• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.331-334
• /
• 2003

In the finite element simulation of hot forging processes using hexahedron, remeshing of a flash is very difficult. The mesh compression method is a remeshing technique to construct an effective hexahedral mesh. However, because mesh is distorted during the compression procedure or the mesh compression method, mesh smoothing is necessary to improve the mesh Qualify. in this study, several geometric mesh smoothing techniques and a matrix norm optimization technique are applied and compared which is more adaptive to the mesh compression method.

• International Journal of Contents
• /
• 제5권4호
• /
• pp.1-6
• /
• 2009

In this paper, we propose a mesh smoothing method for mesh models with noise. The proposed method enables not only the removal of noise from the vertexes but the preservation and smoothing of shape recognized as edges and comers. The magnitude ratio of 2D area and 3D volume in mesh data is adopted for the smoothing of noise. Comparing with previous smoothing methods, this method does not need many iteration of the smoothing process and could preserve the shape of original model. Experimental results demonstrate improved performance of the proposed approach in 3D mesh smoothing.

• 소성∙가공
• /
• 제12권4호
• /
• pp.340-347
• /
• 2003

In the rigid-plastic finite element simulation of hot forging processes using hexahedral mesh, remeshing of a flash is important for design and control of the process to obtain desirable defect-free products. The mesh compression method is a remeshing technique which enables the construction of an effective hexahedral mesh in the flash. However, because the mesh is distorted during the compression procedure of the mesh compression method, when it is used in resuming the analysis, it causes discretization error and decreases the conversance rate. Therefore, mesh smoothing is necessary to improve the mesh quality. In this study, several geometric mesh smoothing techniques and optimization techniques are introduced and modified to improve mesh quality. Then, the most adaptive technique is recommended for the mesh compression method.

• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2397-2405
• /
• 2000

The remeshing is a method to replace a distorted mesh by a new mesh without interrupting the finite element calculation. The remeshing procedure in this paper refers to the rezoning, for which a sm oothing process is developed to alleviate the distortions of mesh. In the paper, an automatic finite element rezoning system with tetrahedral elements for large deformation analysis has been developed. Our smoothing process is composed of two steps, a surface smoothing and a volume smoothing. In the surface smoothing, checking the dihedral angle and projection on surface patch reduced the change of shape and nodes penetrating die. The constrained Laplacian smoothing has been employed for the volume smoothing process. The state variables are mapped from old mesh to new mesh by using volume coordinates within a tetrahedral element. All these procedures have been linked to the NIKE3D program As illustrated in the examples the overall strategy ensures a robust and efficient rezoning scheme for finite element simulation of metal-forming processes.

• International Journal of CAD/CAM
• /
• 제6권1호
• /
• pp.89-97
• /
• 2006

This paper presents a novel approach for non-iterative surface smoothing with feature preservation on arbitrary meshes. Laplacian operator is performed in a global way over the mesh. The surface smoothing is formulated as a quadratic optimization problem, which is easily solved by a sparse linear system. The cost function to be optimized penalizes deviations from the global Laplacian operator while maintaining the overall shape of the original mesh. The features of the original mesh can be preserved by adding feature constraints and barycenter constraints in the system. Our approach is simple and fast, and does not cause surface shrinkage and distortion. Many experimental results are presented to show the applicability and flexibility of the approach.

• 전자공학회논문지
• /
• 제53권6호
• /
• pp.80-87
• /
• 2016

본 논문에서는 그래프 컬러링과 OpenMP를 사용한 병렬 메쉬 스무딩 알고리즘을 제안하고 공유메모리 기반의 슈퍼컴퓨터를 이용하여 제안하는 병렬 메쉬 스무딩 알고리즘의 성능 분석을 수행하였다. 제안하는 병렬 메쉬 스무딩 알고리즘은 그래프 컬러링 방법을 통해 전체 메쉬를 여러 개의 독립적인 집합 (색깔)으로 나눈 후 각각의 독립적인 집합에 대하여 OpenMP 라이브러리를 사용하여 순차적으로 병렬 메쉬 스무딩을 수행하는 방법이다. 실험을 통하여 여러 가지 그래프 컬러링 방법과 색깔 순서 재배열 방법이 병렬 메쉬 스무딩의 효율성에 미치는 영향에 대해서 알아보았다. 또한, OpenMP의 루프 스케줄링 방법이 병렬 메쉬 스무딩의 효율성에 끼치는 영향에 대해서 알아보았다.

• 전자공학회논문지
• /
• 제51권3호
• /
• pp.82-88
• /
• 2014

우리는 고성능 컴퓨팅 (high performance computing) 시스템에서 메쉬 재배열이 라플라시안 스무딩에 대해서 어떠한 효과가 있는지 연구한다. 구체적으로, 우리는 nonuniform memory access (NUMA) 구조의 고성능 컴퓨팅 시스템에서 Reverse-Cuthill Mckee 알고리즘을 사용하여 메쉬를 재배열하고 메쉬질을 높이기 위하여 라플라시안 스무딩을 사용한다. 먼저 하나의 코어를 사용하여 메쉬 재배열의 라플라시안 스무딩에 대한 속도 향상을 조사한 후에 NUMA구조의 멀티코어 시스템에서 OpenMP를 이용하여 병렬화할 경우 메쉬 재배열의 라플라시안 스무딩에 대한 속도 향상에 대하여 조사한다.

• 한국정밀공학회지
• /
• 제17권3호
• /
• pp.136-148
• /
• 2000

In this work, a general method for the mathematical description of three-dimensional trimmed surface is proposed by introducing the base parametric surface and boundary curves. Since mesh density distribution for the analysis may vary by cases, a grid-based mesh generation algorithm using quadtree is proposed in the present work. For the assurance of connectivity of generated meshes among surfaces, a method for the pre-cleaning of boundary curves has been developed to be used in the automatic generation of the finite elements. In addition, mesh-smoothing algorithm is suggested which can be used in the general trimmed surface. In this algorithm nodes are moved on the original surface by the normal projection in each iterative smoothing procedure.

• 소성∙가공
• /
• 제13권4호
• /
• pp.334-341
• /
• 2004

In this study, a remeshing algorithm adapted to the mesh density map using the Delaunay mesh generation method is developed. In the finite element simulation of forging process, the numerical error increases as the process goes on because of discrete property of the finite elements and distortion of elements. Especially, in the region where stresses and strains are concentrated, the numerical error will be highly increased. However, it is not desirable to use a uniformly fine mesh in the whole domain. Therefore, it is necessary to reduce the analysis error by constructing locally refined mesh at the region where the error is concentrated such as at the die corner. In this paper, the point insertion algorithm is used and the mesh size is controlled by using a mesh density map constructed with a posteriori error estimation. An optimized smoothing technique is adopted to have smooth distribution of the mesh and improve the mesh element quality.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.159-162
• /
• 2003

The remeshing algorithm using the constrained Delaunay method adapted to the mesh density map is developed. In the finite element simulation of forging process, the numerical error increases as the process goes on. However, it is not desirable to use a uniformly fine mesh in the whole domain. Therefore, it is necessary to reduce the analysis error by constructing locally fine mesh at the region where the error is concentrated such as die corner. In this paper, the point insertion algorithm is used and mesh size is controlled by using a mesh density map constructed with a posteriori error estimation. And an optimized smoothing technique is adapted to have smooth distribution and improve the quality of the mesh.