• Journal of Hospice and Palliative Care
• /
• v.13 no.3
• /
• pp.169-180
• /
• 2010

Purpose: This study was to identify the death recognition, meaning in life, and death attitude of participants in the death education program. Methods: A survey was conducted, and 205 data were collected. Descriptive statistics, ${\chi}^2$-test, ANOVA, and Duncan test were used. Results: 1) The followings were the characteristics of death recognition shown by the participants. Over half of the participants said that they had given some thoughts on their deaths, that they had agreeable view on death acceptance, and that diseases and volunteer works made them think about their deaths. Moreover, suffering, parting with family and concerns for them, etc. were the most common reasons for the difficulty of accepting death. As for 'the person whom I discuss my death with', spouse, friend, and son/daughter were the most chosen in this order. Lastly, the funeral type that most of the participants desired was cremation. 2) The means of meaning in life and death attitude were $2.92{\pm}0.29$ and $2.47{\pm}0.25$, respectively. There were significant differences between health status, meaning in life and death attitude. 3) A significant positive corelationship was found between meaning in life and death attitude (r=0.190, P=0.001). Conclusion: For an effective death education program that would fit each individual's situation, an educational content that can make a person understand the meaning of his or her life and death, includes knowledge to lessen the fear and anxiety of death, and helps a person heal from the loss of a family member is absolutely necessary.

• Restorative Dentistry and Endodontics
• /
• v.27 no.2
• /
• pp.183-195
• /
• 2002

흑색 색소를 형성하는 그람음성 혐기성 세균은 급성 임상 증상을 가진 환자의 근관에서 자주 발견되는 세균으로서 세균 및 세균의 성분과 산물이 치근단 병소의 생성과 밀접하게 연관된 것으로 알려져 있다. 본 연구는 흑색 색소를 형성하는 그람음성 혐기성 세균 중 가장 발현율이 높은 Prevotella nigrescens가 배양된 세포에 미치는 세포 독성을 연구하고자 하였다. 두 가지 세포주 및 사람의 치은섬유모세포를 일차배양하여 사용하였으며, 세포주에 따른 독성 발현에 차이가 있는지를 비교하였다. P. nigrescens ATCC 33563 표준 균주 및 임상 균주로는 환자의 감염된 근관으로부터 165 rRNA primer를 사용한 중합효소 연쇄반응으로 P. nigrescens 6 균주를 동정하여 사용하였다. 세균배양액, 세균의 초음파 추출단백질 및 lipopolysaccharide (LPS)를 MC3T3-El 조골세포, NIH3T3 섬유모세포 및 치은섬유모세포에 첨가한 후 MTT분석법으로 세포의 활성을 측정하였으며, 세포의 형태학적 변화를 도립현미경으로 관찰하였다. 세균배양액을 100$\mu\textrm{l}$ 첨가한 경우는 세가지 세포주 모두에서 통계적으로 유의하게 세포의 활성을 억제하였다. 세균의 초음파 추출단백질 12.5$\mu\textrm{g}$/ml 와 25$\mu\textrm{g}$/ml 는 NIH3T3세포에 통계적으로 유의한 세포독성을 보였다. 세 가지 세포주에 대한 LPS의 세포 독성 효과는 첨가된 LPS의 농도 및 균주에 따라 다양하게 나타났다. 심하게 손상된 세포는 세포의 단일층이 수축되고 세포가 응집되었으며 세포가 배양용기의 바닥에서 떨어지는 양상이 도립 현미경하에서 관찰되었다. 본 연구의 결과 P. nigrescens가 숙주 반응을 조절하여 치수 및 치근단 병소의 유발 및 악화에 기여하는 세균으로 작용할 수 있음을 시사한다. 조직과 함께 제거하고 포르말린에서 48시간 고정시킨 후 파라핀에 포매한 다음에 micro-tome을 사용하여 6$\mu\textrm{m}$로 serial section을 시행하였다. 정중선 부위의 시편에 Hematoxylin-Eosin staining을 시행한 후 Olsson, Orstavik 그리고 Mjor 등의 방법에 따라 조직학적 변화를 관찰한 후 slight(1), moderate(2), severe inflammation(3)의 단계로 분류하였다. 얻어진 결과를 통계처리 프로그램인 Jandel사의 Sigmastat을 이용하여 Kruskal Wallis Test로 통계처리를 하였다. 결과 : (Table omitted) 결론 : 1) Pulp Canal Sealer를 제외한 모든 군에서 시간이 지남에 따라 유의성 있게 염증이 감소되는 양상을 보였다(p<0.05). 2) Pulp Canal Sealer는 1주, 2주, 12주에서 강한 염증반응을 보였다. 3) AH 26과 AH Plus에서는 1주, 2주에서 강한 염증반응을 보였으나 12주에서는 염증반응이 감소하였다. 4) 새로 개발된 봉함제 Adseal-1,2는 1주, 2주에서는 가장 약한 염증반응을 보이나 4주, 12주 후에는 AH Plus와 비슷한 수준의 염증 반응을 보였다. 5) Pulp Canal Sealer를 제외한 모든 군에서 인정할 만한 생체친화성을 보였다. 6) Adseal-2가 Adseal-1에 비하여 전반적으로 낮은 염증반응을 보였다. 7) 각 군간 결과의 차이에 통계적 유의성은 없었다(p>0.05).mmunity. Then, a hierarchical language is to defeat its own purpose.중 행정부가 북한에 대해 실시한 포용정책이 어떠한 성과를 거두고 어떠한 문제점을 간과하고 있는가에 대해 논의하고, 대북 정책의 새로운 지평을 논의하는 것을 목적으로 하고 있다. 1) 포용 정책은 세계의

