• Bulletin of the Korean Chemical Society
• /
• 제18권9호
• /
• pp.1002-1006
• /
• 1997

1H NMR spectra of D2O solutions containing 2,2-dimethylaziridine (1) or 2-methylaziridine (2) and [SiW11COⅡO39]6- (SiW11Co) or [SiW11NiⅡO39]6- (SiW11Ni) exhibit separate signals for the free ligand and the complex, indicating that the ligand exchange is slow on the NMR time scale. Identified are two linkage isomers with the methyl group of 2 at trans or cis position with respect to the metal. The isotropic shifts of 1 and 2 coordinated to SiW11Ni originate mainly from the contact shifts, and they agree reasonably with the relative values reported for similar ligands coordinated to bis(2,4-pentanedionato)nickel(Ⅱ). The isotropic shifts for the SiW11Co complexes were separated into contact and pseudocontact contributions. The pseudocontact shifts show that (χ∥-χ⊥) is positive, while that for the SiW11Co complexes of pyridine derivatives is negative. This result indicates that the ordering of dxy and dxz, dyz orbitals in SiW11Co complexes can be reversed by ligands.

• 분석과학
• /
• 제11권4호
• /
• pp.316-320
• /
• 1998

An image analysis was used for the interpretation of microstructures of ferrous metal artifacts. For the purposes, various microstructural features such as average grain size, phase area, shape factor, and composition of the inclusions, were parameterized for the information about manufacturing techniques such as casting, heating and tempering. The carbon content was determined through the evaluation of the amount of pearlite phase. As the amount of pearlite phase increased the shape factor also increased. Grain size was relatively smaller in trans-section than in cross-section. The manufacturing direction was trans-sectional because the orientation of inclusions was elongated lengthwise. All inclusions was of silicate groups and the manufacturing temperature was estimated up to $1450^{\circ}C$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 반도체 재료 센서 박막재료 전자세라믹스
• /
• pp.26-29
• /
• 2004

High density plasma fluorinated silicate glass (HDP FSG) is used as a gap fill film for metal-to-metal space because of many advantages. However, FSG films can cause critical problems such as bonding issue of top metal at package, metal contamination, metal peel-off, and so on. It is known that these problems are caused by fluorine penetration out of FSG film. To prevent it, FSG capping layers such like SRO (Silicon Rich Oxide) are needed. In this study, their characteristics and a capability to block fluorine penetration for various FSG capping layers are investigated. Normal stress and High stress due to denser film. While heat treatment to PETEOS caused lower blocking against fluorine penetration, it had insignificant effect on SiN. Compared with other layers, SRO using ARC chamber and SiN were shown a better performance to block fluorine penetration.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.300-303
• /
• 2004

To fill the gap of films for metal-to-metal space High density plasma fluorinated silicate glass (HDP FSG) is used due to various advantages. However, FSG films can have critical drawbacks such as bonding issue of top metal at package, metal contamination, metal peel-off, and so on. These problems are generally caused by fluorine penetration out of FSG film. Hence, FSG capping layers such like SRO(Silicon Rich Oxide) are required to prevent flourine penetration. In this study, their characteristics and a capability to block fluorine penetration for various FSG capping layers are investigated through FTIR analysis. FTIR graphs of both SRO using ARC chamber and SiN show that clear Si-H bonds at $2175{\sim}2300cm^{-1}$. Thus, Si-H bond at $2175{\sim}2300cm^{-1}$ of FSG capping layers lays a key role to block fluorine penetration as well as dangling bond.

• 자원리싸이클링
• /
• 제31권4호
• /
• pp.49-55
• /
• 2022

본 연구에서는 인덕션 탑플레이트(induction top plate) 소재로 사용된 후 폐기되는 사용 후 Li₂O-Al₂O₃-SiO₂계 결정화 유리를 활용하여 중금속 용액 내 존재하는 중금속(Pb, Cd, Cr⁶⁺, Hg) 이온들의 제거 실험을 진행하였다. 중금속 흡착제로 사용된 흡착제의 양, 흡착 반응 시간, 초기 중금속 원소의 농도, 초기 용액의 pH 등의 반응 조건에 따른 중금속 제거 효율의 변화를 조사하였다. 사용 후 LAS 첨가량이 증가할수록 중금속 제거 효율이 상승하였다. 흡착 반응 시간은 흡착 특성에 큰 영향을 미치는 것으로 확인되었으며, 모든 중금속 원소들의 제거 효율이 상승하였다. 특히 반응 시간에 따라서 Cd의 경우 흡착제거 효율이 크게 개선되었다. 초기 중금속 용액 농도는 중금속 제거 효율에 영향을 미치지 않았다. 중금속 용액의 pH는 중금속 제거 효율에 영향을 미쳤는데, Cd의 경우 pH증가에 따라 중금속 제거 효율이 증가하였으며, Pb, Cr⁶⁺는 감소하였다. Hg는 pH가 흡착 특성에 큰 영향을 미치지 않았다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.781-786
• /
• 2002

