• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.334-335
• /
• 2005

Ternary tellurite glassy systems ($Li_2O-V_2O_5-P_2O_5$) have been synthesised using Vanadium oxide as a network former and Lithium oxide as network modifier. The addition of a metal? oxide makes them electric or mixed electric-ionic conductors, which are of potential interest as cathode' materials for solid-state batteries. This glass-ceramics crystallized from the $Li_2O-V_2O_5-P_2O_5$ system are particularly interesting, because they exhibit high conductivity (up to $5.95\times10^{-4}$ S/cm) at room temperature. the glass samples were prepared by quenching the melt on the copper plate and the glass-ceramics were heat-treated at crystallizing temperature determined from differential thermal analysis (DTA). The electric D.C conductivity result have been analyzed in terms of a small polaron-hopping model.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.348-349
• /
• 2006

$LiNi_{1/3}Mn_{1/3}Co_{1/3}O_2$ cathode material was synthesized by a mixed hydroxide methode. The surface of the $LiNi_{1/3}Mn_{1/3}Co_{1/3}O_2$ was coated with a carbon by using a sol-gel method to improve further its electrochemical properties. Electrochemical studies were performed by assembling 2032 coin cells with lithium metal as an anode. OSC (differential scanning calorimetry) data showed that exothermic reactions of charged to 4.3V vs. Li was suppressed in the carbon-coated materials. The carbon-coated $LiNi_{1/3}Mn_{1/3}Co_{1/3}O_2$ showed the improved rate capability and thermal stability.

• 한국전기전자재료학회논문지
• /
• 제24권10호
• /
• pp.850-854
• /
• 2011

Nano-fibers of the $Li[Ni_{1/3}Co_{1/3}Mn_{1/3}]O_2$ electrode were synthesized from a metal oxide precursor using the electrospun method. The XRD patterns of all prepared powders showed a hexagonal ${\alpha}$ - $NaFeO_2$ structure (space group: R-3 m, 166). Scanning electron microscopy showed that all the synthesized samples were comprised of nanofibers with a size of 100~800 nm. Among the samples tested, the calcined $Li[Ni_{1/3}Co_{1/3}Mn_{1/3}]O_2$ nanowires in oxygen heating atmosphere showed a high charge and discharge capacity of 239.22 and 172.81 $mAhg^{-1}$ at the $1^{st}$ cycle, respectively. In addition, the charge transfer resistance was also improved significantly compared to the other samples.

• 한국재료학회지
• /
• 제27권12호
• /
• pp.672-678
• /
• 2017

In the production of zirconium cladding tube, a pickling acid solution is used to remove surface contaminants, which generates tons of pickling acid waste. The waste pickling solution is a valuable resource of Hf-free Zr. Many studies have investigated separating the Hf-free Zr source from the waste pickling acid. The results showed that $Ba_2ZrF_8$ precipitates prepared from the waste pickling acid were useful as an electrolyte for the electrorefining of Zr in molten salt. In the present work, electrorefining was performed in a $Ba_2ZrF_8-LiF$ binary electrolyte to recover Zr from a Hf-free CuZr ingot anode prepared by electroreduction. Before electrorefining, two pretreatments are performed. First, electrolyte melting was carried out to determine the eutectic temperature, and second, the electrolyte was treated to eliminate impurities, mainly hydride. After electrorefining, the cathode deposits were analyzed by $O_2$ gas analyzer and SEM-EDX to explore the possibility of recovering nuclear-grade Zr metal. Moreover, the anode was analyzed by SEM-EDX to determine the Zr dissolution depth.

