• Journal of Life Science
• /
• v.24 no.1
• /
• pp.54-60
• /
• 2014

Aromatic hydrocarbons are toxic environmental pollutants that are detrimental to the ecosystem and human health. Among them, chlorotoluene and nitrotoluene are toxic to hydrobios and irritate the skin, eyes, and respiratory organs of humans. We herein report the development of recombinant microbial biosensors for cheap and rapid monitoring of chlorotoluene and nitrotoluene compounds. Plasmids were constructed by inserting the xylR regulatory gene for BTEX (benzene, toluene, ethylbenzene, and xylene) degradation into upstream of Po' (the DmpR activator promoter Po with the deletion of its own upstream activating sequences) or Pu (the cognate promoter of XylR)::lacZ (the ${\beta}$-galactosidase gene) and transformed into Escherichia coli $DH5{\alpha}$. In the presence of inducers, the biosensor cells immobilized in agarose developed a red color in 1-2 h due to the hydrolysis of chlorophenol red ${\beta}$-D-galactopyranoside (CPRG), a substrate of ${\beta}$-galactosidase that was expressed by the inducers. Among BTEX, high responses were specifically observed with o-, m-, p-chlorotoluene ($0.1{\mu}M-100 mM$) and o-, m-, p-nitrotoluene (0.1 mM-100 mM). Po' demonstrated higher responses than those with Pu. The biosensors immobilized in agarose showed good stability after 21 days' storage at $4^{\circ}C$, and responses in untreated wastewater spiked with chlorotoluene and nitrotoluene, suggesting they can be used to detect compounds in wastewater.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.2
• /
• pp.179-185
• /
• 2007

A new technology that utilizes a microbial fuel cell (MFC) has been developed to generate electricity directly from the oxidation of organic matters such as carbohydrates or complex organics in wastewater. Fermentation of these organic matters results in production of volatile fatty acids (VFAs), alcohols, $CO_2$ and $H_2$. We investigated the electricity-producing potential of the VFAs and actual food processing wastewater using a two-chambered MFC. The electrons produced by acetate degradation were proportional to acetate concentration in the medium. Acetate concentration and generated power were linearly correlated at a low range or acetate concentration (< 8 mg/L), but at above 8 mg/L of acetate the power produced was maintained at 0.1 mW. When butyrate was added to the anode acclimated to acetate, there was a lag period of 30 hr for electricity generation. However, when propionate was added to the same anode bottle, lag periods were not existed. The wastewater from baby food processing generated the maximum power density of $81{\pm}7\;mW/m^2$ of electricity and exhibited the Coulombic efficiencies of 27.1% and 40.5% based on TCOD and SCOD, respectively. Sugars in the food processing wastewater were reduced within 50 h from 230 mg/L < 30 mg/L.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6B
• /
• pp.695-701
• /
• 2006

A toluene-degrading bacterial strain was isolated from a mixed culture that was maintained using toluene as a sole carbon and energy source. The isolated bacterium was classified as Pseudomonas sp. TBD4 based on the close relationship to bacteria belonging to this genus. A bottle study to determine biodegradation rates of individual aromatic compounds showed that the biodegradation was faster in the order of toluene, benzene, styrene, and p-xylene. However, when various mixtures were subjected to TDB4, styrene was degraded at the highest rate, indicating that both toluene and p-xylene could stimulate the degradation of other substrates whereas styrene played as an inhibitor. In addition, the mixed culture and TDB4 were inoculated to the bioactive foam reactor (BFR), and the reactor performance and the corresponding change of microbial community were monitored using the fluorescent in situ hybridization (FISH) method. When an inlet concentration of the VOC mixture increased to greater than 250 ppm, the overall removal efficiency dropped significantly. The FISH measurement demonstrated that the ratio of TDB4 to the total bacteria also decreased to less than 20% along with the decline in removal efficiency in the BFR. As a result, the periodic addition of the pre-grown TDB4 might have been beneficial to achieve a stable performance in the BFR operated over an extended period.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.4
• /
• pp.346-352
• /
• 2023

