• Journal of the Korean Society of Radiology
• /
• v.11 no.4
• /
• pp.273-278
• /
• 2017

Among 45 patients of herniation of intervertebral disc with $L_4$ to $L_5$ herniation, who underwent infrared thermography, the number of female was larger than male and the age of 50s was highest. From the results measured from the distribution table, we have confirmed that there was no significant difference depending on sex and age (p> 0.05). The region of the highest ROI temperature for patients with $L_4-L_5$ intervertebral disc prolapse was the back of the posterior right tibia, and followed by the back of the left shin bone-below the front right knee-below the front left knee. There was a significant difference depending on the measured site. The average ROI temperature for patients was $30.30{\pm}0.50$ whereas that for normal persons was $31.20{\pm}0.58$, yielding the temperature difference of $0.66{\pm}0.59$ between the two groups. The ROI of patients was lower than $31.20{\pm}0.58$ (p <0.05) because the significance of the sample, which has been obtained from the results of a sample t-test, was less than 0.05 (p <0.05). From further researches, it may necessary to develope the methodology for correcting data regarding thermal environment and, in addition, to develope a new thermal index based on it. Therefore, we can confirm that pre-treatment for infrared thermography is very important in order to minimize the procedure for correcting data. It is required that radiologists who inspect disc herniations should carefully observe and consider the patients during their measurements.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.17 no.1
• /
• pp.3-6
• /
• 2013

Purpose: The treatment of thyroid cancer patients was continuously increased. According to the increment of thyroid cancer patients, the establishment of iodine therapy site was also increased in each hospital. This treatment involves the administration of radioactive iodine, which will be given in the form of a capsule. Therefore, protections and managements for radioactive source pollution and radiation exposure should be necessary for radiation safety. Among the many problems, the problem of disposing the radioactive wastes was occurred. In this study, The date for self-disposal for radioactive wastes, which were contaminated in clothes, bedclothes and trash, were calculated. Materials and Methods: The number of iodine therapy ward was 15 in Korea Institute of Radiological Medical and Sciences. Recently, 8 therapy wards were operated for iodine therapy patients and others were on standby for emergency treatment ward of any radiation accidents. Radioactive wastes, which were occurred in therapy ward, were clothes, bedclothes, bath cover for patients washing water and food and drink which was leftover by patients. Each sample was hold into the marinelli beaker (clothes, bedclothes, bath covers) and 90 ml beaker (food, drink, and washing water). The activities of collected samples were measured by HpGe MCA device (Multi Channel Analysis, CANBERRA, USA) Results: The storage period for the each kind of radioactive wastes was calculated by equation of storage periods based on the measurement outcomes. The average storage period was 60 days for the case of clothes, and the maximum storage period was 93 days for patient bottoms. The average storage period and the maximum storage period for the trash were 69 days and 97 days, respectively. The leftover foods and drinks had short storage period (the average storage period was 25 days and maximum storage period was 39 days), compared with other wastes. Conclusion: The proper storage period for disposing the radioactive waste (clothes, bedclothes and bath cover) was 100 days by the regulation on self-disposal of radioactive waste. In addition, the storage period for disposing the liquid radioactive waste was 120 days. The current regulation for radioactive waste self-disposing was not suitable for the circumstances of each radioactive therapy facility. Therefore, it was necessary to reduce the leftover food and drinks by adequate table setting for patients, and improve the process and regulation for disposing the short-half life radioactive wastes.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.2
• /
• pp.156-161
• /
• 2012

Purpose : IRMA method for the experimental reagents, as set out in the manual settings for doing and reporting the test results should, in principle. But many of the reagents allows for the setting of the plot does not have a lot of information. Depending on the angle setting of the table make a difference in test results and what settings are best suited to investigate. Materials and Methods : The hospital has Boramae DREAM10, Cobra, SR-300's using the Immunotech TSH reagents have been compared with the measurements. Since then there using EXCEL calculation of the equipment compared with the measurement. Results : In the comparison between each piece of equipment 1.SR-300: DREAM 10 y = 1.1376x - 0.046 (LOG-LOGIT), 2.SR-300: COBRA y = 1.0985x + 0.042 (LOG-LOG) 3.DREAM10: COBRA y = 0.965x + 0.0887 (LOG-LOG) was the result. In all charts the same X, Y axis, X values were good in general when you have. Linear-Logit value of Cobra Dream10 and Excel tends to match the calculated values provided. Conclusion : Is to guide the B / max, B / Total Logit Y axis of the chart is set to draw a look at the value equation when the X-axis LOG a high concentration are disadvantages rising urgently toward the slope. Linear-Logit plots close to the straight line has a curve. If you have a chart to guide on setting AS setting and therefore, set to guide the absence of information on the need to set up the experiment are thought to pass through.

