• 한국농공학회지
• /
• 제41권3호
• /
• pp.41-50
• /
• 1999

Derivatio of reasonable design floods was attempted by comparative analysis of design floods derived by Generalized Extreme Value(GEV) distribution using methods of L-moments and LH-moments for the annual maximum series at ten watersheds along Han, Nagdong. Geum, Yeongsan and Seomjin river systems, LH-coefficient of variation, LH-skewness and Lh-kurtosis were calcualted by KH-moment ration respectively. Paramenters were estimated by the Method of LH-Moments, Design floods obtained by Method of LH-Moments using different methods for plotting positionsi n GEV distribution and design floods were compared with those obtained using the Method of L-Moments by the Relative Mean Errors(RME) and Relative Absolute Errors(RAE). The results was found that design floods derived by the method of L-Moments and LH-Moments using Cunnane plotting position formula in the GEV distribution are much closer to those of the observed data in comparison with those obtained by methods of L-moments and LH-moments using the other formula for plotting positions from the viewpoint of Relative Mean Errors and Relative Absolute Errors. In viewpoint of the fact that hydrqulic structures including dams and levees are genrally using design floods with the return period of two hundred years or so, design floods derived by LH-Moments are seemed to be more reasonable than those of L-Moments in the GEV distribution.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.479-485
• /
• 1999

This study was conducted to derived design floods by Generalized Extreme Value(GEV) distributiion for the annual maximum series at ten watersheds along Han, Nagdong, Geum , Yeongsan and Seomjin river systems. Adequency for the analysis of flood data used in this study was established by the test of Independence, Homogeneity , detection of Outliers. Coefficient of variation , skewness and kurtosis were calculated by the L-Moment, and LH-Moment ratio respectively. Parameters were estimated by the Method of L-Method of LH-Moment. Design floods obtained by Method of L-Moments and LH-Moments using different methods for plotting positions in GEV distributions and were compared with those obatined using the Method of L-Moments and LH-Moments by the Relative Mean Errors and Realtive Absoulte Errors. It was found that desgin floods derived by the method of L-Moments and LH-Moments using Cunnane plotting position foumula in the GEV distribution are much closer to those of the observed data in comparison with those obtained by methods of L-moments and LH-moments using the other formula for poltting postions from the viewpoint of Relative Mean Errors and Relative Absoulte Errors. In view of the fact that hydraulic structures indcluding dams and levees are generally usiong design floods with the return period of two hundred years or so, design floods derived by LH-Moments are seemed to be more reasonable than those of L-Moments in the GEV distribution.

• Communications for Statistical Applications and Methods
• /
• 제3권1호
• /
• pp.189-193
• /
• 1996

In 1992. Boullion obtained the method of the calculus of the moments of discrete probability distributions using differential operator, and he published the method of calculus of the moments. The purpose of this paper is to introduce an idea that this method can be applied to calculate the moments of continuous probability distributions.

• 대한기계학회논문집A
• /
• 제30권8호
• /
• pp.985-992
• /
• 2006

Many methods for reliability analysis have been studied and one of them, a moment method, has the advantage that it doesn't require sensitivities of performance functions. The moment method for reliability analysis requires the first four moments of a performance function and then Pearson system is used for the probability of failure where the accuracy of the probability of failure greatly depends on that of the first four moments. But it is generally impossible to assess them analytically for multidimensional functions, and numerical integration is mainly used to estimate the moment. However, numerical integration requires many function evaluations and in case of involving finite element analyses, the calculation of the first fo 따 moments is very time-consuming. To solve the problem, this research proposes a new method of approximating the first four moments based on kriging metamodel. The proposed method substitutes the kriging metamodel for the performance function and can also evaluate the accuracy of the calculated moments adjusting the approximation range. Numerical examples show the proposed method can approximate the moments accurately with the less function evaluations and evaluate the accuracy of the calculated moments.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.678-683
• /
• 2008

Moment-based reliability analysis is the method to calculate reliability using Pearson System with first-four raw moments obtained from simulation model. But it is too expensive to calculate first four moments from complicate simulation model. To overcome this drawback the MD(multiplicative decomposition) method which approximates simulation model to kriging metamodel and calculates first four raw moments explicitly with multiplicative decomposition techniques. In general, kriging metamodel is an interpolation model that is decomposed of global model and local model. The global model, in general, can be used as the constant global model, the 1st order global model, or the 2nd order global model. In this paper, the influences of global models on the accuracy and robustness of raw moments are examined and compared. Finally, we suggest the best global model which can provide exact and robust raw moments using MD method.