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.3
• /
• pp.292-300
• /
• 2013

In this study, we examine the palatability and physicochemical properties of rice in the year, when there was 10% increase in yield compared to normal year due to daily temperature range and sunshine hours. The results of the analysis of rice yield over the last 20 years (1993-2012) showed 10% difference between the yield in 2000, which was normal, and that in 2001. With regard to the crop weather condition during the ripening period in 2001 compared to 2000, the daily range and sunshine hours were higher, but the mean temperature was similar. The rice yield in 2001 was 9.8% higher than that in 2000 due to the increased number of spikelets per panicles and ratio of ripened grain. In terms of chemical traits, protein, Mg, and K contents decreased in 2001 compared to 2000, but amylose content increased. Trough and final viscosity assessed with a Rapid Visco Analyser were significantly higher in 2001 than 2000. The quality of cooked rice was measured through the Toyo Mido Meter Glossiness Value (TGV) instead of a palatability score because a sensory test produces relative comparison values rather than absolute values. The correlation coefficients between the sensory evaluation parameters and the TGV in several rice materials harvested in two years showed a highly significant positive correlation ($r=0.81^{**}-0.89^{**}$, n=27-47). TGV was also significantly higher in 2001 than in 2000. The results suggested that the palatability of cooked rice was good in 2001 with about 10% increase in rice yield compared to normal year in 2000 due to daily temperature range and sunshine hours.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.3
• /
• pp.214-223
• /
• 2017

A total of 15 different corn hybrids, Kwangpyeongok, Gangdaok, Yanganok, Singwangok, Jangdaok, Cheonganok, Cheongdaok, Andaok, Dapyeongok, Pyeongkangok, Pyeonganok, Daanok, Sunwon 184, Gangilok, and P3394 was used to investigate the growth and yield depending on the sowing date. The sowing dates were April 5, June 25, and July 5 and each experiments was performed in triplicste. The growth of Gangdaok was the highest. However, although the growth of Kwangpyeongok, was lower thanthar of Gangdaok, its stem height to ear height ratio was lower than that of Gangdaok, thus, Kwangpyeongok may be more suitable for stable cultivation. Both growth and yield of Daanok were low, regardless of planting date, but yield and ear shape of Pyeongkangok and Dapyeongok were for fresh corn. Growth and yield of the 15 different corn hybrids varied depending on the planting date, However, the growth degree days (GDD) was the most important factor governing the maturity of corn. More than $1500^{\circ}C$ of GDD was sufficient to harvest mature corn hybrids in the central region of Korea. Besides yield and growth, other characteristics, such as sweetness and taste of the hybrids, should be investigated further the selection of the best corn hybrid.

• Journal of Embryo Transfer
• /
• v.21 no.3
• /
• pp.169-175
• /
• 2006

The objective of this study was carried out to examine the polar body extrusion of in vitro matured porcine follicular oocytes as a non-invasive marker of oocyte quality to know the developmental competence in advance. The porcine oocytes matured for 48 hours were examined the polar body extrusion and some parts were stained. The examined oocytes were matured for additional $16{\sim}18$ hours and activated with 7% ethanol and cultured in $5{\mu}g/ml$ cytochalasin B for 5 hours for diploid formation. The treated oocytes were washed and cultured for 7 days. The polar body extrusion and degeneration rates were varied with $9.9{\sim}52.4%$ and $21.4{\sim}61.8%$ by repetition. The polar body extruded oocytes were shown the polar body chromosome and metaphase II plate by staining. However the non-extruded oocytes were shown expanded nucleus with 39.1%, premature chromosome condensation with 19.6%, metaphase I plate with 10.9 %, metaphase II with 13%, condensed chromatin with 6.5%, and absent nuclear material with 8.7%. The oocytes that were not examined for the polar body extrusion were cleaved 45.0%, and developed to blastocyst stage with 11.3%. In examined oocytes for polar body extrusion,. the polar body extruded oocytes were cleaved 94.2% and developed with 42.5%. This result suggests that discarding of the degenerating oocytes and oocytes that not extruded polar body will be effective for experiments of culturing effect in porcine embryos and embryo biotechnology.