• Journal of Food Hygiene and Safety
• /
• v.14 no.3
• /
• pp.293-304
• /
• 1999

The purpose of this study was to evaluate the microbiological quality, and to assure the hygienic safety of the food production in the university food service facility located in Seoul in accordance with the Hazard Analysis Critical Control Point(HACCP) concepts. In the hygienic state assessment of kitchen, it has revealed that it was very important to remove water from the kitchen floor and to establish standard method for disinfection of cooking utensils. And foodservice workers were required to have training program for the safe handling of food and utensils since they did treat food without hygienic gloves. The kitchen layout had to be improved because the near distance of table with heating unit and shelf might cause the growth of microorganisms when prepared food was kept on the shelf. In terms of the timetemperature measurement and microbiological quality assessment during each of the food production phases, most of sengchae (raw vegetable dish) and namul (cooked vegetable dish) were treated within danger zone for food safeness ($5~60^{\circ}C$). It has shown that the microbiological quality of raw materials was very much inferior at the time of receiving based on the TPC($10^{5}~10^{7}$), coliform($10^{3}~1O^{6}$), which was not acceptable level(TPC:$10^{6}$, coliform:$10^{3}$) suggested by Solberg. Microbiological growth has increased in the both of sengchae and namul considerably during most of food production phase. Therefore, it is extremely important to reduce holding and serving time and to avoid treating food within the danger zone for food safeness. In addition, the prevention of cross-contamination during mixing the ingredients with improper equipments and with insanitary treatments by workers was also important to keep the food safety in this speciqic university foodservice facility.

• Journal of Preventive Medicine and Public Health
• /
• v.33 no.2
• /
• pp.215-225
• /
• 2000

Objective : The purpose of this study was to examine the therapeutic compliance and its related factors in the rural hypertensives. Method : A questionnaire survey and blood pressure measurement were performed to 3,876 residents of a rural area, and 660 hypertensives were selected as subjects of study. The study employed a hypothetical model which was composed of constructs from the health belief model and KAP model. The analysis techniques employed included contingency table analysis and structural equation modeling. Result : The proportion of those who were compliant to the treatment of hypertension was 44.2% of subjects. As the result of structural equation modeling, when patients had more favorable attitude toward treatment, higher perceived benefit, or lower perceived barriers to treatment, the therapeutic compliance was significantly higher(T>2.0). When patients had more knowledge about hypertension, or higher perceived severity of hypertension, the attitude toward the treatment of hypertension was more favorable significantly(T>2.0). And when patients had the support for treatment from family or neighbor, the attitude toward treatment was more favorable(T>2.0). When patients had experience of health education, they had more knowledge, higher perceived susceptibility of complication, perceived severity for hypertension, and perceived benefit of treatment, compare to patients without health education(T>2.0). Conclusion : In consideration of above findings, in order to improve the therapeutic compliance in the rural hypertensives, it would be necessary to change attitude, perception, knowledge about hypertension and its treatment, by various methods such as effective health education and programs for maintaining the supportive environment for hypertension treatment.

• Journal of Korean Society of Disaster and Security
• /
• v.13 no.1
• /
• pp.25-39
• /
• 2020

Despite the global promotion of Smart City, there is currently no standard for smart water grid development, and it is not possible to judge the success of Smart City. There is a clear need to establish the requirements and goals of the Smart Water Grid and accurately diagnose and improve the limitations and problems of the existing Smart Water Grid. For this purpose, it is very important to use the index suitable for Smart Water Grid goals. In this study, we developed Smart Water Grid Index which can be used to evaluate the target measurement and attainment of Smart Water Grid and can be utilized based on the implementation plan for Smart Water Grid in the future. Through the development of the Smart Water Grid Key Performance Index (SWG KPI), we will lay the groundwork for continuous capacity evaluation of the Smart Water Grid and improve the reliability of the Index. It is expected that it will be possible to prepare and evaluate a Challenge Evaluation Card for the planned Smart Water Grid by providing an evaluation table for grid competency evaluation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.6
• /
• pp.538-545
• /
• 1991

