal service. Experiments on microstructure property were conducted using the control and aged insulations, which were drawn out from stator windings of the high voltage motor. The analyses were characterized using stereozoom microscope(SM), scanning electron microscope(SEM) and energy dispersive X-ray spectroscopy(EDS). SM result shows that large voids are present in the interface between turn insulation and groundwall insulation. SEM results indicated that the groundwall insulation is rarely thermal stress. EDS results showed that chemical elements in the high voltage motor stator insulations were Al, Si, O, K and Fe.

• 한국세라믹학회지
• /
• 제33권7호
• /
• pp.809-815
• /
• 1996

When Li2O.2SiO2 glass was crystallized between the temperature of maximum nucleation and the temperature of maximum crystal growth it was found that the control of heating rate had serious effect on the crystallinity and microstructure and the greatly changed physical properties. Density and elastic modulus tends to increase but thermal expansion coefficient decreased with increased crystallinity. When heating rate between the tempe-rature of maximum nucleation and the temperature of maximum crystal growth was 10~5$0^{\circ}C$/hr. crystallinity was increased to result in the increment of strength. When nuclation was done at 44$0^{\circ}C$ for 5 hours and the temperature of crystal growth was held at 575$^{\circ}C$ strength was increased until crystallinity reached 65% and strength was decreased with higher crystallinity. These phenomena could be explained that even for the same crystallinity different heat rates resulted in different number and size of cracks.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.644-645
• /
• 2006

TiC-and Ti(C,N)-based cermets are excellent in semi-and final finishing of work piece during cutting operations. Typical microstructure of the cermets is a core/rim structure. The undissolved Ti(C,N) cores contribute to their high hardness while the rim phases, (Ti,M1,M2)(C,N)-type solid solutions, play great roles in enhancing the toughness. In this paper, various ultrafine pre-mixed MeC-Ni powders were synthesized and the powders were sintered or hot pressed after mixing in order to control the size and volume fractions of core and rim phases in the system. This paper will present the factors determining the microstructure along with mechanical properties.

• 한국재료학회지
• /
• 제15권9호
• /
• pp.608-612
• /
• 2005

Microstructure and mechanical properties of fibrous $A1_2O_3-(m-ZrO_2)/t-ZrO_2$ composite were investigated depending on the dimensional array. By the change of stacking arrangement of fibrous filaments, 2 and 3-dimensional fibrous composites were successfully obtained without bulk defects such as shrinkage cavity and cracks. The maximum mechanical properties were achieved In the 3-dimensional array composite, due to the fine fibrous and dense microstructure control, in which the values of vickers hardness, fracture toughness and bending strength were about 1507 Hv, $7.2MPa{\cdot}m^{1/2}$ and 650 MPa, respectively.

• 대한금속재료학회지
• /
• 제49권3호
• /
• pp.256-263
• /
• 2011

We have synthesized Al-Co/AlN-Co multilayer films with different layer thicknesses by using a Two-Facing Target Type dc Sputtering (TFTS) system. The deposited films were annealed isothermally at different temperatures and their microstructure, magnetic properties and resistivity were investigated. The magnetization of the as-deposited films was found to be very small, irrespective of layer thickness. It was found that the annealing conditions and layer thickness ratio of Al-Co to AlN-Co (LTR) were able to control the microstructure, as well as the physical properties of the prepared films. The resistivity and magnetization increased and the coercivity decreased with a decreasing LTR. A high resistivity of 2500 ${\mu}{\Omega}-cm$, a magnetization of 360 $emu/cm^3$, and a coercivity of 5 Oe were obtained for the films with LTR=0.175.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.139-142
• /
• 2003

In this study, casting/forging process was used to produce an aluminum lower control arm for automobiles. Firstly, casting experiments were carried out to get an enhanced preform for forging the lower control arm. In the casting experiment, the effect of an additive, Sr, on the mechanical properties such as tensile strength and elongation and the microstructure of a cast preform were investigated. And a finite element analysis was peformed to determine an optimal configuration of the cast preform. Lastly, a forging experiment was carried out to make the final product of aluminum lower control arm by using the above cast preform. In the casting experiments, when 0.025% Sr was added into molten A356, the maximum values of tensile strength and elongation of the cast preform were obtained. In the forging experiment, It was confirmed that the optimal configuration of a cast preform predicted by FE analysis was very useful. The cast/forged product using designed preform was made without any defects.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1700-1702
• /
• 2004

Diamond films including nanocrystallites are grown by microwave plasma chemical vapor deposition using $O_2$ additives and negative substrate bias at growth step. Effects of growth parameters on film properties are characterized by Raman spectra, SEM, and AFM images. It is found that the surface roughness and the microstructure of grown films can be controlled by changing $O_2$ gas ratio. The I-V characteristics are also investigated in terms of growth conditions of diamond films. The surface roughness and the $sp^2$ phase of the grown diamond films turn out to be crucial factors for reducing leakage currents at diamond/metal interfaces.