• 전자공학회논문지D
• /
• 제36D권8호
• /
• pp.1-6
• /
• 1999

MCM 또는 MIC등에서 광대역 임피던스 정합을 위해 데이퍼 선로를 이용할 때 주파수 영역의 전송 특성만을 고려하는 경항이 있다. 본 논문에서는 테이퍼형 비균일 전송선로에서 디지털 펄스가 전송될 때 시간 영역에서 분산과 반사에 의해 나타나는 신호의 왜곡 특성을 해석하였다. 삼각형과 지수분포형 테이퍼에서 입력과 부하임피던스의 비에 따라 상승/하강 시간을 갖는 펄스를 입력 했을 때 지연과 왜곡 특성을 비교하였다. 위상 정수의 분산 모델은 정확도가 우수한 Kirchning-Jansen의 것을 사용하였으며, 삼각형 테이퍼가 지수형 테이퍼에 비해 시간 지연 특성은 좋게 나타났으나 왜곡이 심하게 나타났다. 시간 영역에서 펄스의 반사 신호의 진폭을 계산하여 나타내었다.

• 전기학회논문지
• /
• 제58권6호
• /
• pp.1174-1179
• /
• 2009

In this paper we develop the characteristic of density on non-uniform plasma in different layer of the semiconductor with optically controlled microwave pulses. The transient response of the microwave pulses in different plasma layer has been evaluated by calculating the variation of the reflection function of dielectric microstrip lines. The lines has used under open-ended termination containing optically induced plasma region, which has illuminated a laser source. The characteristics impedances resulting from the presence of plasma are evaluated by the transmission line model. The analyzes the variation of transient response in a 0.01cm layer near the surface for frequency range from 1GHz to 128GHz. The diffusion length LD is larger than compared to the absorption depth $l/_{\alpha}l$. The variation of characteristic response in plasma layer with microwave pulses which has in deferentially localized has been evaluated analytically.

• 전기학회논문지
• /
• 제58권8호
• /
• pp.1585-1591
• /
• 2009

This paper describes a new method for extracting characteristic impedance of transmission line using Substrate Integrated Artificial Dielectric (SIAD). The new procedure to calculate the characteristic impedance of SIAD transmission line is described with the proper equations and basic transmission line theory. The characteristic impedance is determined as an almost fixed value in the proposed method, while it fluctuates according to frequency in the previous method. As the result, the effective dielectric constant of SIAD transmission line is calculated as a fixed value rather than fluctuating one. In order to show the validity of the proposed method, SIAD microstrip lines are simulated and measured, and characteristic impedances and effective dielectric constant are calculated and compared to the previous method.

• 전자공학회논문지A
• /
• 제31A권8호
• /
• pp.16-25
• /
• 1994

The prediction of crosstalk in one of important problems in estimating the EMC of a system for high speed digital signal transmission. Crosstalk curves are shown in terms of characteristic impedance of lines spacing between lines and rise time of pulse by using general multiple coupled transmission line equation and harmonic-balance method. The coupled symmetrical two-line on dielectric material epoxy-glass FR 4(${\varepsilon}_r$), is fabricated to measure crosstalk occuring at the near end and far end of the passive line. The inter-line is inserted to reduce crosstalk between two microstrip lines. The simulation results and the measurement results are shown and found to be very close.

• Journal of electromagnetic engineering and science
• /
• 제15권1호
• /
• pp.31-36
• /
• 2015

The design of a new compact band-pass filter is proposed, which is based on the microstrip composite right- and left-handed transmission- line (CRLH-TL) structure. Particularly, the interdigital coupled (IDC) lines of the CRLH geometry are proposed to be parted by inserting open stubs to meet the specifications on the passband. In addition, there is another pair of stubs to complete the design in a limited space. These are considered in the TL-based analysis and the design parameters are calculated by genetic algorithm optimization. The measurement is shown to be acceptable and agreeable with the circuit and electromagnetic field simulations. In addition, the zerothorder resonance (ZOR) phenomenon is verified.