• Journal of Food Hygiene and Safety
• /
• v.27 no.3
• /
• pp.277-284
• /
• 2012

The objective of this study was to investigate and evaluate microbial contamination levels of leafy greens (perilla leaf and lettuce) and its distributing conditions at different seasons (Feb, May, Aug, and Nov of the year 2011) in order to provide insight into any potential health hazards associated with consumption of these commodities. Leafy greens were collected from a farm located in Geumsan, Chungnam and wholesale markets (WM) and traditional markets (TM) located in Suwon. At the same time, temperature and relative humidity fluctuations experienced by the leafy greens during distribution from the farm to the distribution center were measured by a data logger. The contamination levels of perilla leaf and lettuce were determined by analyzing total plate count. Coliform groups, Bacillus cereus, Escherichia coli, Escherichia coli O157:H7, Salmonella spp., Listeria monocytogenes and Staphylococcus aureus were determined. The contamination levels of total aerobic bacteria, coliform groups and B. cereus in both vegetables sampled during May and August found to be higher than those sampled during February and November. E. coli O157:H7, Salmonella spp., L. monocytogenes were not detected in the vegetables analyzed in this study. There were no significant trends between samples at WM and TM in the contamination levels. Relative humidity of vegetables distributed from the farm to the distribution center showed over 90% during distribution regardless of measured seasons. In the case of background microflora on leafy greens, the density was significantly increased at 20, 30 and $37^{\circ}C$ during storage of 24h. E. coli O157:H7 and B. cereus inoculated on the leaves also showed similar increases in the storage tests. The microbial contamination levels determined in this study may be used as the fundamental data for microbial risk assessment.

• Journal of Food Hygiene and Safety
• /
• v.27 no.3
• /
• pp.271-276
• /
• 2012

This study intented to standardize the method for total polysaccharide, which is a functional marker for aloe vera gel in Korea. We used four lyophilized raw materials and commercial aloe gel products, certified as Health Functional Food by Korea Food and Drug Administration, including powder, solution, jelly, tablet and capsule, to optimize the analytical condition of dialysis and phenol-sulfuric acid reaction in polysaccharide analysis. The optimal conditions for polysaccharide analysis included 1 L water for dialysis and change 3 times for 24hr against 25 mL prepared sample solution. Validation test showed lower than 5% of coefficient of variation(CV) in intra-, interday validation in lyophilized raw materials and 4 types of commercial products. In inter-person and inter-laboratory validation with 4 persons from 4 different laboratories, CV(%) were 5.50 and 6.64 respectively. The linearity of polysaccharide analysis was assessed using 5 serial concentration of lyophilized raw materials(0.1, 0.2, 0.3, 0.4, 0.5%(w/v)). The results showed $R^2{\geq}0.995$ of high linearity. In the commercial aloe vera gel products, the results of reproductivity showed lower than 7.08% and revealed that the standardized method from this study ensured high precision for polysaccharide analysis.

• Journal of Life Science
• /
• v.27 no.11
• /
• pp.1369-1375
• /
• 2017

The purpose of this study was to investigate the cellular characterization of phospholipase C-${\delta}1$ in olive flounders (Paralichthys olivaceus). In general, phospholipase C signaling pathways are distributed in nuclei at plasma membranes and in cytoplasms, although the pathways' nuclear localization mechanisms are unclear. P. olivaceus duplicates type-A PoPLC-${\delta}1$ (PoPLC-${\delta}1A$), which has a high similarity to the human isoform PLC-${\delta}$; type-B PoPLC-${\delta}1$ (PoPLC-${\delta}1B$ [Sf]), which has a low similarity to the human isoform PLC-${\delta}$ and the alternative splice variant PoPLC-${\delta}1B$ (Lf), which has a nuclear localization signal (NLS) and a nuclear export signal (NES) for nuclear imports and exports, respectively. This study confirmed the effects of the cellular localization and translocation of GFP-tagged PoPLC-${\delta}1A$, PoPLC-${\delta}1B$ (Sf) and PoPLC-${\delta}1B$ (Lf). It administered treatments of $Ca^{2+}$ ionophore ionomycin and endoplasmic reticulum (ER)-$Ca^{2+}$ pump inhibitor thapsigargin to hirame natural-embryo (HINAE) cells. A laser-scanning confocal microscope was used. GFP-tagged PoPLC-${\delta}1A$ was distributed to the cellular organelles, rather than to the cytoplasms and cytomembranes, when PoPLC-${\delta}1B$ (Lf) and PoPLC-${\delta}1B$ (Sf) were localized at the plasma membranes. The treatments of ionomycin and thapsigargin showed the accumulation of PoPLC-${\delta}1A$ in the nuclei when PoPLC-${\delta}1B$ (Lf) nucleocytoplasmic shuttling and PoPLC-${\delta}1B$ (Sf) nucleocytoplasmic shuttling were not observed. The results were the first evidence that PoPLC-${\delta}1A$, which contains functional, intact NES sequences, has a main role in nucleocytoplasmic shuttling and translocation in fish.

