• Journal of Korean Association for Spatial Structures
• /
• v.17 no.3
• /
• pp.35-43
• /
• 2017

The Hong Nang Sida temple is a cultural heritage that must be preserved due to the historical and cultural values that are highly evaluated in the world. The main sanctuary of Hong Nang Sida temple, presumed to have been built in 11th to 12th centuries, has been exposed in the open air for a long time after the collapse. Therefore, it is necessary to reconstruct the original shape of the Hong Nang Sida temple to reflect the original shape. To do this, it is necessary to examine the overall structure according to the restoration shape. For this purpose, this study analyzes the construction and configuration types for main sanctuary Mandapa of Hong Nang Sida temple, and conducts structural modeling according to actual and restoration plans. The structural and behavioral characteristics are analyzed by comparing stress and displacement values by measurement locations. In addition, we will examine the vertical load distribution by the layers of each wall and cobel arch of the Mandapa using the load distribution method.

• Journal of Child Welfare and Development
• /
• v.16 no.2
• /
• pp.109-135
• /
• 2018

The purpose of this study was to analyze the longitudinal causal relationship between caregiver relations and peer relations of children in out-of-home care. We analyzed the three years(2011-2013) of longitudinal data from the Panel Study on Korean Children in Out-of-Home Care. The autoregressive cross-lagged model (ARCL) was used to measure the longitudinal causal relationship between caregiver relations and peer relations. As a result, first, caregiver relations and peer relations showed stability over time. In other words, the results of the measurement at three time points showed that the caregiver relations and peer relations at the previous time had a significant effect on the caregiver relations and peer relations at the later time point. Second, the previous caregiver relations had a significant effect on the subsequent peer relations over time. Third, the previous peer relations had a significant effect on the subsequent caregiver relations over time. This study confirmed the interrelationships of caregiver relations and peer relations of children in care by examining the longitudinal data using the longitudinal analysis method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.6
• /
• pp.1882-1892
• /
• 1996

This paper is concerned with the position control of the ond degree-of freedom manipulator using pneumatic artificial muscle actuator which is built to have a proper compliance. For t his pneumatic artificial muscle actuator though, it is difficult to make an effective control scheme due to the nonlinearity and uncertainties on the dynamics of the actuator. In this paper, a third-order equation of motion is derived for the actuator including the dynamics of the pneumatic servovalve. Later, various modeling uncertainties due to the nonlinearity and unmodeled dynamics of the servo vlave and the actuator are taken care of, as a trade-off between the closed-loop performance of the controlled system and its robustness to uncertainties. A controller using .mu. synthesis thchnique is designed, and robust performance against measurement noise, various modeling uncertainties due to the dynamics of the servo valve and actuator is achieved. The effectiveness of the proposed control methods is illustrated through simulations and experiments.

• Structural Engineering and Mechanics
• /
• v.15 no.3
• /
• pp.285-297
• /
• 2003

Complementing recent advances made in the field of structural health monitoring and damage detection, the concept of a wireless sensing network with distributed computational power is proposed. The fundamental building block of the proposed sensing network is a wireless sensing unit capable of acquiring measurement data, interrogating the data and transmitting the data in real time. The computational core of a prototype wireless sensing unit can potentially be utilized for execution of embedded engineering analyses such as damage detection and system identification. To illustrate the computational capabilities of the proposed wireless sensing unit, the fast Fourier transform and auto-regressive time-series modeling are locally executed by the unit. Fast Fourier transforms and auto-regressive models are two important techniques that have been previously used for the identification of damage in structural systems. Their embedment illustrates the computational capabilities of the prototype wireless sensing unit and suggests strong potential for unit installation in automated structural health monitoring systems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.200-203
• /
• 2007

Devices of junction barrier schottky(JBS) structure using 4H-SiC substrates with wide energy band gaps was designed and fabricated. As a measurement results, the device of reverse I-V characteristics was shown as more than 1000 V, its design optimum length of p-grid was $3{\mu}m$ space. In this paper, I-V characteristics was modeled by using of device fabricated process conditions parameters and it was extracted that the I-V property parameters, and it was compared and analyzed with between device parameters and model parameters.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.7
• /
• pp.974-982
• /
• 2004