• Journal of Ceramic Processing Research
• /
• 제19권6호
• /
• pp.445-449
• /
• 2018

Chromium plating is a common surface treatment technique extensively applied in industry due its excellent properties which include substantial hardness, abrasion resistance, corrosion resistance, surface color, and luster. In this study, the effect of $MoS_2$ particles of the composite coating was investigated. To improve the lubrication of mold, $Cr-P-C/MoS_2$ composite plating was studied by varying the $MoS_2$ content. The current efficiency of the composite plating incorporated $MoS_2$ particles was increased at $MoS_2$ contents of 0.5 and 1.0 g/l due to the incorporation of fine particles. On the other hand, when the content of $MoS_2$ is 1.0 g/l or more, the current efficiency is lowered due to an increase in impact on the cathode surface. In order to evaluate the mechanical properties of Scratch test were conducted. Scratch test confirmed the lubricity and abrasion resistance characteristics revealed that the composite plating with added $MoS_2$ had relatively low surface roughness and uniform surface modification to improve its properties.

• Corrosion Science and Technology
• /
• 제20권6호
• /
• pp.347-360
• /
• 2021

Currently, the demand for eco-friendly energy sources is high, which has prompted research on polymer electrolyte membrane fuel cells. Both aluminum alloys and nickel alloys, which are commonly considered as materials of bipolar plates in fuel cells, oxide layers formed on the metal surface have excellent corrosion resistance. In this research, the electrochemical characteristics of 6061-T6 aluminum alloy and Inconel 600 were investigated with chloride concentrations in an acid environment that simulated the cathode condition of the PEMFC. After potentiodynamic polarization experiments, Tafel analysis and surface analysis were performed. Inconel 600 presented remarkably good corrosion resistance under all test conditions. The corrosion current density of 6061-T6 aluminum alloy was significantly higher than that of Inconel 600 under all test conditions. Also, 6061-T6 aluminum alloy and Inconel 600 presented uniform corrosion and intergranular corrosion, respectively. The Ni, Cr, and Fe, which are the main chemical compositions of Inconel 600, are higher than Al in the electromotive force series. And a double oxide film of NiO-Cr₂O₃, which is more stable than Al₂O₃, is formed. Thus, the corrosion resistance of Inconel 600 is better.

• 반도체디스플레이기술학회지
• /
• 제21권3호
• /
• pp.119-124
• /
• 2022

Top emission organic light-emitting diode (TEOLED) is commonly used because of high efficiency and good color purity than bottom - emission organic light-emitting device (BEOLED). Unlike BEOLED, TEOLED contain semitransparent metal cathode and capping layer. Because there are many characteristics to consider just simple thickness change, optimizing organic thickness of TEOLED for microcavity is difficult. So, in this study, we optimized Device capping layer at unoptimized micro-cavity structure TEOLED device. And we compare only capping layer with unoptimized microcavity structure can overcome optimized micro-cavity structure device. We used previous our optimized micro-cavity structure to compare each other. As a result, it has been found that the efficiency can be obtained almost the same or higher only capping layer, which is stacked on top of the device and controls only the thickness and refractive index, without complicated structural calculations. This means that higher efficiencies can be obtained more easily in laboratories with limited organic materials or when optimizing new structures etc.

• Composites Research
• /
• 제37권4호
• /
• pp.286-290
• /
• 2024

The rapid increase in the demand for energy has put huge pressure on fossil fuels. The continuous overutilization of these existing non-renewable energy sources has been causing severe environmental concerns. In these regards, electrochemical water splitting has gained huge attention for producing green hydrogen, a superior energy source with high gravimetric energy density (120 MJ/kg), as compared with conventional options. Electrochemical water splitting is a viable option for generating green hydrogen. However, the various limitations of state-of the art Pt/C and RuO₂- based electrocatalysts has motivated the scientific community to develop novel cathode (hydrogen evolution reaction (HER)) and anode (oxygen evolution reaction (OER)) electrocatalysts. In our present study, we have achieved a new milestone by fabricating the NiMo-based transition metal LDHs coupled V₂C MXene support based heterocatalyst. The synergistic impact of NiMo LDHs (corrosion resistance, favorable intrinsic catalytic properties, etc.) and V₂C (high electrical conductivity, pseudocapacitive behavior, etc.) has resulted in the HER and OER at smaller overpotential of 135 and 370 mV at the current density of 10 and 30 mA cm-2 in an alkaline (1.0 M KOH) environment.