• 한국수자원학회논문집
• /
• 제32권2호
• /
• pp.99-110
• /
• 1999

모멘트법은 Lagrangian 벙법으로서 격자요소 내에서의 농도의 공간분포에 대한 0차, 1차, 2차 모멘트를 고려한고 각 모멘트의 보존성을 유지하면서 농도분포의 이송을 계산하는 방법이다. 따라 각 격자요소에서의 0차 모멘트, 즉 평균농도 뿐만 아니라 1차 및 2차 모멘트 값의 합리적인 초기 설정이 요구된다. 본 연구에서는 각 모멘트들의 초기값 설정방법을 검토하고, 기존 모멘트법의 Couuant 수에 대한 제약조건을 극복하기 위하여 모멘트법을 개선하였다. 모멘트법에 의한 모의 결과를 유용한 Eulerian 및 Lagrangian 기법에 의한 모의 결과와 비교 검토하여 모한 해석결과를 발생시키는 기법이며, 본 연구에서 제시한 Courant 수 제약조건의 극복에 관한 연구는 성공적으로 이루어진 것으로 나타났다. 한편, 모멘트법은 농도가 전체 계산영역의 일부에 분포하는 2차원 영역에서의 이송 모의시 계산시간에 있어서 매우 효율적인 것으로 나타났다.

• 한국농공학회지
• /
• 제40권4호
• /
• pp.45-57
• /
• 1998

This study was conducted to derive optimal design floods by Generalized Extreme Value (GEV) distribution for the annual maximum series at ten watersheds along Han, Nagdong, Geum, Yeongsan and Seomjin river systems. Adequacy for the analysis of flood data used in this study was established by the tests of Independence, Homogeneity, detection of Outliers. L-coefficient of variation, L-skewness and L-kurtosis were calculated by L-moment ratio respectively. Parameters were estimated by the Methods of Moments and L-Moments. Design floods obtained by Methods of Moments and L-Moments using different methods for plotting positions in GEV distribution were compared by the Relative Mean Errors(RME) and Relative Absolute Errors(RAE). The results were analyzed and summarized as follows. 1. Adequacy for the analysis of flood data was acknowledged by the tests of Independence, Homogeneity and detection of Outliers. 2. GEV distribution used in this study was found to be more suitable one than Pearson type 3 distribution by the goodness of fit test using Kolmogorov-Smirnov test and L-Moment ratios diagram in the applied watersheds. 3. Parameters for GEV distribution were estimated using Methods of Moments and L-Moments. 4. Design floods were calculated by Methods of Moments and L-Moments in GEV distribution. 5. It was found that design floods derived by the method of L-Moments using Weibull plotting position formula in GEV distribution are much closer to those of the observed data in comparison with those obtained by method of moments using different formulas for plotting positions from the viewpoint of Relative Mean Errors and Relative Absolute Errors.

• Bulletin of the Korean Chemical Society
• /
• 제2권3호
• /
• pp.79-82
• /
• 1981

A calculation method of the dipole moments for square planar and tetrahedral complexes by the valence bond method has been developed and an example calculation was carried out choosing the square planar and tetrahedral $[M(Ⅱ)N_2Se_2]$ type complexes. The calculated values of the dipole moments by the valence bond method are higher than those of the approximate orbital method. We found that we may predict the geometric structure of the transition metal complexes comparing the calculated values of the dipole moments with the experimental values. A new method for definition of C' parameter has also developed on the basis of extended Huckel theory.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 제14회 신호처리 합동 학술대회 논문집
• /
• pp.183-186
• /
• 2001

In this paper, we first propose new texture features, BVLC (block variation of local correlation coefficients) moments, for content-based image retrieval (CBIR) and then present an image retrieval method based on the fusion of BDIP and BVLC moments. BDIP uses the local probabilities in image blocks to extract valley and edges well. BVLC uses the variations of local correlation coefficients in images blocks to measure texture smoothness well. In order not to be affected with the movement, rotation, and size of an object, the first and second moments of BDIP and BVLC are used for CBIR. Corel DB and Vistex DB are used to evaluate the performance of the proposed retrieval method. Experimental results show that the presented retrieval method yields average 12% better performance than the method using only BDIP or BVLC moments and average 13% better performance than the method using wavelet moments.

• Geomechanics and Engineering
• /
• 제18권1호
• /
• pp.41-48
• /
• 2019

Bending moments in the raft of a pile raft system is affected by pile-pile interaction and pile-raft interaction, amongst other factors. Three-Dimensional finite element program has to be used to evaluate these bending moments. Winkler type analysis is easy to use but it however ignores these interactions. This paper proposes a very simplified and novel method for finding bending moments in raft of a piled raft based on Winkler type where raft is supported on bed of springs considering pile-pile and pile-raft interaction entitled as "Winkler model for piled raft (WMPR)" The pile and raft spring stiffness are based on load share between pile and raft and average pile raft settlement proposed by Randolph (1994). To verify the results of WMPR, raft bending moments are compared with those obtained from PLAXIS 3D software. A total of sixty analysis have Performed varying different parameters. It is found that raft bending moments obtained from WMPR closely match with bending moments obtained from PLAXIS 3D. A comparison of bending moments ignoring any interaction in Winkler model is also made with PLAXIS-3D, which results in large difference of bending moments. Finally, bending moment results from eight different methods are compared with WMPR for a case study. The WMPR, though, a simple method yielded comparable raft bending moments with the most accurate analysis.