• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.11
• /
• pp.58-66
• /
• 1998

A low power consuming laser scanning vibrometer is studied for its development. For its optical system, a laser interferometer is constructed to use the Doppler effect. In order to reduce the driving power of the scanning system, a small displacement of the scanning system is produced, which is achieved by using a magnetostrictive actuator. A sufficient rotating angle of the scanning system is obtained by using an amplified displacement from the resonant phenomena of a second order mechanical system composed of a mass and spring. The control of the magnetostrictive actuator using a Terfenol-D is performed without using a feedback system to help reduce the power consumption. The vibration analysis is made for the sinusoidal scanning input to have the space domain information from the time domain of the velocity of a vibration object. As a partial work of development of a tow power consuming laser scanning vibrometer, in this work, a scanning system which has the above features is developed and experimentally investigated. For the purpose of the optical system calibration, the vibration measurement for one axis is presented and the future works are discussed.

• Current Optics and Photonics
• /
• v.5 no.4
• /
• pp.384-390
• /
• 2021

This paper presents a wide-range tunable wavelength-locking technology based on optoelectronic oscillation (OEO) loops for optical fiber sensors and microwave photonics applications, explains the theoretical fundamentals of the design, and demonstrates a method for locking the relative wavelength differences between a leader semiconductor laser and its follower lasers. The input of the OEO loop in the proposed scheme (the relative wavelength difference) determines the radio-frequency (RF) signal frequency of the oscillation output, which is quantized into an injection current signal for feedback to control the wavelength drift of follower lasers so that they follow the wavelength change of the leader laser. The results from a 10-hour continuous experiment in a field environment show that the wavelength-locking accuracy reached ±0.38 GHz with an Allan deviation of 6.1 pm over 2 hours, and the wavelength jitter between the leader and follower lasers was suppressed within 0.01 nm, even though the test equipment was not isolated from vibrations and the temperature was not controlled. Moreover, the tunable range of wavelength locking was maintained from 10 to 17 nm for nonideal electrical devices with limited bandwidth.

• The Journal of Korean Society for Neurotherapy
• /
• v.22 no.3
• /
• pp.25-29
• /
• 2018

Purpose In this study, 45 students were divided into task - oriented group, task - oriented intermittent group, and continuous group, and the effect of each variable on learning was changed to angle of the arms' we checked. Methods This study was conducted for 45 days from March 13 to 18, 2017 for five days in the 20 generals living in Changwon city. Dart and goniometer were used for the measurement. In the exercise program, darts were placed on a smooth, hard surface of 1.5M height and the distance to the subject was set 1.5m away. In the dart throw practice, all three groups were marked with an elbow flexion $30^{\circ}$ on the wall, and the subjects were instructed to throw the dart at that point. Results Comparisons between groups showed significant differences between the continuous task-oriented training group and the intermittent task-oriented training group and the control group at the end of training (*** P <0.001). Conclusion This study showed that the intermittent task-oriented training method showed the highest effect (*** P <0.001), which proved that the intermittent method is the most effective exercise method among the three groups.

• Korean Journal of Applied Biomechanics
• /
• v.29 no.1
• /
• pp.1-8
• /
• 2019

Objective: The purpose of this study was to confirm that the cross-country ski sprint course in PyeongChang, where the 2018 Winter Olympics course was to utilize wearable devices equipped with inertial measurement unit (IMU), global positioning system (GPS) and heart rates sensor. Method: For the data collection, two national level cross-country (XC) skiers performed classic technique on the entire sprint course. We analyzed cycle characteristics, range of motion on double poling (DP) technique, average velocity, and displacement of 3 points according to the terrain. Results: The absolute cycle time gradually decreased during starting, middle and finish sections. While the length of the DP increased and the heart rates tended to increase for men skier. In addition, the results indicated that range of motion of knee joint during starting and finish section decreased more than middle section. The errors of latitude and longitude data collected through GPS were within 3 m from 3 points. Conclusion: Through the first case study in Korea, which analyzed the location and condition of XC skiers in the entire sprint course in real time, confirmed that feedback was available in the field using various wearable sensors.

• Journal of Distribution Science
• /
• v.19 no.2
• /
• pp.37-44
• /
• 2021

Purpose: O2O (Online to Offline) is an internet-based platform. The purpose of this study is to confirm the effect of service quality of O2O food delivery service on service satisfaction, and whether customer orientation mediates the relationship between service quality and service satisfaction. Research design, data and methodology: This paper surveyed Chinese consumers using the O2O food delivery platform through a questionnaire technique. Smart PLS 3.0 was used to verify the hypothesis of this study. PLS is characterized by the advantage of minimizing measurement errors and maximizing the influence of each factor. Results: It was confirmed that O2O food delivery companies need to increase service quality (information quality, product quality, and social quality, system quality) in order to obtain customer satisfaction. Additionally, the perceived customer orientation was found to completely mediate the relationship between perceived service quality (information quality, product quality) and perceived service satisfaction. Conclusions: The service level of the O2O delivery company to the customer's request when a problem occurs in the customer's order must be raised to increase the customer's satisfaction. For example, timely response to customer inquiries and timely feedback of delivery information to customers during the delivery process should improve the quality of after-sales service.