This study measured the daily intake and excretion of sodium and potassium of eight 20-26years old college men during four weeks by means of analyzing their food intake, urine and feces, keeping their normal living pattern and body weight. This study also compared the actual measurement value of sodium and potassium intake by atomic absorption spectrophotometer with the conversion value of them by food table. The results are as follows ; Daily mean sodium intakes conversed ($2.36{\pm}0.03g/day$) was about 63% lower than those intakes meansured($6.36{\pm}0.13g/day$). Daily mean potassium intakes conversed($1.71{\pm}0.03g/day$) was not different of sodium and potassium were $5.49{\pm}0.19g/day\;and\;1.33{\pm}0.08g/day$, respectively. Daily mean fecal excretions of sodium and potassium were $0.24{\pm}0.02g/day\;and\;0.45{\pm}0.03g/day$, respectively. Mean prooportion of Na/K in urine was $4.3{\pm}0.1$.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.2
• /
• pp.78-86
• /
• 2013

The researches for reduce $CO_2$ are going along animatedly in hole industry area. In construction area, the researches to minimize $CO_2$ emission are progressing variously. The researches to minimize $CO_2$ emission based on $CO_2$ emission. The method measuring $CO_2$ emission are using $CO_2$ emission coefficient on fuel consumption, LCA and an inter-industry relation table. Especially, the methods using the carbon emission coefficient based on fuel consumption are 3 types(Tier1~Tier3) of IPCC. Present, the most using method(Tier1) is using the fuel consumption and the carbon emission coefficient. But because this method do not effect each vehicle distance and driving environment, we can't calculate right $CO_2$ emission. Especially construction project's $CO_2$ emission could be different by project's characteristic. However, we can't apply these difference with present methods. So we need methodology calculating $CO_2$ emission by applying personal project's characteristic and these methodology's most important things is directly measuring $CO_2$ emission of construction equipment which use energy. The object of this study is to develop the $CO_2$ emission calculation methodology which occur in construction process, is to suggest ways to measure in real time $CO_2$ emission from construction equipment.

• Smart Structures and Systems
• /
• v.20 no.5
• /
• pp.549-562
• /
• 2017

The US railroad network carries 40% of the nation's total freight. Railroad bridges are the most critical part of the network infrastructure and, therefore, must be properly maintained for the operational safety. Railroad managers inspect bridges by measuring displacements under train crossing events to assess their structural condition and prioritize bridge management and safety decisions accordingly. The displacement of a railroad bridge under train crossings is one parameter of interest to railroad bridge owners, as it quantifies a bridge's ability to perform safely and addresses its serviceability. Railroad bridges with poor track conditions will have amplified displacements under heavy loads due to impacts between the wheels and rail joints. Under these circumstances, vehicle-track-bridge interactions could cause excessive bridge displacements, and hence, unsafe train crossings. If displacements during train crossings could be measured objectively, owners could repair or replace less safe bridges first. However, data on bridge displacements is difficult to collect in the field as a fixed point of reference is required for measurement. Accelerations can be used to estimate dynamic displacements, but to date, the pseudo-static displacements cannot be measured using reference-free sensors. This study proposes a method to estimate total transverse displacements of a railroad bridge under live train loads using acceleration and tilt data at the top of the exterior pile bent of a standard timber trestle, where train derailment due to excessive lateral movement is the main concern. Researchers used real bridge transverse displacement data under train traffic from varying bridge serviceability levels. This study explores the design of a new bridge deck-pier experimental model that simulates the vibrations of railroad bridges under traffic using a shake table for the input of train crossing data collected from the field into a laboratory model of a standard timber railroad pile bent. Reference-free sensors measured both the inclination angle and accelerations of the pile cap. Various readings are used to estimate the total displacements of the bridge using data filtering. The estimated displacements are then compared to the true responses of the model measured with displacement sensors. An average peak error of 10% and a root mean square error average of 5% resulted, concluding that this method can cost-effectively measure the total displacement of railroad bridges without a fixed reference.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.3
• /
• pp.251-257
• /
• 2013

In this study, ultraviolet protection factor (Sun Protection Factor, SPF) was investigated to provide basic data for subject safety and research of ultraviolet (UV) irradiation test in the future. Trial subjects (395 people) of skin type I, II, and III were evaluated according to skin type standard table. After measuring the skin color using a colorimeter, ITA (Individual Typology Angle) value was calculated. Subjects with 28 and above ITA value were positioned comfortably to be UV irradiated for 60 s and erythema was evaluated 24 hours after application. MED (Minimal Erythema Dose) was investigated where the minimal amount of erythema existed among UVB irradiated area. Statistical analysis was investigated using Statistical Package the Social Sciences program. As a result, the darker skin color results in the higher MED value since the higher skin type number results increased MED value and female has higher MED value than male since female has darker skin type than male. There was no relation between MED difference by ages in all different ages. However, it is hard to draw a conclusion as above since the number of subjects were not sufficient to support statistical significance for MED values by different ages. However, MED values by skin types obtained through this study can be used as a standard when MED value is expected to evaluate efficacy of sunscreen product and as basic data for further safety of clinical researches.