The purpose of this study was to examine the influence of belief in body control on appearance satisfaction using structural equation modeling. In the structural equation model, self-esteem was included as a common predictor variable of belief in body control and appearance satisfaction, and the ideal body type and perceived body type were included as mediator variables. The data was collected from 96 female college students in the State of Washington, United States, Using AMOS 4, confirmatory factor analyses were conducted to fit the measurement models, and then the fit of the structural model was examined. The results of this study are as follows: The indirect effect of belief in body control on appearance satisfaction through its negative effect on ideal body type was significant. Yet, the direct path of belief in body control to appearance satisfaction and the indirect path through their common relationships with self-esteem were found not significant. These results indicate that higher body control belief may lead to lower appearance satisfaction due to the decreased size of ideal body type.

• Korean System Dynamics Review
• /
• v.7 no.1
• /
• pp.147-172
• /
• 2006

With the purpose of long-range planning toward local/regional sustainable development, it is desired to avoid unconditional industrialization and expansion and to build an eco-oriented development strategy considering site-specific characteristics of the environment. This paper thus aims at the elaboration of a system dynamics model of a locality/region so as to understand inherent dynamics of sustainable development and to assess the effectiveness of such an eco-oriented strategy. The model thus consists of several positive and negative feedback loops that accelerate or restrict local/regional economic growth within a system boundary incorporating the environment, economy, and society. The model is moreover applied to the assessment of the effectiveness of the development plan recently established in Damyang in JeollaNamdo, Korea. It is regarded in this case to be effective for population immigration and economic prosperity to give priority to restore the bamboo ecosystem and nourish a series of eco-friendly industries based on the bamboo items developed recently. It is also to be positive to sustainable development since it enables to maintain high quality of the environment from the outset of their development steps.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.298-305
• /
• 2010

In this paper, a new algorithm of optimal Volt/Var Control is proposed using Volt/Var control for the Distribution Automation System (DAS) with Distributed Generation (DG) based on the modeling of the distributed load and the distributed current. In the proposed, algorithm based on the modeling of the distributed load and the distributed current are estimated from constants of four terminals using the measurement of the current and power factor from a Feeder Remote Terminal Unit (FRTU) and DG data from RTU for DG. For the optimal Volt/Var Control, the gradient method is applied to find optimal solution for tap, capacity and power control of OLTC (On-Load Tap Changers), SVR (Step Voltage Regulator), PC (Power Condenser) and DG (Distributed Generation). In the case studies, the estimation and control of the voltages have been testified in a radial distribution system with DG using matlab program.

• Advances in Computational Design
• /
• v.1 no.3
• /
• pp.235-251
• /
• 2016

We have performed a design optimization of a stiffened panel with curvilinear stiffeners using an artificial neural network (ANN) residual kriging based surrogate modeling approach. The ANN residual kriging based surrogate modeling involves two steps. In the first step, we approximate the objective function using ANN. In the next step we use kriging to model the residue. We optimize the panel in an iterative way. Each iteration involves two steps-shape optimization and size optimization. For both shape and size optimization, we use ANN residual kriging based surrogate model. At each optimization step, we do an initial sampling and fit an ANN residual kriging model for the objective function. Then we keep updating this surrogate model using an adaptive sampling algorithm until the minimum value of the objective function converges. The comparison of the design obtained using our optimization scheme with that obtained using a traditional genetic algorithm (GA) based optimization scheme shows satisfactory agreement. However, with this surrogate model based approach we reach optimum design with less computation effort as compared to the GA based approach which does not use any surrogate model.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.10
• /
• pp.2008-2017
• /
• 2002

Joint structure of a transducer horn-holder assembly fur a wire bonder was examined through FEM contact analysis. A three dimensional modeling and analysis was carried out to survey the internal physics of this structure and to prove the accuracy of a computation compared to a measurement. After validation, a simple two dimensional model was built fur various parametric study considering the efficiency and speed of the computation. Several factors such as boundary conditions, a modeling boundary, mesh density and so on, were considered to obtain consistency with three dimensional analysis. An arc angle and a position of each holder boss were chosen as design parameters. A design of experiment was applied to find out an optimized design of the holder geometry. As a result, a guideline for holder boss design was suggested and main factors and their influence on stress concentration in the transducer horn were surveyed.