• 한국전자파학회논문지
• /
• 제18권5호
• /
• pp.547-552
• /
• 2007

본 논문에서는 두 마이크로스트립 라인으로 이루어진 헤어핀 형태의 결합 선로를 이용하여 특성이 개선된 링 하이브리드를 설계하였다. 제안한 구조는 링 하이브리드의 $\lambda/4$ 라인에 헤어핀 형태의 결합 선로를 삽입하여 두 선로가 가까워짐에 따라 선로간의 커플링으로 세 개의 감쇠극이 생겨 넓은 저지대역을 갖는 결합 선로 구조를 이용하여 구성함으로써 링 하이브리드의 크기 감소뿐만 아니라 고조파 제거 특성도 부가하였다. 중심 주파수 2.55 GHz에서 일반적인 링 하이브리드와 특성이 같고 3차 고조파를 포함한 12 GHz까지 -20 dB 이하의 고조파 저지 특성을 가지고 있다. 또한 링 부분의 크기는 기존 링 하이브리드의 1/4 크기로 줄어들었다. 제작된 링 하이브리드의 측정된 주파수 특성 결과는 시뮬레이션 결과와 잘 일치한다.

• 한국전자파학회논문지
• /
• 제23권7호
• /
• pp.768-773
• /
• 2012

본 논문에서는 슬롯을 갖는 삼각 패치형 인공 전송 선로를 이용한 브랜치 라인 하이브리드를 제안한다. 제안된 인공 전송 선로는 구조가 콤팩트하고 슬롯의 파라미터들을 변화시킴으로써 선로의 특성 임피던스와 전기적 길이를 조절하는 데 용이하여 일반적인 전송 선로를 소형화시키는 데 유용하다. 제안된 브랜치 라인 하이브리드는 이러한 직각 삼각형의 인공 전송 선로들을 이용하여 구현되었기 때문에 공간의 활용도가 높고 소형화되었다. 제작된 3 dB 브랜치 라인 하이브리드는 중심 주파수 2.45 GHz의 15 % 대역폭 내에서 ${\pm}0.5$ dB의 결합도 변화 특성과 두 출력 포트 간 $91^{\circ}{\pm}4^{\circ}$의 위상차 특성을 보였다. 또한, 제안된 브랜치 라인 하이브리드의 크기는 일반적인 브랜치 라인 하이브리드 크기의 38 %이다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.111-114
• /
• 2005

The isolation performance of the S-band single-pole single-throw (SPST) monolithic microwave integrated circuit (MMIC) switch with two different RF-interconnection approaches, microstrip and grounded coplanar waveguide (GCPW) lines, are investigated. On-to-off isolation is improved by 5.8 dB with the GCPW design compared with the microstrip design and additional improvement of 6.9dB is obtained with the coplanar wire-bond interconnection (CWBI) at 3.4 GHz. The measured insertion loss and third-order inter-modulation distortion (IMD3) are less than 2.43 dB over 2.5 CHz $\sim$ 4 GHz and greater than 64 dBc.

• 전자공학회논문지D
• /
• 제35D권1호
• /
• pp.8-15
• /
• 1998

An analysis of the microstripline is started as an assumption of the axial & transveral current distribution. Applying the boundary conditions to the scalar wave equations of a electric & magnetic potential, the two simultaneous coupled integral equations are produced. The electronmagnetic fields in microstrip line can be obtained by solving these two coupled integral equaltion. In general, either a numerical analysis method or a Galerkin method was used to solve them. In this paper, a residue theorem is proposed to solve them. The electromagnetic fields are expressed as integral equations for LSE and LSM mode in the spectral domain. Applying a residue theorem to the Fourier transformed equation and Fourier inverse transformed equation which is necessary for interchanging the space domain and the spectral domain, the electromagnetic fields are expressed as algebraic equations whichare relatively easier to handle. the distributions of the electromagnetic field are shown at the range of -5w/2.leq.x.leq.5w/2, 0.lep.y.leq.4h for z=0. It agrees well with the results of the Quasi-TEM mode analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.435-438
• /
• 1988

The purpose of this study is to evaluate the discontinuity effects of two kinds of transmission lines. i.e. the strip line and the microstrip line which are popular transmission structures.