• Korean Journal of Food Science and Technology
• /
• v.34 no.2
• /
• pp.263-268
• /
• 2002

Bacillus polyfermenticus SCD, which is commonly called a 'Bisroot' strain, has been appropriately used for the treatment of long-term intestinal disorders, since the live strains, in the form of active endospores, can successfully reach the target intestine. Goal of this study was to develop an industrial medium for growth and sporulation of B. polyfermenticus SCD. From the results of effect of mixed carbon sources on growth and sporulation of B. polyfermenticus SCD, glucose 2% and starch 2% was particularly found to be the most effective for the maximum number of spore production, resulting in spore cells of $4.3{\times}10^9\;spores/mL$ with a sporulation yield of 91%. For the effect of nitrogen sources, the maximum spore cells of $5.7{\times}10^9\;spores/mL$ of B. polyfermenticus SCD with a sporulation yield of 97% was obtained when B. polyfermenticus SCD was cultivated in an optimum nitrogen source medium containing 5% soybean flour. A medium involving proper phosphate salt yielded the maximum number of a spore cells of $6.0{\times}10^9\;spores/mL$ with a sporulation yield of 95%. Finally, the efficacy of an industrial medium (KH5 medium) on growth and sporulation of B. polyfermenticus SCD was investigated in jar fermenter. The higher number of viable cells $(3.3{\times}10^{10}\;cells/mL)$ and spore cells $(3.0{\times}10^{10}\;spores/mL)$ were obtained in 5 L fermenter when compared with a 500 mL baffle flask cultivation. Thus, KH5 medium developed in this study shows promise as an industrial medium because of higher cells and sporulation yield.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.3
• /
• pp.312-319
• /
• 2009

Statement of problem: Delamination of veneering porcelain from underlying ceramic substructures has been reported for zirconia-ceramic restorations. Colored zirconia cores for esthetics have been reported that their bond strength with veneered porcelain is weaker compared to white zirconia cores. Purpose: This study aimed to investigate the shear bond strength by manufacturing the veneering porcelain on the colored zirconia core, using the layering technique and heat-pressing technique, and to evaluate the clinical stability by comparing the result of this with that of conventional metal ceramic system. Material and methods: A Metal ceramic (MC) system was tested as a control group. The tested systems were Katana zirconia with CZR (ZB) and Katana Zirconia with NobelRondo Press (ZP). Thirty specimens, 10 for each system and control, were fabricated. Specimen disks, 3 mm high and 12 mm diameter, were fabricated with the lost-wax technique (MC) and the CAD-CAM (ZB and ZP). MC and ZB specimens were prepared using opaque and dentin veneering ceramics, veneered, 3 mm high and 2.8 mm in diameter, over the cores. ZP specimens were prepared using heat pressing ingots, 3 mm high and 2.8mm in diameter. The shear bond strength test was performed in a Shear bond test machine. Load was applied at a cross-head speed of 0.50 mm/min until failure. Mean shear bond strengths (MPa) were analyzed with the One-way ANOVA. After the shear bond test, fracture surfaces were examined by SEM. Results: The mean shear bond strengths (SD) in MPa were MC control 29.14 (2.26); ZB 29.48 (2.30); and ZP 29.51 (2.32). The shear bond strengths of the tested systems were not significantly different (P > .05). All groups presented cohesive and adhesive failures, and showed predominance of cohesive failures in ceramic veneers. Conclusion: 1. The shear bond strengths of the tested groups were not significantly different from the control group (P >.05). 2. There was no significant different between the layering technique and the heat pressing technique in the veneering methods on the colored zirconia core. 3. All groups presented cohesive and adhesive failures, and showed predominance of cohesive failures in ceramic veneers.