We develop the performance improving agent of penetration reinforcing applied on concrete by which main components use compounds of metal alkoxide and silicate(Ti). Also, we investigate on the type and amount of organic solvent which need the hydrolysis and water condensation reaction of Ti. The penetration reinforcing agent developed this study can penetrate deeper than 50mm without relation to concrete strength. Also the performance improving agent composed of the combination of Ti and organic solvent A, improve performance in keeping out or removement of deterioration material. waterproof and strength.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.521-526
• /
• 2002

In this paper, we described about the characteristic evaluation of environment-friendly ceramic paint with calcium-silicate mineral as a main binder. Particularly, we performed discharge of the environmental poisoning materials(e.g. VOCs, heavy metal, etc.), and properties of paint slurry and coating film of the ceramic paint. In the comparison of the ceramic paint with natural paint and mineral paint which were known as our environment-friendly paints, ceramic paint had good characteristics in the environmental safety and properies of wet slurry and dried coating film.

• 한국광물학회지
• /
• 제28권2호
• /
• pp.147-163
• /
• 2015

석탄화력발전 부산물인 석탄회의 희유 금속 재활용을 위한 기반 연구로서 9개 발전소의 석탄회를 대상으로 화학적 및 광물학적 특성을 분석하였다. 석탄회의 희유원소 화학조성은 전반적으로 셰일의 평균 조성과 부합하며, 국외 석탄회와 차이도 거의 없다. 그러나 국산 무연탄 비산재와 수입 유연탄 비산재는 무기원소 조성에서 약간의 차이가 있으며, 무연탄 비산재의 미연 탄소 함유량이 매우 높다. 바닥재와 비교하여 친황원소들이 비산재에 부화되는 경향이 있다. 규산염 유리가 주요 고상이며, 석영, 일라이트(백운모), 멀라이트, 자철석, 생석회, 경석고가 광물로 함유되어 있다. 규산염 유리는 Al과 Si가 주성분이고, Ca, Fe, K, Mg가 다양한 비율로 함유되어 있다. 규산염 유리는 다공성 구형 또는 비정형 부석질 입자들이며, 흔히 잔존 광물이나 산화철구, 또는 다른 유리입자들과 융접되어 있다. 산화철구 입자는 급속 성장한 산화철 미세 입자와 유리 기질로 구성되어 있다. 석탄회로부터 유가 금속 재활용을 위해서는 이상의 화학조성, 미세조직, 광물학적 특성들이 고려되어야 한다.

• Ocean and Polar Research
• /
• 제25권1호
• /
• pp.119-128
• /
• 2003

Although phoscorites and carbonatites form only a minor proportion of the earth's crustal rocks, these unusual rocks and their intimate relation are of both academic and economic importance. Rare metal (Nb, Zr, Ta) and REEs mineralizations are in close relation with the differentiation of these phoscorite-carbonatite complexes (PCCs). Recent integrated petrological and geochemical data on PCCs in the Kola Alkaline Province, Arctic, indicate that phoscorites and associated carbonatites are differentiated from common 'carbonated silicate patental magma'. Various hypotheses for the genesis of phoscorite-carbonatite complexes have been proposed during the last half-century. A simple magmatic fractionation scheme can not explain the chemical and mineralogical characteristics of phoscorite and conjugate carbonatite. Instead, the hypotheses involving liquid immiscibility and coeval accumulation processes are favored to explain the mineralogical and geochemical characteristics of phoscorite and carbonatite association.

• The Korean Journal of Ceramics
• /
• 제5권4호
• /
• pp.363-367
• /
• 1999

New glass ceramics were investigated for the application as substrates to be used in hard disk devices. The glass system to precipitate lithium di-silicate was studied so as to optimize the composition to realize very high surface flatness. The addition of small amount of several metal oxides with high valences had very drastic effects on the microstructure, because they played a role of crystallization agents, and consequently it determined surface flatness even after the polishing process. The possible mechanism changes of crystal growth due to the addition of metal oxides were discussed in relation to the final micro-texture development. The glass ceramics with very high surface flatness(Ra=7.1 $\AA$) was obtained by the addition of the mixture of $P-2O_5 \;and \;MoO_3$ as crystallization agents.