• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.238-240
• /
• 2006

In this study, we designed a digital inclinometer to measure the angle and acceleration signals. Digital inclinometer consists of a tilt sensor, accelerometer, one-chip micro controller and BlueTooth module. Using the developed system, we made an experiment with Roll. The subject is laid on the Roll and rises each foot $90^{\circ}$ and $45^{\circ}$ up, and measures angle and acceleration signals with 100Hz sampling frequency. Through several tests, we could find the possibilities and usefulness which can evaluate normality / abnormality of body posture objectively.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.04a
• /
• pp.75-79
• /
• 2008

To control the lead storage batteries it is necessary to consider the characteristics of each battery connected in series. In this study, the charging and discharging characteristics of sealed lead storage batteries 12V/1.2A was investigated one by one through experiments. The results of the experiment shows that one should consider the state of each battery to prevent overcharge or deep discharge. Also, we designed an equipment to measure battery voltages simultaneously using micro-controller. This equipment will be useful for monitoring batteries at PV generation system.

• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.257-264
• /
• 2014

Through MCU model, Radio Frequency communication is completed using universal asynchronous receiver and transmitter. The communicatin with PC and MCU is completed using RS-232 cable. At first interconnected communication with PC and MCU is necessary for RF communication because tha UART is based technique for RF communication. Program imbeded in microcontroller unit is ran during RF signal is transmitted to other RF module. Data connected with PC and MCU is transmitted between PC and MCU during PC and MCU is connected.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.544-545
• /
• 2015

오늘날 자동차에서 배출되는 유해 가스로 인한 지구 온난화를 막기 위하여 많은 환경규제를 받고 있다. 때문에 대부분의 국가들은 출시되는 자동차나 운행 중인 자동차에 대하여 배출가스 검사를 의무적으로 실시하여 배출가스에 의한 대기오염을 줄일 수 있도록 법제화하고 있다. 본 논문에서는 "배출가스 검사/진단시스템" 개발에 대한 고찰을 통하여 배출가스, RPM, 소음을 측정할 수 있는 MCU(micro controller unit) 기반의 데이터 계측기에 대한 설계방안을 제시하고자 한다. 또한, MCU를 기반으로 배출가스(HC, CO, CO2 등) 데이터 확보를 위한 광학 필터처리 기술 및 신호처리 알고리즘을 검토하였다. 자동차의 RPM을 측정할 수 있는 알고리즘에 대한 검토와 배출가스 및 소음을 측정할 수 있는 알고리즘을 개발하여 RS-485, TCP/IP 기반으로 데이터를 전송할 수 있는 배출가스 검사시스템을 제시하고자 한다.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2534-2536
• /
• 1999

This paper suggested a new sensorless driving strategy for brushless de motor which can improve the conventional degradation of highspeed operating performances, lowspeed operating performances and starting performances caused by applying general single pwm switching frequency. By varying PWM switching frequency during operating time, the proposed method can get some desired upper performances. For confirming the validity of the proposed method, the sensorless driving system is implemented with an rPM module and 87c196MC micro controller.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.137-140
• /
• 2008

The purpose of PEEP is to increased effect reparation in lung. Recently trend of technology is possible to have multi-level or to control freely for variety breathing pattern or breathing mode. Those new technology need some issue like electronic controlled actuator(solenoid), PEEP valve of special structure and control software in micro controller. This paper brief to develop actuator(solenoid) and PEEP valve. This development is to make commercial product of MEKICS.Co.LTD Electronic controlled actuator(Solenoid) is to make force depend on current in linear. And force is convert to pressure in PEEP valve. Major technical issue are how to make the valve with continuous force even dough moving and how to optimize to convert force - pressure.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.167-168
• /
• 2006

This paper is concerned about the development system that the bead width's size can be controlled. In order to control the bead width, DC motor driving slide on auto carriage is used. The adjustment of bead width is carried by amplitude and weaving shape is controlled by MCU(Micro Controller Unit). We confirmed the result by tracking experiments.

• Advances in Energy Research
• /
• v.2 no.1
• /
• pp.47-59
• /
• 2014

Back-to-back STATCOM configuration is an extension of STATCOM in which the reactive power at two-sides and the real power flow through the DC link can be controlled concurrently and independently. This flexible operation brings many advantages to the micro-grids, distributed generation based systems, and deregulated power systems. In this paper, the dynamic control characteristics of the back-to-back STATCOM is investigated by simulating the detailed converter-level model of the converters in PSCAD. Various case studies in a single-machine test system are studied to present that the real power control feature of the BtB-STATCOM, even with a simple controller design, can enhance the transient stability of the machine under different fault scenarios.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.10
• /
• pp.1845-1849
• /
• 2010

We have proposed and fabricated a Buck-Boost DC to DC Converter for Thermoelectric generator (TEG) with constant output voltage suitable for battery chargers or constant voltage supplies in the range of several watt. The experimental and simulation results have shown that the proposed method allows stable operation with maximum 86% power transfer efficiency. The proposed circuit has a merit in cost and miniaturization of a system compared to conventional MPPT algorithms, because the proposed method adopts only analog circuit without DSP or micro controller unit for calculating peak power point by iterative methods.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.5
• /
• pp.741-747
• /
• 2008

This paper proposes a new concept of IDSP(Intelligent Digital Switchgear Panel) which can solve the problem of the safety, the reliability and the convenience to correspond to the requirement of the general electric customer or electric power company under the ubiquitous-based home automation environments. By analyzing their requirement functions, a 32-bit micro processor is adopted as main controller to support the designed functions efficiently. The DSP-based single phase power management device is utilized to collect the electric power information and the ethernet convertor to communicate through internet among the IDSPs and the remote computer system. In the proposed IDSP, the several functions are implemented such as the earth leakage level display and waveform transmission, the electric fee display, the voltage management, the load management and the load control function. Finally, the prototype of the IDSP is made experimently based on the designed results, and then the effectiveness is verified by testing its basic functions.