• ETRI Journal
• /
• v.42 no.6
• /
• pp.837-845
• /
• 2020

The objective of this study was to implement an in vitro exposure system for 28 GHz to investigate the biological effects of fifth-generation (5G) communication. A signal source of 28 GHz for 5G millimeter-wave (MMW) deployment was developed, followed by a variable attenuator for antenna input power control. A power amplifier was also customized to ensure a maximum output power of 10 W for high-power 28-GHz exposure. A 3-dB uniformity over the 80 mm × 80 mm area that corresponds to four Petri dishes of three-dimensional cell cultures can be obtained using a customized choke-ring-type antenna. An infrared camera is employed for temperature regulation during exposure by adjusting the airflow cooling rate via real-time feedback to the incubator. The reported measurement results confirm that the input power control, uniformity, and temperature regulation for 28-GHz exposure were successfully accomplished, indicating the possibility of a wide application of the implemented in vitro exposure system in the fields of various MMW dose-response studies.

• Journal of Korea Multimedia Society
• /
• v.24 no.3
• /
• pp.355-372
• /
• 2021

Recently, high-performance HMDs (Head-Mounted Display) are becoming wireless due to the growth of virtual reality technology. Accordingly, environmental constraints on the hardware usage are reduced, enabling multiple users to experience virtual reality within a single space simultaneously. Existing multi-user virtual reality platforms use the user's location tracking and motion sensing technology based on vision sensors and active markers. However, there is a decrease in immersion due to the problem of overlapping markers or frequent matching errors due to the reflected light. Goal of this study is to develop a multi-user virtual reality moving platform in a single space that can resolve sensing errors and user immersion decrease. In order to achieve this goal hybrid sensing technology was developed, which is the convergence of vision sensor technology for position tracking, IMU (Inertial Measurement Unit) sensor motion capture technology and gesture recognition technology based on smart gloves. In addition, integrated safety operation system was developed which does not decrease the immersion but ensures the safety of the users and supports multimodal feedback. A 6 m×6 m×2.4 m test bed was configured to verify the effectiveness of the multi-user virtual reality moving platform for four users.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.6
• /
• pp.37-46
• /
• 2021

In this paper, we designed and implemented a program to measure and to judge the accuracy of yoga postures using Azure Kinect. The program measures all joint positions of the user through Azure Kinect Camera and sensors. The measured values of joints are used as data to determine accuracy in two ways. The measured joint data are determined by trigonometry and Pythagoras theorem to determine the angle of the joint. In addition, the measured joint value is changed to relative position value. The calculated and obtained values are compared to the joint values and relative position values of the desired posture to determine the accuracy. Azure Kinect Camera organizes the screen so that users can check their posture and gives feedback on the user's posture accuracy to improve their posture.

• Journal of the Korean Society of Physical Medicine
• /
• v.16 no.3
• /
• pp.55-64
• /
• 2021

PURPOSE: The purpose of this study was to apply dynamic neuromuscular stabilization (DNS) to subjects with forward head posture (FHP) and to compare its effects on respiratory function as against the conventional neck stabilization exercise and neck stretching and extensor strengthening exercises. METHODS: The whole-body posture measurement system was used to measure the degree of FHP, and a spirometer and a respiratory gas analyzer were used to measure the respiratory function. After the intervention was completed, the changes over time were analyzed in the DNS group, the neck stabilization exercise group, and the neck stretching and extensor strengthening exercise group. The inter-group difference in the changes was also analyzed. A repeated ANOVA was performed to compare the respiratory function according to the period between the three groups, and the least significant difference (LSD) method was used for the post hoc test. RESULTS: After the 6-week exercise period, respiratory functions, such as forced vital capacity (FVC), forced expiratory volume for 1 second (FEV1), forced expiratory volume for 1 sec/forced vital capacity (FEV1/FVC), maximum oxygen intake (VO₂max), and the volume of expired gas (VE), significantly improved according to the period (p < .05), but no inter-group differences were found. CONCLUSION: DNS is an effective training method, and can be applied along with neck stabilization exercise and neck stretching and extensor strengthening exercises, which are widely used in clinical practice, to people with FHP who cannot directly perform neck exercises to improve their respiratory function.

• International journal of advanced smart convergence
• /
• v.12 no.2
• /
• pp.159-166
• /
• 2023

Due to the aging workforce in the construction industry in South Korea, the accident rate has been increasing. The cognitive abilities of older workers are closely related to both safety incidents and labor productivity. Therefore, there is a need to improve cognitive abilities through personalized training based on cognitive assessment results, using cognitive training content, in order to enable safe performance in labor-intensive environments. The provided cognitive training content includes concentration, memory, oreintation, attention, and executive functions. Difficulty levels were applied to each content to enhance user engagement and interest. To stimulate interest and encourage active participation of the participants, the difficulty level was automatically adjusted based on feedback from the MMSE-DS results and content measurement data. Based on the accumulated data, individual training scenarios have been set differently to intensively improve insufficient cognitive skills, and cognitive training programs will be developed to reduce safety accidents at construction sites through measured data and research. Through such simple cognitive training, it is expected that the reduction of accidents in the aging construction workforce can lead to a decrease in the social costs associated with prolonged construction periods caused by accidents.