• 지구물리와물리탐사
• /
• 제11권1호
• /
• pp.41-51
• /
• 2008

해양성 현무암층에 대해 현장에서의 속도와 공극률의 관계를 알기 위해서 Juan do Fuca 해저산맥의 동쪽 측면으로부터 채취한 현무암 시료들에 대해 최고 40MPa 구속압력(confining pressure)하에서 균열 특성을 고려하며 P파와 S파 속도를 측정하였다. 구속압력에 따른 속도의 변화는 미세균열의 닫힘(microcrack closure)에 기인한다고 가정하고, Kuster-$Toks{\ddot{o}}z$ 이론을 이용하여 미세균열의 개구비 스펙트라(micro-crack aspect ratio spectra)를 측정하였다. 그 결과 서로 다른 시료들의 정규화된 개구비 스펙트라들이 유사한 특성을 갖는다는 것을 보여주었다. 그리고 나서 정규화된 개구비 스펙트럼(spectrum)으로부터, 각 공극률에 대한 개구비 스펙트럼을 계산함으로써 이론적인 속도와 공극률의 관계를 만들었다. 또한 구속압력에 따른 미세균열 닫힘을 고려하여 구속압력의 함수로서의 속도-공극률 관계를 얻을 수 있었다. 개구비 스펙트라를 고려한 이론적인 관계는 대기압하에서 측정된 100개가 넘는 시료들에 대해 관찰된 관계와 잘 일치하고, 넓은 범의의 공극률에 대해 일반적으로 관찰되는 압력 의존적인 관계와도 잘 일치된다. 실험에서 유도된 자료들과 이론적으로 계산된 값들의 일치를 통해 Juan de Fuca 해저산맥의 동쪽 측면으로부터 얻어진 현무암 시료의 속도와 공극률의 관계는 균열의 특성(즉, 정규화된 개구비 스펙트라)과 균열 담힘에 의해 설명되어질 수 있음을 알 수 있다.

• 한국진공학회지
• /
• 제17권6호
• /
• pp.501-510
• /
• 2008

비행체를 레이더의 시야에 들어나지 않도록 하기 위한 은신 (stealth) 기술은 일반적으로 비행체 표면에 특수도료를 도포하는 방식을 사용하여 실현하고 있지만 요즈음 플라즈마의 전자기파 흡수 능력을 이용하려는 연구가 활발히 진행되고 있다. 대기압 플라즈마가 은신기술에 응용될 수 있는가 우선 물리적인 타당성을 알아보기 위해 이 논문에서는 대기층에서 비행하는 비행체 표면을 어떤 정도의 플라즈마로 얼마나 덮어야 원하는 은신 기능을 나타낼 수 있는지 판단할 수 있도록 비 자장, 비 균일, 평판 플라즈마 모델을 사용하여 계산한 결과를 제시하고 논의한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1166-1171
• /
• 2008

Through Korean high speed train development project "G7 Leading Technology Development Project" from 1996 to 2002, HSR-350X has been developed. It can run the maximum operating speed of 350 km/h. Based on this technology, KTX-2 which will be served commercially has been developed till 2007. This paper introduces the aerodynamic analysis of the High-Speed EMU and shows the results of optimized aerodynamic nose shape design techniques and clean pantograph panhead original techniques study. These are the important parts of developments for high speed train which maximum speed is 400 km/h. Especially for decrease of tunnel micro pressure waves, the optimized nose area distributions were derived and the characteristics of micro pressure wave were analyzed. The robust optimized pantograph panhead shapes investigated to improve the performance and decrease the vortex flow which is thought to be its noise source. These shapes are clean and robust to external disturbances like unsteady accelerated flow or side wind was derived. Finally aerodynamic performances was verified with PIV and smog visualization by wind tunnel test.

• 동력기계공학회지
• /
• 제21권3호
• /
• pp.102-107
• /
• 2017

A tungsten inert gas (TIG) welding method was used for the bonding of stainless steel. TIG welding using inert gas (He or Ar gas) is a method to prevent oxidation and nitriding of materials and to combine non-ferrous metals. This method has the advantage of obtaining a smooth weld surface. In this study, the welding characteristics of 304 stainless steel welded by TIG welding method were analyzed by using nondestructive technique. Ultrasonic and Acoustic Emission (AE) was applied to evaluate the micro-damage of TIG welded 304 stainless steel. The velocity and damping coefficient of ultrasonic wave showed a slight difference in HAZ, which is the welding part of stainless steel. The AE parameters of average frequency, rise time and event were analyzed for the dynamic behavior of stainless steel during loading. Optimal AE parameters for evaluating the degree of damage to the specimen have been derived. Fractograph and metal structures of 304 stainless steel using SEM and optical microscope were discussed.