• 한국광물학회지
• /
• 제16권3호
• /
• pp.223-232
• /
• 2003

리튬2차전지용 양극소재 개발을 위해 Li[L $i_{x}$M $n_{1-x-y}$C $r_{y}$ ] $O_2$를 공침법(co-p.ecipitation method)을 적용하여 각각 $650^{\circ}C$(CR650)와 8$50^{\circ}C$(CR850)에서 합성하였다. 리트벨트 구조분석 결과 계산의 정밀도를 나타내는 R 지수값을 보면 $R_{exp}$에 대한 $R_{wp}$값( $R_{wp}$/ $R_{exp}$)은 CR650과 CR850의 각각에 대해 19.2%/10.1%과 15.9%/9.76%를 보여주며, $R_{b}$값은 각각 10.9%와 8.54%, 그리고 S(GofF)값은 각각 1.9와 1.6으로 계산되었다. 합성된 양극소재는 공간군 R3m의 층상구조(LiMn $O_2$)가 존재하였으며, 전이금속 층 내의 Mn이 Li로 치환되면서(Li[L $i_{1}$3/M $n_{2}$3/] $O_2$) 단사구조(C2/c)의 거대격자(Superlattice) 구조현상도 관찰되었다. 계산된 단위포는 공간군 R3m, CR650이 a=2.8520(2)$\AA$, c=14.248(2)$\AA$, V=100.40(1)$\AA^3$이며, CR850은 a=2.8504(1)$\AA$, c=14.2371(7)$\AA$, V=100.179(8)$\AA^3$으로 각각 계산되었다. 또한 최종 결정된 화학식은 CR650은 Li[L $i_{0.35}$M $n_{0.56}$C $r_{0.09}$] $O_2$, CR850은 Li[L $i_{0.27}$M $n_{0.61}$C $r_{0.13}$] $O_2$으로 각각 구해졌다.다...다..구해졌다.다...다..

• 전기화학회지
• /
• 제20권4호
• /
• pp.67-74
• /
• 2017

층상구조의 Ni-rich NCM계 양극활물질 $Li[Ni_xCo_{(1-x)/2}Mn_{(1-x)/2}]O_2$ ($x{\geq}0.6$)은 $LiCoO_2$ 대비 높은 에너지밀도와 가격 경쟁력의 장점을 가진다. Ni 함량에 비례하여 가역 방전용량이 증가하는 장점이 있는 반면, 합성 중에 발생하는 양이온 혼합으로 인해 안정적인 전기화학성능을 구현하기 어려운 문제가 있다. 본 연구에서는 합성 분위기, 리튬 원료물질, 합성 시간, 합성 온도, Li/M (M=transition metal) 비율 등의 다양한 합성조건을 변수로 하여 Ni 함량 증가에 따라 최적의 층상구조 Ni-rich NCM을 각각 합성하고 이에 대한 전기화학성능을 보고하였다. $Li[Ni_{0.6}Co_{0.2}Mn_{0.2}]O_2$ (NCM6)을 기준으로 Ni 함량이 증가한 $Li[Ni_{0.7}Co_{0.15}Mn_{0.15}]O_2$ (NCM7)와 $Li[Ni_{0.8}Co_{0.1}Mn_{0.1}]O_2$ (NCM8)의 합성시 전이금속 중 Ni의 비율이 증가함에 따라 양이온 혼합이 증가하는 것이 관찰되었고, 이는 전기화학 성능에 부정적인 영향을 끼치는 것으로 확인되었다. Ni 비율별 NCM에 대한 연구결과 비율 내확인한 최적의 조건에서 NCM6은 $180mAh{\cdot}g^{-1}$, 96.2% (50회), NCM7은 $187mAh{\cdot}g^{-1}$, 94.7% (50회), NCM8은 $201mAh{\cdot}g^{-1}$, 92.7% (50회)의 초기 방전용량 및 수명평가 후 용량유지율 값을 각각 구현하였다.