Cadusafos, an organophosphorus insecticide, has been commonly used against various pests worldwide. Organophosphorus pesticides have shorter half-lives and lower toxicities than organochlorine pesticides. However, excessive use of Cadusafos can increase pest resistance and issues with acetylcholine biomagnification, potentially resulting in human toxicity. In this study, we investigated the effect of a Cadusafos-degrading microbial agent (CDMA) prepared using Sphingobium sp. Cam5-1, which was previously reported to effectively degrade residual Cadusafos in soil. Experiments were conducted under both controlled laboratory and greenhouse field conditions. Under laboratory conditions, CDMA (10⁶ cfu/g soil application rate) decomposed 97% of Cadusafos in the soil in the untreated control after 21 days. Additionally, when CDMA (10⁶ cfu/g soil) was mixed with quicklime, 99% of Cadusafos was decomposed within 3 days. Under greenhouse field conditions, the combined effect of CDMA (10⁶ cfu/g soil) and quicklime was not observed. However, CDMA (10⁶ cfu/g soil) application alone was capable of decomposing 91% of Cadusafos after 3 days. These results indicate that CDMA can effectively decompose high residual levels of Cadusafos in soils under field conditions using a low inoculum rate.

• Journal of Environmental Impact Assessment
• /
• v.14 no.4
• /
• pp.147-155
• /
• 2005

This study was designed to investigate the effect of plant as a botanical air purification on the indoor pollution by formaldehyde. Three indoor plants such as Dracaena marhginata, Spathiphyllum and Dracaena reflexa, were placed in the artificially contaminated reactor under laboratory condition. Both plant and soil effects on removal of formaldehyde from contaminated indoor air were observed. Reductions in the formaldehyde levels appeared to have been associated with soil medium factors as well as plant factors. The effect of soil on formaldehyde reduction was high in the early stage of the experiment and the results suggest that sorption could be more important factor than microbial degradation in the initial dissipation of contaminants in the soil. It was suggested that the effect of plant on formaldehyde reduction might be related to the plant species, total leaf surface area of plant, degree of contribution of soil medium, and exposed concentration level. The results of this study showed that air purification using plants is an effective means of reduction on indoor formaldehyde level, though, utilization of soil media with high sorption capacity and/or supplementary purifying aids were also suggested when the source is continuous or exposed concentration level is high.

• Environmental Engineering Research
• /
• v.23 no.1
• /
• pp.46-53
• /
• 2018

This study explores the environmentally innovative and low-impact technology, a zero food waste system (ZFWS) that utilizes food waste and converts it into composts or biofuels and curtails carbon emissions. The ZFWS not just achieves food waste reductions but recycles food waste into fertilizer. Based on a fermentation-extinction technique using bio wood chips, the ZFWS was employed in a field experiment of the system installed in a large-scale apartment complex, and the performance of the system was examined. The on-site ZFWS consisted of three primary parts: 1) a food waste slot into which food waste was injected; 2) a fermentation-extinction reactor where food waste was mixed with bio wood chips made up of complex enzyme and aseptic wood chips; and 3) deodorization equipment in which an ultraviolet and ozone photolysis method was employed. The field experiment showed that food waste injected into the ZFWS was reduced by 94%. Overall microbial activity of the food waste in the fermentation-extinction reactor was measured using adenosine tri-phosphate (ATP), and the degradation rate of organic compounds, referred to as volatile solids, increased with ATP concentration. The by-products generated from ZFWS comply with the national standard for organic fertilizer.