• 대한조선학회논문집
• /
• 제34권1호
• /
• pp.41-49
• /
• 1997

작은 파 기울기(Ak=0.01)를 갖는 Stokes 파/평판의 경계층 및 반류에 대하여 엄밀 및 근사 자유표변 경계조건을 적용하여 Navier-Stokes 식을 수치해석하였다. 거시유동에서는 외부 흐름 압력 변화가 유선방향의 속도 성분을 가속 혹은 감속시키며 교차 유동의 방향 변화를 야기시킨다. 특히 반류는 역(逆)압력기울기 영역에서보다 순(順)압력기울기 영역에서 그 반응이 크며 정수 중에서의 값을 평균치로 하지 않고 편향되는 반류 편향 특성을 갖는다. 미시유동에서는 자유표면 경계조건이 경계층 및 근접/중간 반류영역에서 큰 영향을 미친다. 차수크기 추정은 계산 결과와 잘 일치하였으며 근사 자유표변 경계조건은 상당한 오차를 유발시킴을 알 수 있다.

• 동력기계공학회지
• /
• 제7권1호
• /
• pp.82-85
• /
• 2003

This study is to look at the effect for deformation of Polyethylene, on the wave forms produced by tensile test. Signals collected were then classified visually into three types according to their shapes in the time and frequency domain. Each type should contain signals which could be correlated to a certain micro failure mechanism that occurs during the tensile process. The result showed that the acoustic emission method could be effectively used for analysis of fracture mechanism in Polyethylene structures.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.622-627
• /
• 2001

Microjet flows are often encountered in many industrial applications of micro-electro-mechanical systems as well as in medical engineering fields such as a transdermal drug delivery system for needle-free injection of drugs into the skin. The Reynolds numbers of such microjets are usually several orders of magnitude below those of larger-scale jets. The supersonic microjet physics with these low Reynolds numbers are not yet understood to date. Computational modeling and simulation can provide an effective predictive capability for the major features of the supersonic microjets. In the present study, computations using the axisymmetic, compressible, Navier-Stokes equations are applied to understand the supersonic microjet flow physics. The pressure ratio of the microjets is changed to obtain both the under- and over-expanded flows at the exit of the micronozzle. Sonic and supersonic microjets are simulated and compared with some experimental results available. Based on computational results, two microjets are discussed in terms of total pressure, jet decay and supersonic core length.

• Transactions on Electrical and Electronic Materials
• /
• 제9권5호
• /
• pp.181-185
• /
• 2008

Using the extensional vibration mode of PZT ring, a piezopump is successfully made. The PZT ring is polarized with thickness direction. The traveling extensional wave along the circumference of the ring is obtained by dividing two standing waves which are temporally and spatially phase shifted by 90 degrees from each other. The proposed piezopump is consisted of coaxial cylindrical shells that are bonded piezoelectric ceramic ring. The pump takes an unobtrusive operation into the simple displacing mechanism using peristaltic traveling waves without the physical moving parts. The finite elements analysis on the proposed pump model is carried out to verify its operation principle and design by the commercial FEM software. Components of piezopump were made, assembled, and tested to validate the concepts of the proposed pump and confirm the simulation results. The performance of the proposed piezopump is about 580 ${\mu}l/min$ in flow rate with the highest pressure level of 0.85 kPa, when the driving voltage is 150 $V_p$, 57 kHz.

• Biomolecules & Therapeutics
• /
• 제14권1호
• /
• pp.19-24
• /
• 2006

Atrial chambers serve as mechanosensory systems during the haemodynamic or mechanical disturbances, which initiates arrhythmia. Atrial myocytes, lacking t-tubules, have two functionally separate sarcoplasmic reticulums (SRs): those at the periphery close to the surface membrane, and those at the cell interior (center) not associated with the membrane. To explore possible role of fluid pressure (FP) in the regulation of atrial local $Ca^{2+}$ signaling we investigated the effect of FP on subcellular $Ca^{2+}$ signals in isolated rat atrial myocytes using confocal microscopy. FP was applied to whole area of single myocyte with pressurized automatic micro-jet (200-400 $mmH_2O$) positioned close to the cell. Application of FP enhanced spontaneous occurrences of peripheral and central $Ca^{2+}$ sparks with larger effects on the peripheral release sites. Unitary properties of single sparks were not altered by FP. Exposure to higher FP often triggered longitudinal $Ca^{2+}$ wave. These results suggest that fluid pressure may directly alter excitability of atrial myocytes by activating $Ca^{2+}$-dependent ionic conductance in the peripheral membrane and by enhancing spontaneous activation of central myofilaments.

• 제어로봇시스템학회논문지
• /
• 제11권5호
• /
• pp.451-456
• /
• 2005

This paper describes three kinds of experiments and analysis of their results related to human tactile sensitivity using an integrated tactile display system. The device can provide vibration, normal pressure and lateral slip/stretch which are important physical quantities to sense texture. We have tried to find out the efficient method of stimulating, limitation of surface discrimination by kinesthetic farce feedback and the effectiveness of the combination of kinesthetic force and tactile feedback. Seven kinds of different stimulating methods were carried out and they are single or combination of the kinesthetic force, normal static pressure, vibration, active/passive shear and moving wave. Both prototype specimen and stimulus using tactile display were provided to all examinees and they were allowed to answer the most similar sample. The experimental results show that static pressure is proper stimulus for the display of micro shape of the surface and vibrating stimulus is more effective for the display of fine surface. And the sensitivities of active touch and passive touch are compared. Since kinesthetic force feedback is appropriate to display shape and stiffness of an object, but roughness display has a limitation of resolution, the concurrent providing methods of kinesthetic and tactile feedback are applied to simulate physical properties during touching an object.