• Journal of Environmental Science International
• /
• v.17 no.1
• /
• pp.7-17
• /
• 2008

Simultaneous removal of $NH_3,\;H_2S$ and toluene in a contaminated air stream was investigated over 185 days in a biofilter packed with Zeocarbon granule as microbial support. In this study, multi-microorganisms including Nitrosomonas and Nitrobacter for nitrogen removal, Thiobacillus thioparus (ATCC 23645) for $H_2S$ removal, and Pseudomonas aeruginosa (ATCC 15692), Pseudomonas putida (ATCC 17484) and Pseudomonas putida (ATCC 23973) for toluene removal were used simultaneously. The empty bed residence time (EBRT) was 40-120 seconds and the feed (inlet) concentrations of $NH_3,\;H_2S$ and toluene were 0.02-0.11, 0.05-0.23 and 0.15-0.21 ppmv, respectively. The observed removal efficiency was 85%-99% for $NH_3$, 100% for $H_2S$, and 20-90% for toluene, respectively. The maximum elimination capacities were 9.3, 20.6 and $17g/m^3/hr\;for\;NH_3,\;H_2S$ and toluene, respectively. The results of kinetic model analysis showed that there were no particular evidences of interactions or inhibitions among the microorganisms, and that the three bio degradation reactions took place independently within a finite area of biofilm developed on the surface of the Zeocarbon carrier.

• KSBB Journal
• /
• v.25 no.3
• /
• pp.230-238
• /
• 2010

A microbial strain having high keratinase activity was isolated from the soil of poultry factories of Gyeonggi or Chungcheong-do. The isolated strain was identified as Bacillus sp. based on its morphological and biochemical characteristics. In this study, the optimal conditions for the production of keratinase by this strain were investigated. The optimal medium composition for the keratinase production was determined to be 3.5% chicken feather as carbon source, 1.0% tryptone as organic nitrogen source, 1.0% $KNO_3$ as inorganic nitrogen source and 0.05% KCl, 0.05% $KH_2PO_4$, 0.03% $K_2HPO_4$ as mineral source and 0.01% yeast extract as growth factor. The optimal temperature and pH was $40^{\circ}C$ and 8.5 with shaking culture (200 rpm), respectively. The maximum keratinase production reached to 123 units/ml after 42 hr of cultivation under the optimal condition. When the hair was used as the sole carbon source, the maximum enzyme activity was 88 units/ml after 120 hr and in this case, the hair added in the medium was not degraded completely but got thinner than the control by 20%.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.5
• /
• pp.9-17
• /
• 2014

This paper reported the use of real-time polymerase chain reaction (PCR), denaturing gradient gel electrophoresis (DGGE), and the culture-based method in the intrinsic bioremediation study at a petroleum contaminated site. The study showed that phenol hydroxylase gene was detected in groundwater contaminated with benzene, toluene, ethylbenzene, xylene isomers (BTEX) and methyl tert-butyl ether (MTBE). This indicated that intrinsic bioremediation occurred at the site. DGGE analyses revealed that the petroleum-hydrocarbon plume caused the variation in microbial communities. MTBE degraders including Pseudomonas sp. NKNU01, Bacillus sp. NKNU01, Klebsiella sp. NKNU01, Enterobacter sp. NKNU01, and Enterobacter sp. NKNU02 were isolated from the contaminated groundwater using the cultured-based method. Among these five strains, Enterobacter sp. NKNU02 is the most effective stain at degrading MTBE without the addition of pentane. The MTBE biodegradation experiment indicated that the isolated bacteria were affected by propane. Biodegradation of MTBE was decreased but not totally inhibited in the mixtures of BTEX. Enterobacter sp. NKNU02 degraded about 60% of MTBE in the bioreactor study. Tert-butyl alcohol (TBA), acetic acid, 2-propanol, and propenoic acid were detected using gas chromatography/mass spectrometry during MTBE degraded by the rest cells of Enterobacter sp. NKNU02. The effectiveness of bioremediation of MTBE was assessed for potential field-scale application.

• Korean Journal of Ecology and Environment
• /
• v.39 no.3 s.117
• /
• pp.331-339
• /
• 2006

This research was carried out to understand the impacts of thickness of sand capping to control phosphorus release from sediment into overlying water. As capping effectively retards release flux, phosphorus concentration in water body can be maintained if phosphorus release rate was kept under microbial degradation rate. With capping thickness increases, deaeration rate become less, while reaeration coefficient become higher. Phosphorus release rate and capping thickness were linearly correlated. The results of regression analysis indicated that phosphorus release can be controlled effectively by sand capping of least 20${\sim}$40 mm thickness.